- Compass-ci - mailweb.openeuler.org

[PATCH v6 compass-ci 1/3] assign-account: add check for assign account
by Luan Shengde 07 Nov '20

07 Nov '20

check required my info when assigning account [why] my info is required when assigning the account and config the default yaml file [how] add check for my info before assign account my info: - my_email - my_name - my_uuid Signed-off-by: Luan Shengde <shdluan(a)163.com> --- container/assign-account/assign-account.rb | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/container/assign-account/assign-account.rb b/container/assign-account/assign-account.rb index e356c18..834f666 100755 --- a/container/assign-account/assign-account.rb +++ b/container/assign-account/assign-account.rb @@ -7,7 +7,7 @@ require 'sinatra' require 'open3' require 'json' require 'yaml' -require_relative 'get_account_info.rb' +require_relative 'get_account_info' set :bind, '0.0.0.0' set :port, 29999 @@ -17,8 +17,17 @@ get '/assign_account' do data = YAML.safe_load request.body.read rescue StandardError => e puts e.message + puts e.backtrace end + check_to_assign_account(data) +end + +def check_to_assign_account(data) + lacked_info = %w[my_email my_name my_uuid] - data.keys + error_message = "lack of my infos: #{lacked_info.join(', ')}." + raise error_message unless lacked_info.empty? + ref_account_info = AccountStorage.new(data) account_info = ref_account_info.setup_jumper_account_info -- 2.23.0

2 2

[PATCH compass-ci] add-software: change vmlinuz judge path
by Xu Xijian 06 Nov '20

06 Nov '20

[why] vmlinuz file is under $os_dir/boot/ now, so change the judge path Signed-off-by: Xu Xijian <hdxuxijian(a)163.com> --- container/add-software/run | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/container/add-software/run b/container/add-software/run index f4c6833..089efd2 100755 --- a/container/add-software/run +++ b/container/add-software/run @@ -2,7 +2,7 @@ # SPDX-License-Identifier: MulanPSL-2.0+ # Copyright (c) 2020 Huawei Technologies Co., Ltd. All rights reserved. -[ -L "$1/vmlinuz" -a -n "$2" ] || { +[ -L "$1/boot/vmlinuz" -a -n "$2" ] || { cat << 'EOF' Example usage: 1> ./run /os/centos/aarch64/7.6.1810 pack1 pack2 ... -- 2.23.0

1 0

[PATCH v2 compass-ci] jobfile_operate.cr: simplify if block
by Xu Xijian 06 Nov '20

06 Nov '20

[why] Somewhere there is only one line of code in if block, simply them with format "$cmd if $condition" Signed-off-by: Xu Xijian <hdxuxijian(a)163.com> --- src/scheduler/jobfile_operate.cr | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/src/scheduler/jobfile_operate.cr b/src/scheduler/jobfile_operate.cr index 68818ed..4ec9f96 100644 --- a/src/scheduler/jobfile_operate.cr +++ b/src/scheduler/jobfile_operate.cr @@ -56,11 +56,9 @@ module Jobfile::Operate end def self.parse_one(script_lines, key, val) - if valid_shell_variable?(key) - if val.as_h? - return false - end + return false if val.as_h? + if valid_shell_variable?(key) value = if val.as_a? shell_escape(val.as_a) else @@ -133,9 +131,7 @@ module Jobfile::Operate end # if the create job cpio failed, what to do? - if idd.match(/ERROR/) - puts idd - end + puts idd if idd.match(/ERROR/) # create result dir and copy job.sh, job.yaml and job.cgz to result dir src_dir = File.dirname(temp_yaml) dst_dir = File.join("/srv", job_content["result_root"].to_s) @@ -204,9 +200,7 @@ module Jobfile::Operate def self.auto_submit_job(job_file, override_parameter, other_parameters = nil) cmd = "#{ENV["LKP_SRC"]}/sbin/submit " - if other_parameters - cmd += other_parameters.join(" ") - end + cmd += other_parameters.join(" ") if other_parameters cmd += " -s '#{override_parameter}' #{job_file}" puts `#{cmd}` end -- 2.23.0

1 0

[PATCH compass-ci] jobfile_operate.cr: simplify if block
by Xu Xijian 06 Nov '20

06 Nov '20

[why] Somewhere there is only one line of code in if block, simply them with format "$cmd if $condition" Signed-off-by: Xu Xijian <hdxuxijian(a)163.com> --- src/scheduler/jobfile_operate.cr | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/src/scheduler/jobfile_operate.cr b/src/scheduler/jobfile_operate.cr index 68818ed..80cbcf7 100644 --- a/src/scheduler/jobfile_operate.cr +++ b/src/scheduler/jobfile_operate.cr @@ -57,9 +57,7 @@ module Jobfile::Operate def self.parse_one(script_lines, key, val) if valid_shell_variable?(key) - if val.as_h? - return false - end + return false if val.as_h? value = if val.as_a? shell_escape(val.as_a) @@ -133,9 +131,7 @@ module Jobfile::Operate end # if the create job cpio failed, what to do? - if idd.match(/ERROR/) - puts idd - end + puts idd if idd.match(/ERROR/) # create result dir and copy job.sh, job.yaml and job.cgz to result dir src_dir = File.dirname(temp_yaml) dst_dir = File.join("/srv", job_content["result_root"].to_s) @@ -204,9 +200,7 @@ module Jobfile::Operate def self.auto_submit_job(job_file, override_parameter, other_parameters = nil) cmd = "#{ENV["LKP_SRC"]}/sbin/submit " - if other_parameters - cmd += other_parameters.join(" ") - end + cmd += other_parameters.join(" ") if other_parameters cmd += " -s '#{override_parameter}' #{job_file}" puts `#{cmd}` end -- 2.23.0

2 2

[PATCH v4 lkp-tests 1/2] sbin/makepkg: support applying patch for PKGBUILD
by Lin Jiaxin 06 Nov '20

06 Nov '20

[Why] Support more version's PKGBUILD. [How] Replace the previous content with two source command. example: PKGBUILD_TAG=-1.1 BUILDFILE -> PKGBUILD BUILDFILE$PKGBUILD_TAG -> PKGBUILD-1.1 PKGBUILD-1.1 contains only the changed part. % cat PKGBUILD-1.1 pkgver=1.1 pkgrel=2 build() { make install DESTDIR="${pkgdir}/lkp/benchmarks/${pkgname}" } Signed-off-by: Lin Jiaxin <ljx.joe(a)qq.com> --- sbin/makepkg | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/sbin/makepkg b/sbin/makepkg index 25773621..fbe9c432 100755 --- a/sbin/makepkg +++ b/sbin/makepkg @@ -888,7 +888,7 @@ update_pkgver() { exit 1 fi sed --follow-symlinks -i "s:^pkgrel=[^ ]*:pkgrel=1:" "$BUILDFILE" - source_safe "$BUILDFILE" + source_safe "$BUILDFILE" "$BUILDFILE$PKGBUILD_TAG" local fullver=$(get_full_version) msg "$(gettext "Updated version: %s")" "$pkgbase $fullver" else @@ -1604,10 +1604,14 @@ cd_safe() { source_safe() { shopt -u extglob - if ! source "$@"; then - error "$(gettext "Failed to source %s")" "$1" - exit 1 - fi + local file + for file in "$@" + do + if ! source "$file"; then + error "$(gettext "Failed to source %s")" "$file" + exit 1 + fi + done shopt -s extglob } @@ -1626,7 +1630,6 @@ merge_arch_attrs() { source_buildfile() { source_safe "$@" - if (( !SOURCEONLY )); then merge_arch_attrs fi @@ -3661,6 +3664,7 @@ SRCEXT=${_SRCEXT:-$SRCEXT} GPGKEY=${_GPGKEY:-$GPGKEY} PACKAGER=${_PACKAGER:-$PACKAGER} CARCH=${_CARCH:-$CARCH} +PKGBUILD_TAG=$PKGBUILD_TAG if (( INFAKEROOT )); then if [[ -z $FAKEROOTKEY ]]; then @@ -3691,7 +3695,7 @@ else if [[ ${BUILDFILE:0:1} != "/" ]]; then BUILDFILE="$startdir/$BUILDFILE" fi - source_buildfile "$BUILDFILE" + source_buildfile "$BUILDFILE" "$BUILDFILE$PKGBUILD_TAG" fi # set defaults if they weren't specified in buildfile -- 2.23.0

