From: Amelie Delaunay amelie.delaunay@foss.st.com
stable inclusion from stable-5.10.80 commit fc86da757db716f5def66ec954d4e07da7948bac bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 8d387f61b0240854e81450c261beb775065bad5d ]
In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG). The clock is then enabled on udc_start. If dwc2_drd_role_sw_set is called before udc_start (it is the case if the usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be read/written, so session cannot be overridden. To avoid this case, check the ll_hw_enabled value and enable the clock if it is available, and disable it after the override.
Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Acked-by: Minas Harutyunyan Minas.Harutyunyan@synopsys.com Signed-off-by: Amelie Delaunay amelie.delaunay@foss.st.com Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Chen Jun chenjun102@huawei.com Reviewed-by: Weilong Chen chenweilong@huawei.com Acked-by: Weilong Chen chenweilong@huawei.com
Signed-off-by: Chen Jun chenjun102@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/usb/dwc2/drd.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c index 80eae88d76dd..99672360f34b 100644 --- a/drivers/usb/dwc2/drd.c +++ b/drivers/usb/dwc2/drd.c @@ -7,6 +7,7 @@ * Author(s): Amelie Delaunay amelie.delaunay@st.com */
+#include <linux/clk.h> #include <linux/iopoll.h> #include <linux/platform_device.h> #include <linux/usb/role.h> @@ -86,6 +87,20 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) } #endif
+ /* + * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of + * the probe and enabled on udc_start. + * If role-switch set is called before the udc_start, we need to enable + * the clock to read/write GOTGCTL and GUSBCFG registers to override + * mode and sessions. It is the case if cable is plugged at boot. + */ + if (!hsotg->ll_hw_enabled && hsotg->clk) { + int ret = clk_prepare_enable(hsotg->clk); + + if (ret) + return ret; + } + spin_lock_irqsave(&hsotg->lock, flags);
if (role == USB_ROLE_HOST) { @@ -110,6 +125,9 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) /* This will raise a Connector ID Status Change Interrupt */ dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+ if (!hsotg->ll_hw_enabled && hsotg->clk) + clk_disable_unprepare(hsotg->clk); + dev_dbg(hsotg->dev, "%s-session valid\n", role == USB_ROLE_NONE ? "No" : role == USB_ROLE_HOST ? "A" : "B");