From: Pali Rohár pali@kernel.org
stable inclusion from stable-v5.10.106 commit 8bfb959ea28df90b00485b49513d05fffd48ad75 bugzilla: https://gitee.com/openeuler/kernel/issues/I573US
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream.
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") kernel can set different PCIe address on CPU and different on the bus for the one A37xx address mapping without any firmware support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O space can be set to address 0x0 too because MEM space and I/O space are separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to due bootloader bug.
Signed-off-by: Pali Rohár pali@kernel.org Reported-by: Arnd Bergmann arnd@arndb.de Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space") Reviewed-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yu Liao liaoyu15@huawei.com Reviewed-by: Wei Li liwei391@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 7 ++++++- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index ad963b51dcbe..00e5dbf4b823 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -138,7 +138,9 @@ /* * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and - * 2 size cells and also expects that the second range starts at 16 MB offset. If these + * 2 size cells and also expects that the second range starts at 16 MB offset. Also it + * expects that first range uses same address for PCI (child) and CPU (parent) cells (so + * no remapping) and that this address is the lowest from all specified ranges. If these * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. @@ -147,6 +149,9 @@ * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089... * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6... * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd... + * Bug related to requirement of same child and parent addresses for first range is fixed + * in U-Boot version 2022.04 by following commit: + * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5f... */ #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 2a2015a15362..0f4bcd15d858 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -495,7 +495,7 @@ * (totaling 127 MiB) for MEM. */ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ - 0x81000000 0 0xefff0000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ + 0x81000000 0 0x00000000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc 0>, <0 0 0 2 &pcie_intc 1>,