From: Sven Van Asbroeck TheSven73@gmail.com
commit 9cc5f232a4b6a0ef6e9b57876d61b88f61bdd7c2 upstream.
This driver allows pwms to be requested as gpios via gpiolib. Obviously, it should not be allowed to request a GPIO when its corresponding PWM is already requested (and vice versa). So it requires some exclusion code.
Given that the PWMm and GPIO cores are not synchronized with respect to each other, this exclusion code will also require proper synchronization.
Such a mechanism was in place, but was inadvertently removed by Uwe's clean-up in commit e926b12c611c ("pwm: Clear chip_data in pwm_put()").
Upon revisiting the synchronization mechanism, we found that theoretically, it could allow two threads to successfully request conflicting PWMs/GPIOs.
Replace with a bitmap which tracks PWMs in-use, plus a mutex. As long as PWM and GPIO's respective request/free functions modify the in-use bitmap while holding the mutex, proper synchronization will be guaranteed.
Reported-by: YueHaibing yuehaibing@huawei.com Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()") Cc: Mika Westerberg mika.westerberg@linux.intel.com Cc: Uwe Kleine-König u.kleine-koenig@pengutronix.de Cc: YueHaibing yuehaibing@huawei.com Link: https://lkml.org/lkml/2019/5/31/963 Signed-off-by: Sven Van Asbroeck TheSven73@gmail.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com [cg: Tested on an i.MX6Q board with two NXP PCA9685 chips] Tested-by: Clemens Gruber clemens.gruber@pqgruber.com Reviewed-by: Sven Van Asbroeck TheSven73@gmail.com # cg's rebase Link: https://lore.kernel.org/lkml/20200330160238.GD2817345@ulmo/ Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pwm/pwm-pca9685.c | 85 ++++++++++++++++++++++++++--------------------- 1 file changed, 48 insertions(+), 37 deletions(-)
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c index e1e5dfc..259fd58 100644 --- a/drivers/pwm/pwm-pca9685.c +++ b/drivers/pwm/pwm-pca9685.c @@ -31,6 +31,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/pm_runtime.h> +#include <linux/bitmap.h>
/* * Because the PCA9685 has only one prescaler per chip, changing the period of @@ -85,6 +86,7 @@ struct pca9685 { #if IS_ENABLED(CONFIG_GPIOLIB) struct mutex lock; struct gpio_chip gpio; + DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1); #endif };
@@ -94,51 +96,51 @@ static inline struct pca9685 *to_pca(struct pwm_chip *chip) }
#if IS_ENABLED(CONFIG_GPIOLIB) -static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset) +static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx) { - struct pca9685 *pca = gpiochip_get_data(gpio); - struct pwm_device *pwm; + bool is_inuse;
mutex_lock(&pca->lock); - - pwm = &pca->chip.pwms[offset]; - - if (pwm->flags & (PWMF_REQUESTED | PWMF_EXPORTED)) { - mutex_unlock(&pca->lock); - return -EBUSY; + if (pwm_idx >= PCA9685_MAXCHAN) { + /* + * "all LEDs" channel: + * pretend already in use if any of the PWMs are requested + */ + if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) { + is_inuse = true; + goto out; + } + } else { + /* + * regular channel: + * pretend already in use if the "all LEDs" channel is requested + */ + if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) { + is_inuse = true; + goto out; + } } - - pwm_set_chip_data(pwm, (void *)1); - + is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse); +out: mutex_unlock(&pca->lock); - pm_runtime_get_sync(pca->chip.dev); - return 0; + return is_inuse; }
-static bool pca9685_pwm_is_gpio(struct pca9685 *pca, struct pwm_device *pwm) +static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx) { - bool is_gpio = false; - mutex_lock(&pca->lock); + clear_bit(pwm_idx, pca->pwms_inuse); + mutex_unlock(&pca->lock); +}
- if (pwm->hwpwm >= PCA9685_MAXCHAN) { - unsigned int i; - - /* - * Check if any of the GPIOs are requested and in that case - * prevent using the "all LEDs" channel. - */ - for (i = 0; i < pca->gpio.ngpio; i++) - if (gpiochip_is_requested(&pca->gpio, i)) { - is_gpio = true; - break; - } - } else if (pwm_get_chip_data(pwm)) { - is_gpio = true; - } +static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset) +{ + struct pca9685 *pca = gpiochip_get_data(gpio);
- mutex_unlock(&pca->lock); - return is_gpio; + if (pca9685_pwm_test_and_set_inuse(pca, offset)) + return -EBUSY; + pm_runtime_get_sync(pca->chip.dev); + return 0; }
static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset) @@ -173,6 +175,7 @@ static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
pca9685_pwm_gpio_set(gpio, offset, 0); pm_runtime_put(pca->chip.dev); + pca9685_pwm_clear_inuse(pca, offset); }
static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip, @@ -224,12 +227,17 @@ static int pca9685_pwm_gpio_probe(struct pca9685 *pca) return devm_gpiochip_add_data(dev, &pca->gpio, pca); } #else -static inline bool pca9685_pwm_is_gpio(struct pca9685 *pca, - struct pwm_device *pwm) +static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, + int pwm_idx) { return false; }
+static inline void +pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx) +{ +} + static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca) { return 0; @@ -413,7 +421,7 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) { struct pca9685 *pca = to_pca(chip);
- if (pca9685_pwm_is_gpio(pca, pwm)) + if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm)) return -EBUSY; pm_runtime_get_sync(chip->dev);
@@ -422,8 +430,11 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { + struct pca9685 *pca = to_pca(chip); + pca9685_pwm_disable(chip, pwm); pm_runtime_put(chip->dev); + pca9685_pwm_clear_inuse(pca, pwm->hwpwm); }
static const struct pwm_ops pca9685_pwm_ops = {