From: Akihiro Tsukada tskd08@gmail.com
[ Upstream commit 15d90a6ae98e6d2c68497b44a491cb9efbb98ab1 ]
earth-pt1 driver was decomposed/restructured by the commit b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"), but it introduced a problem regarding concurrent streaming: Opening a new terrestial stream stops the reception of an existing, already-opened satellite stream.
The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks, supporting 4 concurrent demodulations, and the above problem was because the config of a terr. block contained whole reset/init of the pair blocks, thus each open() of a terrestrial frontend wrongly cleared the config of its peer satellite block of the demod. This whole/pair reset should be executed earlier and not on each open().
Fixes: b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers")
Signed-off-by: Akihiro Tsukada tskd08@gmail.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/media/pci/pt1/pt1.c | 54 ++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-)
diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c index 7f878fc..93fecff 100644 --- a/drivers/media/pci/pt1/pt1.c +++ b/drivers/media/pci/pt1/pt1.c @@ -200,16 +200,10 @@ struct pt1_config { static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk) { int ret; - u8 buf[2] = {0x01, 0x80}; bool is_sat; const u8 (*cfg_data)[2]; int i, len;
- ret = i2c_master_send(cl, buf, 2); - if (ret < 0) - return ret; - usleep_range(30000, 50000); - is_sat = !strncmp(cl->name, TC90522_I2C_DEV_SAT, strlen(TC90522_I2C_DEV_SAT)); if (is_sat) { @@ -260,6 +254,46 @@ static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk) return 0; }
+/* + * Init registers for (each pair of) terrestrial/satellite block in demod. + * Note that resetting terr. block also resets its peer sat. block as well. + * This function must be called before configuring any demod block + * (before pt1_wakeup(), fe->ops.init()). + */ +static int pt1_demod_block_init(struct pt1 *pt1) +{ + struct i2c_client *cl; + u8 buf[2] = {0x01, 0x80}; + int ret; + int i; + + /* reset all terr. & sat. pairs first */ + for (i = 0; i < PT1_NR_ADAPS; i++) { + cl = pt1->adaps[i]->demod_i2c_client; + if (strncmp(cl->name, TC90522_I2C_DEV_TER, + strlen(TC90522_I2C_DEV_TER))) + continue; + + ret = i2c_master_send(cl, buf, 2); + if (ret < 0) + return ret; + usleep_range(30000, 50000); + } + + for (i = 0; i < PT1_NR_ADAPS; i++) { + cl = pt1->adaps[i]->demod_i2c_client; + if (strncmp(cl->name, TC90522_I2C_DEV_SAT, + strlen(TC90522_I2C_DEV_SAT))) + continue; + + ret = i2c_master_send(cl, buf, 2); + if (ret < 0) + return ret; + usleep_range(30000, 50000); + } + return 0; +} + static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data) { writel(data, pt1->regs + reg * 4); @@ -987,6 +1021,10 @@ static int pt1_init_frontends(struct pt1 *pt1) goto tuner_release; }
+ ret = pt1_demod_block_init(pt1); + if (ret < 0) + goto fe_unregister; + return 0;
tuner_release: @@ -1245,6 +1283,10 @@ static int pt1_resume(struct device *dev) pt1_update_power(pt1); usleep_range(1000, 2000);
+ ret = pt1_demod_block_init(pt1); + if (ret < 0) + goto resume_err; + for (i = 0; i < PT1_NR_ADAPS; i++) dvb_frontend_reinitialise(pt1->adaps[i]->fe);