From: Arınç ÜNAL arinc.unal@arinc9.com
stable inclusion from stable-v5.10.110 commit 59ec187d7c08e8739cf675b7445075fb4d338dd0 bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 6256e18686158fa49e019297f990f1c1817aabf1 ]
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the schematics of the device for more information.
LED fixes: - Change GPIO6 LED label from system to power as GPIO6 is connected to PLED. - Add default-on default-trigger to power LED. - Change GPIO8 LED label from status to system as GPIO8 is connected to SYS_LED. - Add disk-activity default-trigger to system LED. - Switch to the color:function naming scheme. - Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes: - Claim state_default node under pinctrl node. - Change pinctrl0 node name to state-default. - Change gpio node name to gpio-pinmux to respect Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml. - Sort pin groups alphabetically.
Misc fixes: - Fix formatting. - Use the status value "okay". - Define hexadecimal addresses in lower case. - Make hexadecimal addresses for memory easier to read.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1... Tested-by: Sergio Paracuellos sergio.paracuellos@gmail.com Signed-off-by: Arınç ÜNAL arinc.unal@arinc9.com Link: https://lore.kernel.org/r/20220311090320.3068-1-arinc.unal@arinc9.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yu Liao liaoyu15@huawei.com Reviewed-by: Wei Li liwei391@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/staging/mt7621-dts/gbpc1.dts | 40 +++++++++++++--------------- 1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts index a7c0d3115d72..d48ca5a25c2c 100644 --- a/drivers/staging/mt7621-dts/gbpc1.dts +++ b/drivers/staging/mt7621-dts/gbpc1.dts @@ -11,7 +11,8 @@
memory@0 { device_type = "memory"; - reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + reg = <0x00000000 0x1c000000>, + <0x20000000 0x04000000>; };
chosen { @@ -37,24 +38,16 @@ gpio-leds { compatible = "gpio-leds";
- system { - label = "gb-pc1:green:system"; + power { + label = "green:power"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; };
- status { - label = "gb-pc1:green:status"; + system { + label = "green:system"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "gb-pc1:green:lan1"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "gb-pc1:green:lan2"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; }; }; }; @@ -94,9 +87,8 @@
partition@50000 { label = "firmware"; - reg = <0x50000 0x1FB0000>; + reg = <0x50000 0x1fb0000>; }; - }; };
@@ -122,9 +114,12 @@ };
&pinctrl { - state_default: pinctrl0 { - default_gpio: gpio { - groups = "wdt", "rgmii2", "uart3"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: state-default { + gpio-pinmux { + groups = "rgmii2", "uart3", "wdt"; function = "gpio"; }; }; @@ -133,12 +128,13 @@ &switch0 { ports { port@0 { + status = "okay"; label = "ethblack"; - status = "ok"; }; + port@4 { + status = "okay"; label = "ethblue"; - status = "ok"; }; }; };