From: Wolfram Sang wsa@the-dreams.de
commit 38b17afb0ebb9ecd41418d3c08bcf9198af4349d upstream.
Removing attach_adapter from this driver caused a regression for at least some machines. Those machines had the sensors described in their DT, too, so they didn't need manual creation of the sensor devices. The old code worked, though, because manual creation came first. Creation of DT devices then failed later and caused error logs, but the sensors worked nonetheless because of the manually created devices.
When removing attach_adaper, manual creation now comes later and loses the race. The sensor devices were already registered via DT, yet with another binding, so the driver could not be bound to it.
This fix refactors the code to remove the race and only manually creates devices if there are no DT nodes present. Also, the DT binding is updated to match both, the DT and manually created devices. Because we don't know which device creation will be used at runtime, the code to start the kthread is moved to do_probe() which will be called by both methods.
Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723 Reported-by: Erhard Furtner erhard_f@mailbox.org Tested-by: Erhard Furtner erhard_f@mailbox.org Acked-by: Michael Ellerman mpe@ellerman.id.au (powerpc) Signed-off-by: Wolfram Sang wsa@the-dreams.de Cc: stable@kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/macintosh/therm_windtunnel.c | 52 +++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 8c74457..a0d87ed 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -300,9 +300,11 @@ static int control_loop(void *dummy) /* i2c probing and setup */ /************************************************************************/
-static int -do_attach( struct i2c_adapter *adapter ) +static void do_attach(struct i2c_adapter *adapter) { + struct i2c_board_info info = { }; + struct device_node *np; + /* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */ static const unsigned short scan_ds1775[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, @@ -313,25 +315,24 @@ static int control_loop(void *dummy) I2C_CLIENT_END };
- if( strncmp(adapter->name, "uni-n", 5) ) - return 0; - - if( !x.running ) { - struct i2c_board_info info; + if (x.running || strncmp(adapter->name, "uni-n", 5)) + return;
- memset(&info, 0, sizeof(struct i2c_board_info)); - strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE); + np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,ds1775"); + if (np) { + of_node_put(np); + } else { + strlcpy(info.type, "MAC,ds1775", I2C_NAME_SIZE); i2c_new_probed_device(adapter, &info, scan_ds1775, NULL); + }
- strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE); + np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,adm1030"); + if (np) { + of_node_put(np); + } else { + strlcpy(info.type, "MAC,adm1030", I2C_NAME_SIZE); i2c_new_probed_device(adapter, &info, scan_adm1030, NULL); - - if( x.thermostat && x.fan ) { - x.running = 1; - x.poll_task = kthread_run(control_loop, NULL, "g4fand"); - } } - return 0; }
static int @@ -404,8 +405,8 @@ static int control_loop(void *dummy) enum chip { ds1775, adm1030 };
static const struct i2c_device_id therm_windtunnel_id[] = { - { "therm_ds1775", ds1775 }, - { "therm_adm1030", adm1030 }, + { "MAC,ds1775", ds1775 }, + { "MAC,adm1030", adm1030 }, { } }; MODULE_DEVICE_TABLE(i2c, therm_windtunnel_id); @@ -414,6 +415,7 @@ static int control_loop(void *dummy) do_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct i2c_adapter *adapter = cl->adapter; + int ret = 0;
if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_WRITE_BYTE) ) @@ -421,11 +423,19 @@ static int control_loop(void *dummy)
switch (id->driver_data) { case adm1030: - return attach_fan( cl ); + ret = attach_fan(cl); + break; case ds1775: - return attach_thermostat(cl); + ret = attach_thermostat(cl); + break; } - return 0; + + if (!x.running && x.thermostat && x.fan) { + x.running = 1; + x.poll_task = kthread_run(control_loop, NULL, "g4fand"); + } + + return ret; }
static struct i2c_driver g4fan_driver = {