- Acc - mailweb.openeuler.org

[PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 26 Oct '22

26 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit resend: fix uadk lib, still use <uadk/wd_cipher.h> Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 94 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1141 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1339 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.38.1

2 16

UADK双周例会
by openEuler conference 26 Oct '22

26 Oct '22

您好！ sig-AccLib SIG 邀请您参加 2022-10-26 11:00 召开的Zoom会议会议主题：UADK双周例会会议内容： zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论 2.pkg-config技术分享会议链接：https://us06web.zoom.us/j/81869388219?pwd=K0ltZk9kSTRUS2RSNFFnS3NKSDNodz09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-10-26 11:00, The subject of the conference is UADK双周例会, Summary: zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论 2.pkg-config技术分享 You can join the meeting at https://us06web.zoom.us/j/81869388219?pwd=K0ltZk9kSTRUS2RSNFFnS3NKSDNodz09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 24 Oct '22

24 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 88 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1145 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1337 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

2 12

[PATCH 00/10] uadk_engine: some bugfix and cleanup
by Zhiqi Song 21 Oct '22

21 Oct '22

This is a patch set about some bugfix and cleanup of uadk_engine. Hao Fang (1): uadk_engine: use HW_V2/HW_V3 to distinguish different hardware platforms. Longfang Liu (1): uadk/engine: Update the numa parameter of the scheduler Zhiqi Song (8): sm2: bugfix about segfault in sm2 ctrl function uadk_engine: bugfix side effects of right operand uadk_engine: cleanup avoid modify param of functions rsa: cleanup uninitialized value uadk_engine: cleanup storage class position uadk_engine: bugfix enable environment variable uadk_engine: cleanup magic number and comments uadk_engine: cleanup header file -- 2.30.0

1 10

[PATCH v5 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 21 Oct '22

21 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit Update in v5 Patch 1 fixes the build issue when uadk is installed to a specific folder And update doc accordingly Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 94 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1141 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1339 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.38.1

1 6

[PATCH] bus/vdev: vdev_cleanup checks dev->device.driver
by Zhangfei Gao 20 Oct '22

20 Oct '22

The vdev_probe calls driver->probe, which may fail and dev->device.driver will still be NULL. In vdev_cleanup, drv = container_of(dev->device.driver) returns !NULL, then drv->remove will trigger Segmentation fault. Fix it by checking dev->device.driver first. Log: Thread 1 "dpdk-test" received signal SIGSEGV, Segmentation fault. 0x00000000012c484d in vdev_cleanup () Signed-off-by: Zhangfei Gao <zhangfei.gao(a)linaro.org> --- drivers/bus/vdev/vdev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bus/vdev/vdev.c b/drivers/bus/vdev/vdev.c index f5b43f1930..fbdaf68380 100644 --- a/drivers/bus/vdev/vdev.c +++ b/drivers/bus/vdev/vdev.c @@ -577,6 +577,9 @@ vdev_cleanup(void) const struct rte_vdev_driver *drv; int ret = 0; + if (dev->device.driver == NULL) + continue; + drv = container_of(dev->device.driver, const struct rte_vdev_driver, driver); if (drv == NULL || drv->remove == NULL) -- 2.36.1

2 6

crypto/uadk: introduce uadk crypto driver
by Akhil Goyal 20 Oct '22

20 Oct '22

Hi everyone, We have a new crypto PMD submitted on ML (http://patches.dpdk.org/project/dpdk/cover/20221008083747.6559-1-zhangfei.g…) This PMD is dependent on an external library which needs to be cross compiled for ARM on x86. It mandatorily need "numactl" also cross-compiled and instead of using pkg-config of libnuma, it need the library and headers to be copied manually to aarch toolchain. And if that is also done, it is not generating pkg-config which DPDK can use to compile the PMD. So the question is whether we can accept the PMD without pkg-config and along with above dependency? Regards, Akhil

3 9

[PATCH resend v3 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 14 Oct '22

14 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit resend: Rebase on next/for-main, which just merged series "cryptodev: rework session framework". update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patch. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 74 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 36 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1145 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1329 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

2 14

Fw:Re: query about glibc 2.35 hugetlb
by Zhangfei Gao 12 Oct '22

12 Oct '22

  ------------------ Original ------------------ From: "Adhemerval Zanella Netto" <adhemerval.zanella(a)linaro.org>gt;; Date: Mon, Oct 10, 2022 08:11 PM To: "Zhangfei Gao"<zhangfei.gao(a)linaro.org>gt;; Subject: Re: query about glibc 2.35 hugetlb On 10/10/22 04:54, Zhangfei Gao wrote: > Hi, Adhemerval > Hi Zhangfei Gao, > We are using libhugetlbfs feature to concur the tlb miss issue. > LD_PRELOAD=/usr/lib/aarch64-linux-gnu/libhugetlbfs.so HUGETLB_MORECORE=yes app > > Happened to find morecore will be deprecated in glibc, 2.32+ The bug reports is incorrect, it was deprecated in glibc 2.34 and I have implemented glibc.malloc.hugetlb for 2.35.  So only glibc 2.34 does not have a way to explicit back up malloc allocation with hugetbl without using a full allocation (such as jemalloc or tcmalloc). > https://github.com/libhugetlbfs/libhugetlbfs/issues/52 > > Thanks for your patch adding  glibc.malloc.hugetlb. > But  still don't know how to use this feature. > >> If using glibc 2.35, do we still need libhugetlbfs.so? It will depends whether your application need to use HUGETLB_ELFMAP and/or HUGETLB_SHM since it is not implemented on glibc.  The HUGETLB_ELFMAP requires a lot of hacks and kernel/toolchain have worked to make THP to work better with text and data segments, and I think it is unlikely that we will support on glibc anytime soon (it will most likely require changes in the ELF gnu extension to explicit use huge pages). For HUGETLB_SHM it should be easy to adapt the code to align to page size and add SHM_HUGETLB. I think it might be doable to add support on glibc with an extra tunable as well to avoid code changes in the application.  I still prefer to adapt the the application itself because libhugetlbfs subtly change shmget semantic under the hood (by changing memory alignment and segment). >> Or just run "GLIBC_TUNABLES=glibc.malloc.hugetlb=2 app"? Based on the command line you pasted, it should be only that.  It will cover all memory allocation done by malloc. > > I am still in checking how to upgrading to glibc 2.35 in system. Carlos O'Donnel from RH was thinking about backporting to old releases if

1 0

UADK周例会
by openEuler conference 11 Oct '22

11 Oct '22

您好！ sig-AccLib SIG 邀请您参加 2022-10-12 11:00 召开的Zoom会议会议主题：UADK周例会会议内容： zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.uadk版本节奏 2.交叉编译改进 3.自由讨论会议链接：https://us06web.zoom.us/j/85494335620?pwd=Mm81N2xRWC9DbytUdFhpTW9mR2N1UT09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-10-12 11:00, The subject of the conference is UADK周例会, Summary: zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.uadk版本节奏 2.交叉编译改进 3.自由讨论 You can join the meeting at https://us06web.zoom.us/j/85494335620?pwd=Mm81N2xRWC9DbytUdFhpTW9mR2N1UT09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

2025

2024

2023

2022

Acc