1 0

help star
by Wu Fengguang 06 Nov '20

06 Nov '20

Jihui is our code star, thanks Jihui! wfg@crystal /c/todo% bin/help-star people/*/credit/2020-11-06.md 24.5 Wu Fengguang 23.0 Wei Jihui 18.5 Cao Xueliang 14.7 Yu Chuan 10.2 Zhang Yu 10.1 Luan Shengde 8.9 Li Ping 8.6 Wang Yong 8.4 Wu Zhende 7.6 Lin Jiaxin 7.5 Cui Yili 7.5 Xu Xijian 5.9 Lu Weitao 5.6 Ren Wen 5.5 Zhang Dewan 5.5 Bai Jing 5.3 Zhang Yuhang 5.1 Du Kaitian 4.9 Liu Shaofei 4.9 Zhang Yale 3.5 Liu Yinsi 3.3 Li Yuanchao 3.0 Hu Xuejiao 2.8 Xiao Shenwei 2.2 Lu Kaiyi 1.7 Sun Yukui 1.1 Wang Chenglong 0.0 Tong Qunfeng 0.0 Shi Zhichao 0.0 Wang Shuai 0.0 Cui Xucui 0.0 Zhou Shengrui

1 1

git count
by Wu Fengguang 06 Nov '20

06 Nov '20

Zhende is our code star, thanks Zhende! wfg@crystal /c/todo% bin/git-count 9 Wu Zhende 7 Wang Chenglong 5 Cao Xueliang 5 Xu Xijian 5 Li Ping 4 Liu Yinsi 4 Zhang Yale 4 Yu Chuan 3 Bai Jing 3 Hu Xuejiao 3 Xiao Shenwei 3 Wang Yong 2 Wei Jihui 2 Zhang Yu 2 Lu Kaiyi 1 Liu Shaofei 1 Wu Fengguang 1 Cui Yili 0 Tong Qunfeng 0 Du Kaitian 0 Lu Weitao 0 Sun Yukui 0 Shi Zhichao 0 Li Yuanchao 0 Luan Shengde 0 Ren Wen 0 Zhang Yuhang 0 Lin Jiaxin 0 Zhang Dewan 0 Zhou Shengrui

1 1

review star
by Wu Fengguang 06 Nov '20

06 Nov '20

Xueliang is our review star, thanks Xueliang! wfg@crystal /c/todo% bin/review-star Review email records in the last 7 days total review paragraph point people 141 85 185 44 Wu Fengguang 48 20 24 14 Cao Xueliang 22 15 21 11 Ren Wen 41 17 23 11 Wu Zhende 66 30 32 9 Wei Jihui 45 17 27 8 Xu Xijian 23 13 18 7 Liu Shaofei 55 12 3 7 Lu Kaiyi 45 11 18 6 Xiao Shenwei 42 11 20 5 Li Yuanchao 12 8 8 5 Cui Yili 16 11 24 4 Du Kaitian 44 5 5 4 Zhang Yale 51 8 8 3 Li Ping 37 5 9 3 Wang Chenglong 31 7 24 3 Yu Chuan 24 12 11 3 Zhang Yu 45 10 21 3 Hu Xuejiao 16 9 17 3 Wang Yong 20 10 10 3 Lin Jiaxin 34 15 32 3 Zhang Yuhang 86 24 61 3 Luan Shengde 31 8 18 3 Liu Yinsi 21 6 2 2 Bai Jing 2 2 3 0 Zhang Dewan 11 11 7 0 Sun Yukui 58 2 2 0 Lu Weitao 1 1 2 0 Tong Qunfeng

1 0

[PATCH compass-ci 3/3] src/lib/web_backend.rb: add date range limit feature
by Zhang Yuhang 06 Nov '20

06 Nov '20

[why] The "start_time" field need limit by date. example: GET /get_jobs?upstream_repo=a&page_size=12&start_date=2020-11-03&end_date=2020-11-03 Signed-off-by: Zhang Yuhang <zhangyuhang25(a)huawei.com> --- container/web-backend/web-backend | 33 ++++++++++++++++++++++++++++++- src/lib/web_backend.rb | 13 ++++++++++++ 2 files changed, 45 insertions(+), 1 deletion(-) diff --git a/container/web-backend/web-backend b/container/web-backend/web-backend index fcc765f..96c2347 100755 --- a/container/web-backend/web-backend +++ b/container/web-backend/web-backend @@ -31,8 +31,39 @@ get '/compare' do compare(params) end -# GET /get_jobs?upstream_repo=AvxToNeon/AvxToNeon&page_size=12&page_num=3 +# GET /get_jobs?upstream_repo=a&page_size=12&start_date=2020-11-03&end_date=2020-11-03 # upstream_repo: +# - regex search +# > optional +# +# os: +# > optional +# +# os_version: +# > optional +# +# os_arch: +# > optional +# +# suite: +# > optional +# +# category: +# > optional +# +# testbox: +# > optional +# +# job_state: +# > optional +# +# id: +# > optional +# +# start_date: +# > optional +# +# end_date: # > optional # # page_size: diff --git a/src/lib/web_backend.rb b/src/lib/web_backend.rb index 55c5e4a..25b99ea 100644 --- a/src/lib/web_backend.rb +++ b/src/lib/web_backend.rb @@ -260,6 +260,17 @@ def get_jobs_result(result) jobs end +def get_job_query_range(condition_fields) + range = { start_time: {} } + start_date = condition_fields[:start_date] + end_date = condition_fields[:end_date] + + range[:start_time][:gte] = "#{start_date} 00:00:00" if start_date + range[:start_time][:lte] = "#{end_date} 23:59:59" if end_date + + { range: range } +end + def search_job(condition_fields, page_size, page_num) must = [] FIELDS.each do |field| @@ -272,6 +283,8 @@ def search_job(condition_fields, page_size, page_num) { term: { field => value } } end end + range = get_job_query_range(condition_fields) + must << range if range[:range][:start_time] result, total = es_search(must, page_size, page_num * page_size) return get_jobs_result(result), total end -- 2.23.0

1 0

[PATCH compass-ci 2/3] src/lib/web_backend.rb: "/compare_candidates" tbox_group regex error
by Zhang Yuhang 06 Nov '20

06 Nov '20

[error info] 1. /\d+$/ will be matched, such as "xxx123". 2. `index = "xxx123".index('--') || "xxx123".rindex('-')` - index equal nil. 3. `r = r[0, nil]` - raise a TypeError. Signed-off-by: Zhang Yuhang <zhangyuhang25(a)huawei.com> --- src/lib/web_backend.rb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/lib/web_backend.rb b/src/lib/web_backend.rb index c3f6bef..55c5e4a 100644 --- a/src/lib/web_backend.rb +++ b/src/lib/web_backend.rb @@ -47,7 +47,7 @@ end def filter_tbox_group(es_result) result = Set.new es_result.each do |r| - if r =~ /(^.+--.+$)|(^vm-.*-\d\w*-([a-zA-Z]+)|(\d+)$)/ + if r =~ /(^.+--.+$)|(^vm-.*-\d\w*-(([a-zA-Z]+)|(\d+))$)/ index = r.index('--') || r.rindex('-') r = r[0, index] end -- 2.23.0

1 0

[PATCH compass-ci 1/3] sbin/es-repo-mapping.sh: create script that generates "repo" mapping
by Zhang Yuhang 06 Nov '20

