From: Junxiao Bi junxiao.bi@oracle.com
stable inclusion from linux-4.19.201 commit 40b5e3f544a4c464fc509de6f57948b99f50f1b0
--------------------------------
commit 9449ad33be8480f538b11a593e2dda2fb33ca06d upstream.
For punch holes in EOF blocks, fallocate used buffer write to zero the EOF blocks in last cluster. But since ->writepage will ignore EOF pages, those zeros will not be flushed.
This "looks" ok as commit 6bba4471f0cc ("ocfs2: fix data corruption by fallocate") will zero the EOF blocks when extend the file size, but it isn't. The problem happened on those EOF pages, before writeback, those pages had DIRTY flag set and all buffer_head in them also had DIRTY flag set, when writeback run by write_cache_pages(), DIRTY flag on the page was cleared, but DIRTY flag on the buffer_head not.
When next write happened to those EOF pages, since buffer_head already had DIRTY flag set, it would not mark page DIRTY again. That made writeback ignore them forever. That will cause data corruption. Even directio write can't work because it will fail when trying to drop pages caches before direct io, as it found the buffer_head for those pages still had DIRTY flag set, then it will fall back to buffer io mode.
To make a summary of the issue, as writeback ingores EOF pages, once any EOF page is generated, any write to it will only go to the page cache, it will never be flushed to disk even file size extends and that page is not EOF page any more. The fix is to avoid zero EOF blocks with buffer write.
The following code snippet from qemu-img could trigger the corruption.
656 open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11 ... 660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...> 660 fallocate(11, 0, 2275868672, 327680) = 0 658 pwrite64(11, "
Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi junxiao.bi@oracle.com Reviewed-by: Joseph Qi joseph.qi@linux.alibaba.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- fs/ocfs2/file.c | 99 ++++++++++++++++++++++++++++++------------------- 1 file changed, 60 insertions(+), 39 deletions(-)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index c1a46061f9c0e..6ca4dc57f70ba 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1537,6 +1537,45 @@ static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start, } }
+/* + * zero out partial blocks of one cluster. + * + * start: file offset where zero starts, will be made upper block aligned. + * len: it will be trimmed to the end of current cluster if "start + len" + * is bigger than it. + */ +static int ocfs2_zeroout_partial_cluster(struct inode *inode, + u64 start, u64 len) +{ + int ret; + u64 start_block, end_block, nr_blocks; + u64 p_block, offset; + u32 cluster, p_cluster, nr_clusters; + struct super_block *sb = inode->i_sb; + u64 end = ocfs2_align_bytes_to_clusters(sb, start); + + if (start + len < end) + end = start + len; + + start_block = ocfs2_blocks_for_bytes(sb, start); + end_block = ocfs2_blocks_for_bytes(sb, end); + nr_blocks = end_block - start_block; + if (!nr_blocks) + return 0; + + cluster = ocfs2_bytes_to_clusters(sb, start); + ret = ocfs2_get_clusters(inode, cluster, &p_cluster, + &nr_clusters, NULL); + if (ret) + return ret; + if (!p_cluster) + return 0; + + offset = start_block - ocfs2_clusters_to_blocks(sb, cluster); + p_block = ocfs2_clusters_to_blocks(sb, p_cluster) + offset; + return sb_issue_zeroout(sb, p_block, nr_blocks, GFP_NOFS); +} + static int ocfs2_zero_partial_clusters(struct inode *inode, u64 start, u64 len) { @@ -1546,6 +1585,7 @@ static int ocfs2_zero_partial_clusters(struct inode *inode, struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); unsigned int csize = osb->s_clustersize; handle_t *handle; + loff_t isize = i_size_read(inode);
/* * The "start" and "end" values are NOT necessarily part of @@ -1566,6 +1606,26 @@ static int ocfs2_zero_partial_clusters(struct inode *inode, if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0) goto out;
+ /* No page cache for EOF blocks, issue zero out to disk. */ + if (end > isize) { + /* + * zeroout eof blocks in last cluster starting from + * "isize" even "start" > "isize" because it is + * complicated to zeroout just at "start" as "start" + * may be not aligned with block size, buffer write + * would be required to do that, but out of eof buffer + * write is not supported. + */ + ret = ocfs2_zeroout_partial_cluster(inode, isize, + end - isize); + if (ret) { + mlog_errno(ret); + goto out; + } + if (start >= isize) + goto out; + end = isize; + } handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); if (IS_ERR(handle)) { ret = PTR_ERR(handle); @@ -1863,45 +1923,6 @@ int ocfs2_remove_inode_range(struct inode *inode, return ret; }
-/* - * zero out partial blocks of one cluster. - * - * start: file offset where zero starts, will be made upper block aligned. - * len: it will be trimmed to the end of current cluster if "start + len" - * is bigger than it. - */ -static int ocfs2_zeroout_partial_cluster(struct inode *inode, - u64 start, u64 len) -{ - int ret; - u64 start_block, end_block, nr_blocks; - u64 p_block, offset; - u32 cluster, p_cluster, nr_clusters; - struct super_block *sb = inode->i_sb; - u64 end = ocfs2_align_bytes_to_clusters(sb, start); - - if (start + len < end) - end = start + len; - - start_block = ocfs2_blocks_for_bytes(sb, start); - end_block = ocfs2_blocks_for_bytes(sb, end); - nr_blocks = end_block - start_block; - if (!nr_blocks) - return 0; - - cluster = ocfs2_bytes_to_clusters(sb, start); - ret = ocfs2_get_clusters(inode, cluster, &p_cluster, - &nr_clusters, NULL); - if (ret) - return ret; - if (!p_cluster) - return 0; - - offset = start_block - ocfs2_clusters_to_blocks(sb, cluster); - p_block = ocfs2_clusters_to_blocks(sb, p_cluster) + offset; - return sb_issue_zeroout(sb, p_block, nr_blocks, GFP_NOFS); -} - /* * Parts of this function taken from xfs_change_file_space() */