From: Eugen Hristev eugen.hristev@collabora.com
stable inclusion from stable-v6.6.7 commit b6eccbcb1bcc8694c5998f37c72dce340a1d2d7c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8SSQ4
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit 9adf7580f6d498a5839e02fa1d1535e934364602 upstream.
Clocks for each power domain are split into big categories: pd clocks and subsys clocks. According to the binding, all clocks which have a dash '-' in their name are treated as subsys clocks, and must be placed at the end of the list. The other clocks which are pd clocks must come first. Fixed the naming and the placing of all clocks in the power domains. For the avoidance of doubt, prefixed all subsys clocks with the 'subsys' prefix. The binding does not enforce strict clock names, the driver uses them in bulk, only making a difference for pd clocks vs subsys clocks.
The above problem appears to be trivial, however, it leads to incorrect power up and power down sequence of the power domains, because some clocks will be mistakenly taken for subsys clocks and viceversa. One consequence is the fact that if the DIS power domain goes power down and power back up during the boot process, when it comes back up, there are still transactions left on the bus which makes the display inoperable.
Some of the clocks for the DIS power domain were wrongly using '_' instead of '-', which again made these clocks being treated as pd clocks instead of subsys clocks.
Cc: stable@vger.kernel.org Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller") Signed-off-by: Eugen Hristev eugen.hristev@collabora.com Tested-by: Chen-Yu Tsai wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Tested-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Alexandre Mergnat amergnat@baylibre.com Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.co... Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- arch/arm64/boot/dts/mediatek/mt8186.dtsi | 42 +++++++++++++++--------- 1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index f04ae70c470a..8598aa153b56 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -924,7 +924,8 @@ reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>; clocks = <&topckgen CLK_TOP_SENINF>, <&topckgen CLK_TOP_SENINF1>; - clock-names = "csirx_top0", "csirx_top1"; + clock-names = "subsys-csirx-top0", + "subsys-csirx-top1"; #power-domain-cells = <0>; };
@@ -942,7 +943,8 @@ reg = <MT8186_POWER_DOMAIN_ADSP_AO>; clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>; - clock-names = "audioadsp", "adsp_bus"; + clock-names = "audioadsp", + "subsys-adsp-bus"; #address-cells = <1>; #size-cells = <0>; #power-domain-cells = <1>; @@ -975,8 +977,11 @@ <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_GALS>, <&mmsys CLK_MM_SMI_IOMMU>; - clock-names = "disp", "mdp", "smi_infra", "smi_common", - "smi_gals", "smi_iommu"; + clock-names = "disp", "mdp", + "subsys-smi-infra", + "subsys-smi-common", + "subsys-smi-gals", + "subsys-smi-iommu"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -993,15 +998,17 @@
power-domain@MT8186_POWER_DOMAIN_CAM { reg = <MT8186_POWER_DOMAIN_CAM>; - clocks = <&topckgen CLK_TOP_CAM>, - <&topckgen CLK_TOP_SENINF>, + clocks = <&topckgen CLK_TOP_SENINF>, <&topckgen CLK_TOP_SENINF1>, <&topckgen CLK_TOP_SENINF2>, <&topckgen CLK_TOP_SENINF3>, + <&camsys CLK_CAM2MM_GALS>, <&topckgen CLK_TOP_CAMTM>, - <&camsys CLK_CAM2MM_GALS>; - clock-names = "cam-top", "cam0", "cam1", "cam2", - "cam3", "cam-tm", "gals"; + <&topckgen CLK_TOP_CAM>; + clock-names = "cam0", "cam1", "cam2", + "cam3", "gals", + "subsys-cam-tm", + "subsys-cam-top"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -1020,9 +1027,9 @@
power-domain@MT8186_POWER_DOMAIN_IMG { reg = <MT8186_POWER_DOMAIN_IMG>; - clocks = <&topckgen CLK_TOP_IMG1>, - <&imgsys1 CLK_IMG1_GALS_IMG1>; - clock-names = "img-top", "gals"; + clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>, + <&topckgen CLK_TOP_IMG1>; + clock-names = "gals", "subsys-img-top"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -1041,8 +1048,11 @@ <&ipesys CLK_IPE_LARB20>, <&ipesys CLK_IPE_SMI_SUBCOM>, <&ipesys CLK_IPE_GALS_IPE>; - clock-names = "ipe-top", "ipe-larb0", "ipe-larb1", - "ipe-smi", "ipe-gals"; + clock-names = "subsys-ipe-top", + "subsys-ipe-larb0", + "subsys-ipe-larb1", + "subsys-ipe-smi", + "subsys-ipe-gals"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; }; @@ -1061,7 +1071,9 @@ clocks = <&topckgen CLK_TOP_WPE>, <&wpesys CLK_WPE_SMI_LARB8_CK_EN>, <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>; - clock-names = "wpe0", "larb-ck", "larb-pclk"; + clock-names = "wpe0", + "subsys-larb-ck", + "subsys-larb-pclk"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; };