06 Nov '20

[why] We need a script to create "repo" mapping in es. Signed-off-by: Zhang Yuhang <zhangyuhang25(a)huawei.com> --- sbin/es-repo-mapping.sh | 47 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100755 sbin/es-repo-mapping.sh diff --git a/sbin/es-repo-mapping.sh b/sbin/es-repo-mapping.sh new file mode 100755 index 0000000..4605051 --- /dev/null +++ b/sbin/es-repo-mapping.sh @@ -0,0 +1,47 @@ +#!/bin/sh +# SPDX-License-Identifier: MulanPSL-2.0+ +# Copyright (c) 2020 Huawei Technologies Co., Ltd. All rights reserved. + +# Check if "repo" index already exists. +status_code=$(curl -sIL -w "%{http_code}\n" -o /dev/null http://localhost:9200/repo) +[ $status_code -eq 200 ] && echo '"repo" index already exists.' && exit + +# Create "repo" index. +echo 'Start to create "repo" index.' +curl -H 'Content-Type: Application/json' -XPUT 'http://localhost:9200/repo' -d ' +{ + "mappings": { + "_doc": { + "properties": { + "git_repo": { + "type": "keyword" + }, + "pkgbuild_repo": { + "type": "keyword" + }, + "url": { + "type": "keyword" + }, + "fetch_time": { + "type": "keyword" + }, + "new_refs_time": { + "type": "keyword" + }, + "offset_fetch": { + "type": "long" + }, + "offset_new_refs": { + "type": "long" + }, + "priority": { + "type": "long" + }, + "queued": { + "type": "boolean" + } + } + } + } +}' +[ $? -ne 0 ] && echo 'Failed to create "repo" index.' -- 2.23.0

1 0

[PATCH v2 compass-ci] container: fix failed to build archlinux images in x86_64 machine
by Liu Yinsi 06 Nov '20

06 Nov '20

[why] when build archlinux images in x86_64 machine error: error: failed retrieving file 'core.db' from mirrors.tuna.tsinghua.edu.cn : The requested URL returned error:404 error: failed retrieving file 'core.db' from mirrors.163.com : The requested URL returned error: 404 error: failed retrieving file 'core.db' from mirror.archlinuxarm.org : The requested URL returned error: 404 error: failed to update core (failed to retrieve some files) error: failed retrieving file 'extra.db' from mirrors.tuna.tsinghua.edu.cn : The requested URL returned error:404 error: failed retrieving file 'extra.db' from mirrors.163.com : The requested URL returned error: 404 error: failed retrieving file 'extra.db' from mirror.archlinuxarm.org : Resolving timed out after 10000 milliseconds error: failed to update extra (download library error) error: failed retrieving file 'community.db' from mirrors.tuna.tsinghua.edu.cn : The requested URL returned error: 404 error: failed retrieving file 'community.db' from mirrors.163.com : The requested URL returned error: 404 error: failed retrieving file 'community.db' from mirror.archlinuxarm.org : The requested URL returned error:404 error: failed to update community (failed to retrieve some files) error: failed to synchronize all databases The command '/bin/sh -c pacman --needed --noprogressbar --noconfirm -Syu && pacman --needed --noprogressbar --noconfirm -S bash zsh git openssh rsync make gcc tzdata sudo coreutils util-linux vim gawk' returned a non-zero code: 1 because archlinux mirror not support x86_64 machine. [how] root/etc/pacman.d/mirrorlist => root/aarch64/etc/pacman.d/mirrorlist root/x86_64/etc/pacman.d/mirrorlist use ARCH=$(arch) to choose mirrorlist according to different system architecture. Signed-off-by: Liu Yinsi <liuyinsi(a)163.com> --- container/archlinux/Dockerfile | 6 +++++- container/archlinux/build | 2 +- .../archlinux/root/{ => aarch64}/etc/pacman.d/mirrorlist | 0 container/archlinux/root/x86_64/etc/pacman.d/mirrorlist | 1 + 4 files changed, 7 insertions(+), 2 deletions(-) rename container/archlinux/root/{ => aarch64}/etc/pacman.d/mirrorlist (100%) create mode 100644 container/archlinux/root/x86_64/etc/pacman.d/mirrorlist diff --git a/container/archlinux/Dockerfile b/container/archlinux/Dockerfile index c0f05d3..1f80ae0 100644 --- a/container/archlinux/Dockerfile +++ b/container/archlinux/Dockerfile @@ -5,7 +5,11 @@ FROM lopsided/archlinux MAINTAINER Wu Fenguang <wfg(a)mail.ustc.edu.cn> -COPY root / +ARG ARCH + +COPY root/$ARCH / + RUN chmod 755 /etc + RUN pacman --needed --noprogressbar --noconfirm -Syu && \ pacman --needed --noprogressbar --noconfirm -S bash zsh git openssh rsync make gcc tzdata sudo coreutils util-linux vim gawk diff --git a/container/archlinux/build b/container/archlinux/build index 81feda2..9749489 100755 --- a/container/archlinux/build +++ b/container/archlinux/build @@ -2,4 +2,4 @@ # SPDX-License-Identifier: MulanPSL-2.0+ # Copyright (c) 2020 Huawei Technologies Co., Ltd. All rights reserved. -docker build -t archlinux:testbed . +docker build --build-arg ARCH=$(arch) -t archlinux:testbed . diff --git a/container/archlinux/root/etc/pacman.d/mirrorlist b/container/archlinux/root/aarch64/etc/pacman.d/mirrorlist similarity index 100% rename from container/archlinux/root/etc/pacman.d/mirrorlist rename to container/archlinux/root/aarch64/etc/pacman.d/mirrorlist diff --git a/container/archlinux/root/x86_64/etc/pacman.d/mirrorlist b/container/archlinux/root/x86_64/etc/pacman.d/mirrorlist new file mode 100644 index 0000000..556fac8 --- /dev/null +++ b/container/archlinux/root/x86_64/etc/pacman.d/mirrorlist @@ -0,0 +1 @@ +Server = http://mirrors.tuna.tsinghua.edu.cn/archlinux/$repo/os/$arch -- 2.23.0

1 0

[PATCH compass-ci] container: fix failed to build archlinux images in x86_64 machine
by Liu Yinsi 06 Nov '20

06 Nov '20

[why] when build archlinux images in x86_64 machine error: error: failed retrieving file 'core.db' from mirrors.tuna.tsinghua.edu.cn : The requested URL returned error:404 error: failed retrieving file 'core.db' from mirrors.163.com : The requested URL returned error: 404 error: failed retrieving file 'core.db' from mirror.archlinuxarm.org : The requested URL returned error: 404 error: failed to update core (failed to retrieve some files) error: failed retrieving file 'extra.db' from mirrors.tuna.tsinghua.edu.cn : The requested URL returned error:404 error: failed retrieving file 'extra.db' from mirrors.163.com : The requested URL returned error: 404 error: failed retrieving file 'extra.db' from mirror.archlinuxarm.org : Resolving timed out after 10000 milliseconds error: failed to update extra (download library error) error: failed retrieving file 'community.db' from mirrors.tuna.tsinghua.edu.cn : The requested URL returned error: 404 error: failed retrieving file 'community.db' from mirrors.163.com : The requested URL returned error: 404 error: failed retrieving file 'community.db' from mirror.archlinuxarm.org : The requested URL returned error:404 error: failed to update community (failed to retrieve some files) error: failed to synchronize all databases The command '/bin/sh -c pacman --needed --noprogressbar --noconfirm -Syu && pacman --needed --noprogressbar --noconfirm -S bash zsh git openssh rsync make gcc tzdata sudo coreutils util-linux vim gawk' returned a non-zero code: 1 becaue archlinux mirror not support x86_64 machine. [how] root/etc/pacman.d/mirrorlist => root/aarch64/etc/pacman.d/mirrorlist root/x86_64/etc/pacman.d/mirrorlist use arch=$(arch) to choose mirrorlist according to different system architecture. Signed-off-by: Liu Yinsi <liuyinsi(a)163.com> --- container/archlinux/Dockerfile | 6 +++++- container/archlinux/build | 2 +- .../archlinux/root/{ => aarch64}/etc/pacman.d/mirrorlist | 0 container/archlinux/root/x86_64/etc/pacman.d/mirrorlist | 1 + 4 files changed, 7 insertions(+), 2 deletions(-) rename container/archlinux/root/{ => aarch64}/etc/pacman.d/mirrorlist (100%) create mode 100644 container/archlinux/root/x86_64/etc/pacman.d/mirrorlist diff --git a/container/archlinux/Dockerfile b/container/archlinux/Dockerfile index c0f05d3..1f80ae0 100644 --- a/container/archlinux/Dockerfile +++ b/container/archlinux/Dockerfile @@ -5,7 +5,11 @@ FROM lopsided/archlinux MAINTAINER Wu Fenguang <wfg(a)mail.ustc.edu.cn> -COPY root / +ARG ARCH + +COPY root/$ARCH / + RUN chmod 755 /etc + RUN pacman --needed --noprogressbar --noconfirm -Syu && \ pacman --needed --noprogressbar --noconfirm -S bash zsh git openssh rsync make gcc tzdata sudo coreutils util-linux vim gawk diff --git a/container/archlinux/build b/container/archlinux/build index 81feda2..a1eced4 100755 --- a/container/archlinux/build +++ b/container/archlinux/build @@ -2,4 +2,4 @@ # SPDX-License-Identifier: MulanPSL-2.0+ # Copyright (c) 2020 Huawei Technologies Co., Ltd. All rights reserved. -docker build -t archlinux:testbed . +docker build --build-arg arch=$(arch) -t archlinux:testbed . diff --git a/container/archlinux/root/etc/pacman.d/mirrorlist b/container/archlinux/root/aarch64/etc/pacman.d/mirrorlist similarity index 100% rename from container/archlinux/root/etc/pacman.d/mirrorlist rename to container/archlinux/root/aarch64/etc/pacman.d/mirrorlist diff --git a/container/archlinux/root/x86_64/etc/pacman.d/mirrorlist b/container/archlinux/root/x86_64/etc/pacman.d/mirrorlist new file mode 100644 index 0000000..556fac8 --- /dev/null +++ b/container/archlinux/root/x86_64/etc/pacman.d/mirrorlist @@ -0,0 +1 @@ +Server = http://mirrors.tuna.tsinghua.edu.cn/archlinux/$repo/os/$arch -- 2.23.0

