From: Barry Song song.bao.hua@hisilicon.com
mainline inclusion from mainline-v5.12-rc2 commit cbe16f35bee6880becca6f20d2ebf6b457148552 category: bugfix bugzilla: 175148 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
------------------------------------------------------------------------
Many drivers don't want interrupts enabled automatically via request_irq(). So they are handling this issue by either way of the below two:
(1) irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...);
(2) request_irq(dev, irq...); disable_irq(irq);
The code in the second way is silly and unsafe. In the small time gap between request_irq() and disable_irq(), interrupts can still come.
The code in the first way is safe though it's subobtimal.
Add a new IRQF_NO_AUTOEN flag which can be handed in by drivers to request_irq() and request_nmi(). It prevents the automatic enabling of the requested interrupt/nmi in the same safe way as #1 above. With that the various usage sites of #1 and #2 above can be simplified and corrected.
Signed-off-by: Barry Song song.bao.hua@hisilicon.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Ingo Molnar mingo@kernel.org Cc: dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20210302224916.13980-2-song.bao.hua@hisilicon.com Reviewed-by: Shaokun Zhang zhangshaokun@hisilicon.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- include/linux/interrupt.h | 4 ++++ kernel/irq/manage.c | 11 +++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 087a1cfad35c..c67d53aeb30a 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -61,6 +61,9 @@ * interrupt handler after suspending interrupts. For system * wakeup devices users need to implement wakeup detection in * their interrupt handlers. + * IRQF_NO_AUTOEN - Don't enable IRQ or NMI automatically when users request it. + * Users will enable it explicitly by enable_irq() or enable_nmi() + * later. */ #define IRQF_SHARED 0x00000080 #define IRQF_PROBE_SHARED 0x00000100 @@ -74,6 +77,7 @@ #define IRQF_NO_THREAD 0x00010000 #define IRQF_EARLY_RESUME 0x00020000 #define IRQF_COND_SUSPEND 0x00040000 +#define IRQF_NO_AUTOEN 0x00080000
#define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index b2d569f313a1..5d92b87932b9 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1658,7 +1658,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) irqd_set(&desc->irq_data, IRQD_NO_BALANCING); }
- if (irq_settings_can_autoenable(desc)) { + if (!(new->flags & IRQF_NO_AUTOEN) && + irq_settings_can_autoenable(desc)) { irq_startup(desc, IRQ_RESEND, IRQ_START_COND); } else { /* @@ -2051,10 +2052,15 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler, * which interrupt is which (messes up the interrupt freeing * logic etc). * + * Also shared interrupts do not go well with disabling auto enable. + * The sharing interrupt might request it while it's still disabled + * and then wait for interrupts forever. + * * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and * it cannot be set along with IRQF_NO_SUSPEND. */ if (((irqflags & IRQF_SHARED) && !dev_id) || + ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) || (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) || ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND))) return -EINVAL; @@ -2210,7 +2216,8 @@ int request_nmi(unsigned int irq, irq_handler_t handler,
desc = irq_to_desc(irq);
- if (!desc || irq_settings_can_autoenable(desc) || + if (!desc || (irq_settings_can_autoenable(desc) && + !(irqflags & IRQF_NO_AUTOEN)) || !irq_settings_can_request(desc) || WARN_ON(irq_settings_is_per_cpu_devid(desc)) || !irq_supports_nmi(desc))