3 4

[PATCH v4 compass-ci] multi-qemu: refactor code and add queues parameter
by Xiao Shenwei 06 Nov '20

06 Nov '20

Usage: multi-qemu -n -c -q -n, --name HOSTNAME_PREFIX format: $tbox_group.$HOSTNAME -c, --count count how many VM do you need -q, --queues queues separated by "," -h, --help show this message example: ./multi-qemu -n vm-2p8g.taishan200-2280-2s48p-256g--a1 \ -c 20 \ -q vm-2p8g.taishan200-2280-2s48p-256g--a1,vm-2p8g.aarch64 Signed-off-by: Xiao Shenwei <xiaoshenwei96(a)163.com> --- providers/multi-qemu | 96 +++++++++++++++++++++++++++++++++----------- 1 file changed, 72 insertions(+), 24 deletions(-) diff --git a/providers/multi-qemu b/providers/multi-qemu index 23e0451..c729c8e 100755 --- a/providers/multi-qemu +++ b/providers/multi-qemu @@ -4,46 +4,94 @@ # frozen_string_literal: true require 'fileutils' +require 'optparse' -PWD = Dir.pwd +opt = {} +options = OptionParser.new do |opts| + opts.banner = 'Usage: multi-qemu -n -c -q' + + opts.separator '' + opts.on('-n HOSTNAME_PREFIX', '--name HOSTNAME_PREFIX', 'format: $tbox_group.$HOSTNAME') do |name| + opt['hostname_prefix'] = name + end + + opts.on('-c count', '--count count', 'how many VM do you need') do |num| + opt['nr_vm'] = num + end + + opts.on('-q queues', '--queues queues', 'separated by ","') do |queues| + opt['queues'] = queues + end + + opts.on_tail('-h', '--help', 'show this message') do + puts opts + exit + end +end + +if ARGV.size.zero? + puts options + exit 1 +end + +options.parse!(ARGV) # Run multiple QEMU in parallel -HOSTNAME = ARGV[0] || "vm-2p8g--#{ENV['USER']}" -NR_VM = ARGV[1] || 1 +PWD = Dir.pwd +HOSTNAME = opt['hostname_prefix'] || "vm-2p8g.#{ENV['HOSTNAME']}" +NR_VM = opt['nr_vm'] || 1 +QUEUES = opt['queues'] || "#{ENV['HOSTNAME']}.#{RUBY_PLATFORM.split('-')[0]}" +LOG_DIR = '/srv/cci/serial/logs' -def run(seqno) - loop do - start_time = Time.new - hostname = "#{HOSTNAME}-#{seqno}" - log_file = "/srv/cci/serial/logs/#{hostname}" +def main(hostname) + start_time = record_runtime_log(hostname) + start_qemu(hostname) + record_runtime_log(hostname, start_time: start_time, is_start: false) +end +def record_runtime_log(hostname, start_time: Time.new, is_start: true) + log_file = "#{LOG_DIR}/#{hostname}" + if is_start File.open(log_file, 'w') do |f| # fluentd refresh time is 1s # let fluentd to monitor this file first sleep(2) f.puts "\n#{start_time.strftime('%Y-%m-%d %H:%M:%S')} starting QEMU" end + return start_time + end - pwd_hostname = File.join(PWD, hostname) - FileUtils.mkdir_p(pwd_hostname) unless File.exist?(pwd_hostname) - FileUtils.cd(pwd_hostname) - system( - { 'hostname' => hostname }, - ENV['CCI_SRC'] + '/providers/qemu.sh' - ) - - duration = ((Time.new - start_time) / 60).round(2) - File.open(log_file, 'a') do |f| - f.puts "\nTotal QEMU duration: #{duration} minutes" - end + duration = ((Time.new - start_time) / 60).round(2) + File.open(log_file, 'a') do |f| + f.puts "\nTotal QEMU duration: #{duration} minutes" + end +end + +def start_qemu(hostname) + pwd_hostname = File.join(PWD, hostname) + FileUtils.mkdir_p(pwd_hostname) unless File.exist?(pwd_hostname) + FileUtils.cd(pwd_hostname) + system( + { 'hostname' => hostname, 'queues' => QUEUES }, + ENV['CCI_SRC'] + '/providers/qemu.sh' + ) +end - # sleep 5s is for fluentd to collect it's log - sleep(5) +def loop_main(hostname) + loop do + begin + main(hostname) + rescue StandardError => e + puts e.backtrace + # if an exception occurs, request the next time after 30 seconds + sleep 25 + ensure + sleep 5 + end end end def save_pid(arr) - FileUtils.rm('pid') if File.exist?('pid') f = File.new('pid', 'a') arr.each do |i| f.puts(i) @@ -55,7 +103,7 @@ def multiqemu pids = [] NR_VM.to_i.times do |i| pid = Process.fork do - run i + loop_main("#{HOSTNAME}-#{i}") end pids << pid end -- 2.23.0

1 0

Re: [PATCH v3 lkp-tests 1/2] sbin/makepkg: support applying patch for PKGBUILD
by Ren Wen 06 Nov '20

06 Nov '20

>+ if ! source "$file"; then Builtin `source` returns the status of the last command executed in FILENAME; Is this what you want? Thanks, RenWen >+ error "$(gettext "Failed to source %s")" "$1" >+ exit 1 >+ fi >+ done > shopt -s extglob > } > >@@ -1626,7 +1630,6 @@ merge_arch_attrs() { > > source_buildfile() { > source_safe "$@" >- > if (( !SOURCEONLY )); then > merge_arch_attrs > fi >@@ -3661,6 +3664,7 @@ SRCEXT=${_SRCEXT:-$SRCEXT} > GPGKEY=${_GPGKEY:-$GPGKEY} > PACKAGER=${_PACKAGER:-$PACKAGER} > CARCH=${_CARCH:-$CARCH} >+PKGBUILD_TAG=$PKGBUILD_TAG > > if (( INFAKEROOT )); then > if [[ -z $FAKEROOTKEY ]]; then >@@ -3691,7 +3695,7 @@ else > if [[ ${BUILDFILE:0:1} != "/" ]]; then > BUILDFILE="$startdir/$BUILDFILE" > fi >- source_buildfile "$BUILDFILE" >+ source_buildfile "$BUILDFILE" "$BUILDFILE$PKGBUILD_TAG" > fi > > # set defaults if they weren't specified in buildfile >-- >2.23.0 >

1 0

[PATCH v3 lkp-tests 1/2] sbin/makepkg: support applying patch for PKGBUILD
by Lin Jiaxin 06 Nov '20

06 Nov '20

[Why] Support more version's PKGBUILD. [How] Replace the previous content with two source command. example: PKGBUILD_TAG=-1.1 BUILDFILE -> PKGBUILD BUILDFILE$PKGBUILD_TAG -> PKGBUILD-1.1 PKGBUILD-1.1 contains only the changed part. % cat PKGBUILD-1.1 pkgver=1.1 pkgrel=2 build() { make install DESTDIR="${pkgdir}/lkp/benchmarks/${pkgname}" } Signed-off-by: Lin Jiaxin <ljx.joe(a)qq.com> --- sbin/makepkg | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/sbin/makepkg b/sbin/makepkg index 25773621..dc8471b9 100755 --- a/sbin/makepkg +++ b/sbin/makepkg @@ -888,7 +888,7 @@ update_pkgver() { exit 1 fi sed --follow-symlinks -i "s:^pkgrel=[^ ]*:pkgrel=1:" "$BUILDFILE" - source_safe "$BUILDFILE" + source_safe "$BUILDFILE" "$BUILDFILE$PKGBUILD_TAG" local fullver=$(get_full_version) msg "$(gettext "Updated version: %s")" "$pkgbase $fullver" else @@ -1604,10 +1604,14 @@ cd_safe() { source_safe() { shopt -u extglob - if ! source "$@"; then - error "$(gettext "Failed to source %s")" "$1" - exit 1 - fi + local file + for file in "$@" + do + if ! source "$file"; then + error "$(gettext "Failed to source %s")" "$1" + exit 1 + fi + done shopt -s extglob } @@ -1626,7 +1630,6 @@ merge_arch_attrs() { source_buildfile() { source_safe "$@" - if (( !SOURCEONLY )); then merge_arch_attrs fi @@ -3661,6 +3664,7 @@ SRCEXT=${_SRCEXT:-$SRCEXT} GPGKEY=${_GPGKEY:-$GPGKEY} PACKAGER=${_PACKAGER:-$PACKAGER} CARCH=${_CARCH:-$CARCH} +PKGBUILD_TAG=$PKGBUILD_TAG if (( INFAKEROOT )); then if [[ -z $FAKEROOTKEY ]]; then @@ -3691,7 +3695,7 @@ else if [[ ${BUILDFILE:0:1} != "/" ]]; then BUILDFILE="$startdir/$BUILDFILE" fi - source_buildfile "$BUILDFILE" + source_buildfile "$BUILDFILE" "$BUILDFILE$PKGBUILD_TAG" fi # set defaults if they weren't specified in buildfile -- 2.23.0

3 5

[PATCH v3 compass-ci] multi-qemu: refactor code and add queues parameter
by Xiao Shenwei 06 Nov '20

06 Nov '20

Usage: multi-qemu -n -c -q -n, --name HOSTNAME_PREFIX format: $tbox_group.$HOSTNAME -c, --count count how many VM do you need -q, --queues queues separated by "," -h, --help show this message example: ./multi-qemu -n vm-2p8g.taishan200-2280-2s48p-256g--a1 \ -c 20 \ -q vm-2p8g.taishan200-2280-2s48p-256g--a1,vm-2p8g.aarch64 Signed-off-by: Xiao Shenwei <xiaoshenwei96(a)163.com> --- providers/multi-qemu | 95 +++++++++++++++++++++++++++++++++----------- 1 file changed, 71 insertions(+), 24 deletions(-) diff --git a/providers/multi-qemu b/providers/multi-qemu index 23e0451..bb85d41 100755 --- a/providers/multi-qemu +++ b/providers/multi-qemu @@ -4,46 +4,93 @@ # frozen_string_literal: true require 'fileutils' +require 'optparse' -PWD = Dir.pwd +opt = {} +options = OptionParser.new do |opts| + opts.banner = 'Usage: multi-qemu -n -c -q' + + opts.separator '' + opts.on('-n HOSTNAME_PREFIX', '--name HOSTNAME_PREFIX', 'format: $tbox_group.$HOSTNAME') do |name| + opt['hostname_prefix'] = name + end + + opts.on('-c count', '--count count', 'how many VM do you need') do |num| + opt['nr_vm'] = num + end + + opts.on('-q queues', '--queues queues', 'separated by ","') do |queues| + opt['queues'] = queues + end + + opts.on_tail('-h', '--help', 'show this message') do + puts opts + exit + end +end + +if ARGV.size.zero? + puts options + exit 1 +end + +options.parse!(ARGV) # Run multiple QEMU in parallel -HOSTNAME = ARGV[0] || "vm-2p8g--#{ENV['USER']}" -NR_VM = ARGV[1] || 1 +PWD = Dir.pwd +HOSTNAME = opt['hostname_prefix'] || "vm-2p8g.#{ENV['HOSTNAME']}" +NR_VM = opt['nr_vm'] || 1 +QUEUES = opt['queues'] || "#{ENV['HOSTNAME']}.#{RUBY_PLATFORM.split('-')[0]}" +LOG_DIR = '/srv/cci/serial/logs' -def run(seqno) - loop do - start_time = Time.new - hostname = "#{HOSTNAME}-#{seqno}" - log_file = "/srv/cci/serial/logs/#{hostname}" +def main(hostname) + start_time = record_runtime_log(hostname) + start_qemu(hostname) + record_runtime_log(hostname, start_time: start_time, is_start: false) +end +def record_runtime_log(hostname, start_time: Time.new, is_start: true) + log_file = "#{LOG_DIR}/#{hostname}" + if is_start File.open(log_file, 'w') do |f| # fluentd refresh time is 1s # let fluentd to monitor this file first sleep(2) f.puts "\n#{start_time.strftime('%Y-%m-%d %H:%M:%S')} starting QEMU" end + return start_time + end + duration = ((Time.new - start_time) / 60).round(2) + File.open(log_file, 'a') do |f| + f.puts "\nTotal QEMU duration: #{duration} minutes" + end +end - pwd_hostname = File.join(PWD, hostname) - FileUtils.mkdir_p(pwd_hostname) unless File.exist?(pwd_hostname) - FileUtils.cd(pwd_hostname) - system( - { 'hostname' => hostname }, - ENV['CCI_SRC'] + '/providers/qemu.sh' - ) - - duration = ((Time.new - start_time) / 60).round(2) - File.open(log_file, 'a') do |f| - f.puts "\nTotal QEMU duration: #{duration} minutes" - end +def start_qemu(hostname) + pwd_hostname = File.join(PWD, hostname) + FileUtils.mkdir_p(pwd_hostname) unless File.exist?(pwd_hostname) + FileUtils.cd(pwd_hostname) + system( + { 'hostname' => hostname, 'queues' => QUEUES }, + ENV['CCI_SRC'] + '/providers/qemu.sh' + ) +end - # sleep 5s is for fluentd to collect it's log - sleep(5) +def loop_main(hostname) + loop do + begin + main(hostname) + rescue StandardError => e + puts e.backtrace + # if an exception occurs, request the next time after 30 seconds + sleep 25 + ensure + sleep 5 + end end end def save_pid(arr) - FileUtils.rm('pid') if File.exist?('pid') f = File.new('pid', 'a') arr.each do |i| f.puts(i) @@ -55,7 +102,7 @@ def multiqemu pids = [] NR_VM.to_i.times do |i| pid = Process.fork do - run i + loop_main("#{HOSTNAME}-#{i}") end pids << pid end -- 2.23.0

2 2

[PATCH lkp-tests 2/3] iso2rootfs: add step: config dns resolver of rootfs
by Yu Chuan 06 Nov '20

06 Nov '20

[Addition] Use config_rootfs as a function to maintain scalability. Signed-off-by: Yu Chuan <13186087857(a)163.com> --- tests/iso2rootfs | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/tests/iso2rootfs b/tests/iso2rootfs index f864188a8b02..bf842108ae02 100755 --- a/tests/iso2rootfs +++ b/tests/iso2rootfs @@ -339,6 +339,22 @@ run_qcow2rootfs() ./run "${qcow2_path}" "${ROOTFS_DES_DIR}" } + +############ config rootfs ############ +config_dns_resolver() +{ + local resolv_conf_path="${ROOTFS_DES_DIR}/etc/resolv.conf" + cat <<-EOF > "${resolv_conf_path}" + nameserver 114.114.114.114 + nameserver 8.8.8.8 + EOF +} + +config_rootfs() +{ + config_dns_resolver +} + ############ test rootfs ############ get_qemu_efi_fd() { @@ -499,6 +515,8 @@ main() config_qcow2rootfs run_qcow2rootfs + config_rootfs + test_rootfs [ -z ${test_yaml} ] || submit_test_job_yaml -- 2.23.0

2 2

[PATCH v2 compass-ci] area: refactor multi-qemu to support queues parameter
by Xiao Shenwei 06 Nov '20

06 Nov '20

Usage: multi-qemu -n -c -q -n, --name HOSTNAME_PREFIX format: $tbox_group.$HOSTNAME -c, --count count how many VM do you need -q, --queues queues separated by "," -h, --help show this message example: ./multi-qemu -n vm-2p8g.taishan200-2280-2s48p-256g--a1 \ -c 20 \ -q vm-2p8g.taishan200-2280-2s48p-256g--a1,vm-2p8g.aarch64 Signed-off-by: Xiao Shenwei <xiaoshenwei96(a)163.com> --- providers/multi-qemu | 95 +++++++++++++++++++++++++++++++++----------- 1 file changed, 71 insertions(+), 24 deletions(-) diff --git a/providers/multi-qemu b/providers/multi-qemu index 23e0451..045160f 100755 --- a/providers/multi-qemu +++ b/providers/multi-qemu @@ -4,46 +4,93 @@ # frozen_string_literal: true require 'fileutils' +require 'optparse' -PWD = Dir.pwd +opt = {} +options = OptionParser.new do |opts| + opts.banner = 'Usage: multi-qemu -n -c -q' + + opts.separator '' + opts.on('-n HOSTNAME_PREFIX', '--name HOSTNAME_PREFIX', 'format: $tbox_group.$HOSTNAME') do |name| + opt['hostname_prefix'] = name + end + + opts.on('-c count', '--count count', 'how many VM do you need') do |num| + opt['nr_vm'] = num + end + + opts.on('-q queues', '--queues queues', 'separated by ","') do |queues| + opt['queues'] = queues + end + + opts.on_tail('-h', '--help', 'show this message') do + puts opts + exit + end +end + +if ARGV.size.zero? + puts options + exit 1 +end + +options.parse!(ARGV) # Run multiple QEMU in parallel -HOSTNAME = ARGV[0] || "vm-2p8g--#{ENV['USER']}" -NR_VM = ARGV[1] || 1 +PWD = Dir.pwd +HOSTNAME = opt['hostname_prefix'] || "vm-2p8g.#{ENV['HOSTNAME']}" +NR_VM = opt['nr_vm'] || 1 +QUEUES = opt['queues'] || "#{ENV['HOSTNAME']}.#{RUBY_PLATFORM.split('-')[0]}" +LOG_DIR = '/srv/cci/serial/logs' -def run(seqno) - loop do - start_time = Time.new - hostname = "#{HOSTNAME}-#{seqno}" - log_file = "/srv/cci/serial/logs/#{hostname}" +def main(hostname) + start_time = record_runtime_log(hostname) + start_qemu(hostname) + record_runtime_log(hostname, start_time: start_time, is_start: false) +end +def record_runtime_log(hostname, start_time: Time.new, is_start: true) + log_file = "#{LOG_DIR}/#{hostname}" + if is_start File.open(log_file, 'w') do |f| # fluentd refresh time is 1s # let fluentd to monitor this file first sleep(2) f.puts "\n#{start_time.strftime('%Y-%m-%d %H:%M:%S')} starting QEMU" end + return start_time + end + duration = ((Time.new - start_time) / 60).round(2) + File.open(log_file, 'a') do |f| + f.puts "\nTotal QEMU duration: #{duration} minutes" + end +end - pwd_hostname = File.join(PWD, hostname) - FileUtils.mkdir_p(pwd_hostname) unless File.exist?(pwd_hostname) - FileUtils.cd(pwd_hostname) - system( - { 'hostname' => hostname }, - ENV['CCI_SRC'] + '/providers/qemu.sh' - ) - - duration = ((Time.new - start_time) / 60).round(2) - File.open(log_file, 'a') do |f| - f.puts "\nTotal QEMU duration: #{duration} minutes" - end +def start_qemu(hostname) + pwd_hostname = File.join(PWD, hostname) + FileUtils.mkdir_p(pwd_hostname) unless File.exist?(pwd_hostname) + FileUtils.cd(pwd_hostname) + system( + { 'hostname' => hostname, 'queues' => QUEUES }, + ENV['CCI_SRC'] + '/providers/qemu.sh' + ) +end - # sleep 5s is for fluentd to collect it's log - sleep(5) +def loop_main(hostname) + loop do + begin + main(hostname) + rescue StandardError => e + puts e.backtrace + # if an exception occurs, request the next time after 30 seconds + sleep 25 + ensure + sleep 5 + end end end def save_pid(arr) - FileUtils.rm('pid') if File.exist?('pid') f = File.new('pid', 'a') arr.each do |i| f.puts(i) @@ -55,7 +102,7 @@ def multiqemu pids = [] NR_VM.to_i.times do |i| pid = Process.fork do - run i + loop_main("#{HOSTNAME}-#{i}") end pids << pid end -- 2.23.0

4 8

[PATCH v5 lkp-tests] tests: add hackbench-git test script
by Zhang Yale 06 Nov '20

06 Nov '20

[Why] hackbench-git is an old version required by the customer. The hackbench-git usage: hackbench [-pipe] <num groups> [process|thread] [loops] So need to add new test script for hackbench-git. Signed-off-by: Zhang Yale <ylzhangah(a)qq.com> --- tests/hackbench-git | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100755 tests/hackbench-git diff --git a/tests/hackbench-git b/tests/hackbench-git new file mode 100755 index 00000000..f902fb0e --- /dev/null +++ b/tests/hackbench-git @@ -0,0 +1,35 @@ +#!/bin/sh +# - runtime +# - nr_threads +# - mode +# - ipc +# - iterations +# - loops + +## Hackbench-git is an old version, It is both a benchmark and a stress test for the Linux kernel scheduler. +## It's main job is to create a specified number of schedulable entities pairs. +## (either threads or traditional processes) which communicate via either sockets or pipes and time how long +## it takes for each pair to send data back and forth. + +[ "$ipc" = 'pipe' ] && ipc_option='-pipe' + +[ -n "$runtime" ] || runtime=600 +[ -n "$iterations" ] || iterations=10 +[ -n "$loops" ] || loops=100 +[ -n "$nr_threads" ] || nr_threads=1 + +run_hackbench() +{ + # args: groups number, mode [process/thread], loops, ipc [pipe/socket] + hackbench_path=/lkp/benchmarks/hackbench-git/hackbench/hackbench + if [ ! -x /lkp/benchmarks/hackbench-git/hackbench/hackbench ]; then + echo "The hackbench executable file cannot be found." && exit 1 + fi + + echo "--------$ipc $mode num=$nr_threads--------" + for i in $(seq 1 $iterations); do + log_cmd $hackbench_path $ipc_option $nr_threads $mode $loops + done +} + +run_hackbench -- 2.23.0

3 4

[PATCH v6 compass-ci 3/3] assign-account: optimize answerback-email.rb
by Luan Shengde 06 Nov '20

06 Nov '20

1. disable use golbal variable apply_info [why] rubocop: Style/GlobalVars: Do not introduce global variables. [how] use local variables instead of global variables 2. fix OptionParser argument [why] when write this: opts.on('-e|--email email_address', 'appoint email address') will lead to could not identify the options ./answerback-email.rb --email xxx(a)163.com ./answerback-email.rb:72:in `<main>': invalid option: --email (OptionParser::InvalidOption) [how] write seprately like: opts.on('-e email_address', '--email email_address', 'appoint email address') 3. add transfer user info when execute apply account command [why] when applying account, the assign-account service need to write the my info to user's default config file ~/.config/compass-ci/defaults/account.yaml my_info: - my_email - my_name - my_uuid [how] transfer the user info along with the pub_key when sending apply account request Signed-off-by: Luan Shengde <shdluan(a)163.com> --- container/assign-account/answerback-email.rb | 87 +++++++++++--------- 1 file changed, 49 insertions(+), 38 deletions(-) diff --git a/container/assign-account/answerback-email.rb b/container/assign-account/answerback-email.rb index bb8e809..cc49903 100755 --- a/container/assign-account/answerback-email.rb +++ b/container/assign-account/answerback-email.rb @@ -12,58 +12,63 @@ require 'mail' require 'set' require 'optparse' require_relative '../defconfig' +require_relative '../../lib/es_client' names = Set.new %w[ JUMPER_HOST JUMPER_PORT - SEND_MAIL_HOST_INTERNET - SEND_MAIL_PORT_INTERNET + SEND_MAIL_HOST + SEND_MAIL_PORT ] defaults = relevant_defaults(names) JUMPER_HOST = defaults['JUMPER_HOST'] || 'api.compass-ci.openeuler.org' JUMPER_PORT = defaults['JUMPER_PORT'] || 29999 -SEND_MAIL_HOST = defaults['SEND_MAIL_HOST_INTERNET'] || 'localhost' -SEND_MAIL_PORT = defaults['SEND_MAIL_PORT_INTERNET'] || 11312 +SEND_MAIL_HOST = defaults['SEND_MAIL_HOST'] || 'localhost' +SEND_MAIL_PORT = defaults['SEND_MAIL_PORT'] || 49000 -$apply_info = { +my_info = { 'my_email' => nil, + 'my_name' => nil, + 'my_uuid' => %x(uuidgen).chomp, 'my_ssh_pubkey' => nil } -def init_info(email_file) +def init_info(email_file, my_info) mail_content = Mail.read(email_file) - - $apply_info['my_email'] = mail_content.from[0] - $apply_info['my_ssh_pubkey'] = if mail_content.part[1].filename == 'id_rsa.pub' - mail_content.part[1].body.decoded.gsub(/\r|\n/, '') - end - - $apply_info + my_info['my_email'] = mail_content.from[0] + my_info['my_name'] = mail_content.From.unparsed_value.gsub(/ <[^<>]*>/, '') + my_info['my_ssh_pubkey'] = if mail_content.part[1].filename == 'id_rsa.pub' + mail_content.part[1].body.decoded + end end options = OptionParser.new do |opts| - opts.banner = "Usage: answerback-mail.rb [--email email] [--ssh-pubkey pub_key_file] [--raw-email email_file]\n" + opts.banner = 'Usage: answerback-mail.rb [-e|--email email] ' + opts.banner += "[-s|--ssh-pubkey pub_key_file] [-f|--raw-email email_file]\n" opts.banner += " -e or -f is required\n" opts.banner += ' -s is optional when use -e' opts.separator '' opts.separator 'options:' - opts.on('-e|--email email_address', 'appoint email address') do |email_address| - $apply_info['my_email'] = email_address + opts.on('-e email_address', '--email email_address', 'appoint email address') do |email_address| + my_info['my_email'] = email_address + # when apply account with email address, will get no user name + my_info['my_name'] = '' end - opts.on('-s|--ssh-pubkey pub_key_file', 'ssh pub_key file, enable password-less login') do |pub_key_file| - $apply_info['my_ssh_pubkey'] = File.read(pub_key_file) + opts.on('-s pub_key_file', '--ssh-pubkey pub_key_file', \ + 'ssh pub_key file, enable password-less login') do |pub_key_file| + my_info['my_ssh_pubkey'] = File.read(pub_key_file) end - opts.on('-f|--raw-email email_file', 'email file') do |email_file| - init_info(email_file) + opts.on('-f email_file', '--raw-email email_file', 'email file') do |email_file| + init_info(email_file, my_info) end - opts.on_tail('-h|--help', 'show this message') do + opts.on_tail('-h', '--help', 'show this message') do puts opts exit end @@ -71,10 +76,10 @@ end options.parse!(ARGV) -def build_message(email, acct_infos) +def build_message(email, account_info) message = <<~EMAIL_MESSAGE To: #{email} - Subject: jumper account is ready + Subject: [compass-ci] jumper account is ready Dear user: @@ -82,10 +87,10 @@ def build_message(email, acct_infos) You can use the following command to login the jumper server: login command: - ssh -p #{acct_infos['jumper_port']} #{acct_infos['account']}@#{acct_infos['jumper_ip']} + ssh -p #{account_info['jumper_port']} #{account_info['my_login_name']}@#{account_info['jumper_host']} account password: - #{acct_infos['passwd']} + #{account_info['my_password']} regards compass-ci @@ -94,26 +99,32 @@ def build_message(email, acct_infos) return message end -def account_info(pub_key) - account_info_str = if pub_key.nil? - %x(curl -XGET '#{JUMPER_HOST}:#{JUMPER_PORT}/assign_account') - else - %x(curl -XGET '#{JUMPER_HOST}:#{JUMPER_PORT}/assign_account' -d "pub_key: #{pub_key}") - end +def apply_account(my_info) + account_info_str = %x(curl -XGET '#{JUMPER_HOST}:#{JUMPER_PORT}/assign_account' -d '#{my_info.to_json}') JSON.parse account_info_str end -def send_account +def send_account(my_info) message = "No email address specified\n" - message += "use -e email_address add a email address\n" + message += "use -e to add a email address\n" message += 'or use -f to add a email file' - raise message if $apply_info['my_email'].nil? - - acct_info = account_info($apply_info['my_ssh_pubkey']) + raise message if my_info['my_email'].nil? - message = build_message($apply_info['my_email'], acct_info) + account_info = apply_account(my_info) + # for manually assign account, there will be no my_commit_url + # but the key is required for es + my_info['my_commit_url'] = '' + my_info['my_login_name'] = account_info['my_login_name'] + my_info.delete 'my_ssh_pubkey' + store_account_info(my_info) + message = build_message(my_info['my_email'], account_info) %x(curl -XPOST '#{SEND_MAIL_HOST}:#{SEND_MAIL_PORT}/send_mail_text' -d "#{message}") end -send_account +def store_account_info(my_info) + es = ESClient.new(index: 'accounts') + es.put_source_by_id(my_info['my_email'], my_info) +end + +send_account(my_info) -- 2.23.0

1 0

[PATCH v6 compass-ci 2/3] get_account_info: add config default yaml file
by Luan Shengde 06 Nov '20

06 Nov '20

when assign account, config the default yaml for user [why] easier for user to config the default yaml file [how] write received my info to the default yaml file ~/.config/compass-ci/default/account.yaml include: - my_email - my_name - my_uuid Signed-off-by: Luan Shengde <shdluan(a)163.com> --- container/assign-account/get_account_info.rb | 73 ++++++++++++-------- 1 file changed, 44 insertions(+), 29 deletions(-) diff --git a/container/assign-account/get_account_info.rb b/container/assign-account/get_account_info.rb index 2f93d5b..87d2452 100755 --- a/container/assign-account/get_account_info.rb +++ b/container/assign-account/get_account_info.rb @@ -7,17 +7,17 @@ ACCOUNT_DIR dir layout: tree -├── assigned-users -│ ├── user1 -│ ├── user2 -│ ├── user3 -│ ├── ... -├── available-users -│ ├── user11 -│ ├── user12 -│ ├── user13 -│ ├── ... -└── jumper-info +|-- assigned-users +| |-- user1 +| |-- user2 +| |-- user3 +| |-- ... +|-- available-users +| |-- user11 +| |-- user12 +| |-- user13 +| |-- ... +|-- jumper-info assigned-users: store assigned user files available-users: store available user files @@ -44,6 +44,8 @@ the returned data for setup_jumper_account_info like: =end +require 'fileutils' + # get jumper and account info class AccountStorage ACCOUNT_DIR = '/opt/account_data/' @@ -93,35 +95,48 @@ class AccountStorage def setup_jumper_account_info account_info = read_account_info jumper_info = read_jumper_info - pub_key = @data['pub_key'] unless @data.nil? - - jumper_ip = jumper_info[0].chomp - jumper_port = jumper_info[1].chomp - account = account_info[0] - passwd = if pub_key.nil? - account_info[1] - else - 'Use pub_key to login' - end + pub_key = @data['my_ssh_pubkey'] unless @data['my_ssh_pubkey'].nil? + + login_name = account_info[0] + password = if pub_key.nil? + account_info[1] + else + 'Use pub_key to login' + end + jumper_account_info = { - 'account' => account, - 'passwd' => passwd, - 'jumper_ip' => jumper_ip, - 'jumper_port' => jumper_port + 'my_login_name' => login_name, + 'my_password' => password, + 'jumper_host' => jumper_info[0].chomp, + 'jumper_port' => jumper_info[1].chomp } - setup_authorized_key(account, pub_key) + setup_authorized_key(login_name, pub_key) unless pub_key.nil? + setup_default_yaml(login_name) + return jumper_account_info end - def setup_authorized_key(account, pub_key) - ssh_dir = File.join('/home/', account, '.ssh') + def setup_default_yaml(login_name) + default_yaml_dir = File.join('/home', login_name, '.config/compass-ci/defaults') + FileUtils.mkdir_p default_yaml_dir + + File.open("#{default_yaml_dir}/account.yaml", 'a') do |file| + file.puts "my_email: #{@data['my_email']}" + file.puts "my_name: #{@data['my_name']}" + file.puts "my_uuid: #{@data['my_uuid']}" + end + %x(chown -R #{login_name}:#{login_name} "/home/#{login_name}/.config") + end + + def setup_authorized_key(login_name, pub_key) + ssh_dir = File.join('/home/', login_name, '.ssh') Dir.mkdir ssh_dir, 0o700 Dir.chdir ssh_dir f = File.new('authorized_keys', 'w') f.puts pub_key f.close File.chmod 0o600, 'authorized_keys' - %x(chown -R #{account}:#{account} #{ssh_dir}) + %x(chown -R #{login_name}:#{login_name} #{ssh_dir}) end end -- 2.23.0

1 0

[PATCH lkp-tests 3/3] iso2rootfs: solve the problem of multiple vmlinuz failures during test
by Yu Chuan 06 Nov '20

06 Nov '20

[Why] We use compass-ci/container/qcow2rootfs to generate rootfs from qcow2, but compass-ci updated the code, qcow2rootfs create a vmlinuz soft link at {rootfs_dir}/boot. As a result, when getting var(kernel_path), the vmlinuz soft link is also included, and our var(kernel_path) gets two identical vmlinuz. Error msg: + sed -i 's|KERNEL|"{rootfs_dir}/boot/vmlinuz-4.19.90-2010.2.0.0046.oe1.aarch64 {rootfs_dir}/boot/vmlinuz-4.19.90-2010.2.0.0046.oe1.aarch64"|g' {i2r_src}/env/iso2rootfs/kvm.sh sed: -e expression #1, char 133: unterminated `s' command [How] 1. When filtering vmlinuz: Before: realpath {rootfs_dir}/boot/vmlinuz* | grep -v rescue After: realpath {rootfs_dir}/boot/vmlinuz-* | grep -v rescue 2. Add a judgement, if the kernel num of result rootfs is not equal to 1, exit. Signed-off-by: Yu Chuan <13186087857(a)163.com> --- tests/iso2rootfs | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/tests/iso2rootfs b/tests/iso2rootfs index bf842108ae02..2329715ef34b 100755 --- a/tests/iso2rootfs +++ b/tests/iso2rootfs @@ -371,8 +371,12 @@ test_rootfs() log_info "starting test rootfs ..." local test_script="${CGZ_PATH}/kvm.sh" - local kernel_path=$(realpath "${ROOTFS_DES_DIR}"/boot/vmlinuz*|grep -v rescue) + local kernel_path=$(realpath "${ROOTFS_DES_DIR}"/boot/vmlinuz-*|grep -v rescue) local initrd_lkp_path=$(realpath "${ROOTFS_DES_DIR}"/boot/initramfs.lkp*) + + local kernel_num=$(echo "$kernel_path" | wc -l) + [ "$kernel_num" == "1" ] || die "result rootfs have multiple vmlinuz, num: $kernel_num" + local root_path case ${rootfs_protocol} in "nfs") -- 2.23.0

1 0

[PATCH v3 lkp-tests 2/2] tests/cci-makepkg: add download PKGBUILD patch function
by Lin Jiaxin 06 Nov '20

06 Nov '20

[Why] Support more version's PKGBUILD. [How] Download the required file through remote-git Signed-off-by: Lin Jiaxin <ljx.joe(a)qq.com> --- tests/cci-makepkg | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/tests/cci-makepkg b/tests/cci-makepkg index 9551ebfe..1faa1e9f 100755 --- a/tests/cci-makepkg +++ b/tests/cci-makepkg @@ -37,6 +37,23 @@ cd $LKP_SRC/pkg/$benchmark || die "pkg is empty" mount -t cifs -o guest,vers=1.0,noacl,nouser_xattr //$LKP_SERVER$PKG_MNT $PKG_MNT || die "Failed to run mount" } +get_pkgfile() +{ + curl -sS -H 'Content-Type: Application/json' -XPOST "$LKP_SERVER"':8100/git_command' \ + -d '{"git_repo": "'$1'", "git_command": ["git-show", "HEAD:'$2'"]}' -o "$2" +} + +check_pkgfile() +{ + PKGBUILD_TAG="-$PKGBUILD_TAG" + PKGBUILD_TAG_FILE="PKGBUILD$PKGBUILD_TAG" + + get_pkgfile "pkg/$benchmark" "$PKGBUILD_TAG_FILE" + + [ -f "$PKGBUILD_TAG_FILE" ] || die "$PKGBUILD_TAG_FILE not exist" + [ -s "$PKGBUILD_TAG_FILE" ] || die "$PKGBUILD_TAG_FILE is empty" +} + get_pkg_info() { var=$1 @@ -69,6 +86,8 @@ update_shared_pkg() echo "update shared pkg link ${benchmark}.cgz -> ${bm_name}/${cgz_name}" } +[ -n "$PKGBUILD_TAG" ] && check_pkgfile + distro_install_depends lkp-dev [ $os = "centos" ] && -- 2.23.0

1 0

[PATCH v2 compass-ci] sched: simplify cluster state updating
by Ren Wen 06 Nov '20

06 Nov '20

There are three steps when updating cluster state: 1) get cluster state from redis. 2) update cluster state. 3) rewrite to redis. Before: write to redis one job info once. After: write to redis more than one job info once. It will save time when writing more than one job info once. Signed-off-by: Ren Wen <15991987063(a)163.com> --- src/lib/sched.cr | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/src/lib/sched.cr b/src/lib/sched.cr index a4b12b4..bff6090 100644 --- a/src/lib/sched.cr +++ b/src/lib/sched.cr @@ -58,11 +58,11 @@ class Sched return cluster_state end - # get -> modify -> set - def update_cluster_state(cluster_id, job_id, property, value) + # Update job info according to cluster id. + def update_cluster_state(cluster_id, job_id, job_info : Hash(String, String)) cluster_state = get_cluster_state(cluster_id) if cluster_state[job_id]? - cluster_state[job_id].merge!({property => value}) + cluster_state[job_id].merge!(job_info) @redis.hash_set("sched/cluster_state", cluster_id, cluster_state.to_json) end end @@ -86,9 +86,9 @@ class Sched case request_state when "abort", "finished", "failed" # update node state only - update_cluster_state(cluster_id, job_id, "state", states[request_state]) + update_cluster_state(cluster_id, job_id, {"state" => states[request_state]}) when "wait_ready" - update_cluster_state(cluster_id, job_id, "state", states[request_state]) + update_cluster_state(cluster_id, job_id, {"state" => states[request_state]}) @block_helper.block_until_finished(cluster_id) { cluster_state = sync_cluster_state(cluster_id, job_id, states[request_state]) cluster_state == "ready" || cluster_state == "abort" @@ -96,7 +96,7 @@ class Sched return cluster_state when "wait_finish" - update_cluster_state(cluster_id, job_id, "state", states[request_state]) + update_cluster_state(cluster_id, job_id, {"state" => states[request_state]}) while 1 sleep(10) cluster_state = sync_cluster_state(cluster_id, job_id, states[request_state]) @@ -110,10 +110,11 @@ class Sched direct_ips = env.params.query["direct_ips"] direct_macs = env.params.query["direct_macs"] - update_cluster_state(cluster_id, job_id, "roles", node_roles) - update_cluster_state(cluster_id, job_id, "ip", node_ip) - update_cluster_state(cluster_id, job_id, "direct_ips", direct_ips) - update_cluster_state(cluster_id, job_id, "direct_macs", direct_macs) + job_info = {"roles" => node_roles, + "ip" => node_ip, + "direct_ips" => direct_ips, + "direct_macs" => direct_macs} + update_cluster_state(cluster_id, job_id, job_info) when "roles_ip" role = "server" role_state = get_role_state(cluster_id, role) -- 2.23.0

3 4

2024

2023

2022

2021

2020

Compass-ci