From: Keith Busch keith.busch@intel.com
mainline inclusion from mainline-v5.2-rc1 commit 13bac55ef7aef8ecb67ff3005d24b05a464d28ea category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I47H3V CVE: NA
--------------------------------
commit 13bac55ef7aef8ecb67ff3005d24b05a464d28ea upstream.
Platforms may provide system memory where some physical address ranges perform differently than others, or is cached by the system on the memory side.
Add documentation describing a high level overview of such systems and the perforamnce and caching attributes the kernel provides for applications wishing to query this information.
Reviewed-by: Mike Rapoport rppt@linux.ibm.com Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Keith Busch keith.busch@intel.com Tested-by: Brice Goglin Brice.Goglin@inria.fr Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Fan Du fan.du@intel.com Signed-off-by: Jackie Liu liuyun01@kylinos.cn Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Hanjun Guo guohanjun@huawei.com Reviewed-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- Documentation/admin-guide/mm/numaperf.rst | 169 ++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 Documentation/admin-guide/mm/numaperf.rst
diff --git a/Documentation/admin-guide/mm/numaperf.rst b/Documentation/admin-guide/mm/numaperf.rst new file mode 100644 index 0000000000000..b79f70c04397d --- /dev/null +++ b/Documentation/admin-guide/mm/numaperf.rst @@ -0,0 +1,169 @@ +.. _numaperf: + +============= +NUMA Locality +============= + +Some platforms may have multiple types of memory attached to a compute +node. These disparate memory ranges may share some characteristics, such +as CPU cache coherence, but may have different performance. For example, +different media types and buses affect bandwidth and latency. + +A system supports such heterogeneous memory by grouping each memory type +under different domains, or "nodes", based on locality and performance +characteristics. Some memory may share the same node as a CPU, and others +are provided as memory only nodes. While memory only nodes do not provide +CPUs, they may still be local to one or more compute nodes relative to +other nodes. The following diagram shows one such example of two compute +nodes with local memory and a memory only node for each of compute node: + + +------------------+ +------------------+ + | Compute Node 0 +-----+ Compute Node 1 | + | Local Node0 Mem | | Local Node1 Mem | + +--------+---------+ +--------+---------+ + | | + +--------+---------+ +--------+---------+ + | Slower Node2 Mem | | Slower Node3 Mem | + +------------------+ +--------+---------+ + +A "memory initiator" is a node containing one or more devices such as +CPUs or separate memory I/O devices that can initiate memory requests. +A "memory target" is a node containing one or more physical address +ranges accessible from one or more memory initiators. + +When multiple memory initiators exist, they may not all have the same +performance when accessing a given memory target. Each initiator-target +pair may be organized into different ranked access classes to represent +this relationship. The highest performing initiator to a given target +is considered to be one of that target's local initiators, and given +the highest access class, 0. Any given target may have one or more +local initiators, and any given initiator may have multiple local +memory targets. + +To aid applications matching memory targets with their initiators, the +kernel provides symlinks to each other. The following example lists the +relationship for the access class "0" memory initiators and targets:: + + # symlinks -v /sys/devices/system/node/nodeX/access0/targets/ + relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY + + # symlinks -v /sys/devices/system/node/nodeY/access0/initiators/ + relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX + +A memory initiator may have multiple memory targets in the same access +class. The target memory's initiators in a given class indicate the +nodes' access characteristics share the same performance relative to other +linked initiator nodes. Each target within an initiator's access class, +though, do not necessarily perform the same as each other. + +================ +NUMA Performance +================ + +Applications may wish to consider which node they want their memory to +be allocated from based on the node's performance characteristics. If +the system provides these attributes, the kernel exports them under the +node sysfs hierarchy by appending the attributes directory under the +memory node's access class 0 initiators as follows:: + + /sys/devices/system/node/nodeY/access0/initiators/ + +These attributes apply only when accessed from nodes that have the +are linked under the this access's inititiators. + +The performance characteristics the kernel provides for the local initiators +are exported are as follows:: + + # tree -P "read*|write*" /sys/devices/system/node/nodeY/access0/initiators/ + /sys/devices/system/node/nodeY/access0/initiators/ + |-- read_bandwidth + |-- read_latency + |-- write_bandwidth + `-- write_latency + +The bandwidth attributes are provided in MiB/second. + +The latency attributes are provided in nanoseconds. + +The values reported here correspond to the rated latency and bandwidth +for the platform. + +========== +NUMA Cache +========== + +System memory may be constructed in a hierarchy of elements with various +performance characteristics in order to provide large address space of +slower performing memory cached by a smaller higher performing memory. The +system physical addresses memory initiators are aware of are provided +by the last memory level in the hierarchy. The system meanwhile uses +higher performing memory to transparently cache access to progressively +slower levels. + +The term "far memory" is used to denote the last level memory in the +hierarchy. Each increasing cache level provides higher performing +initiator access, and the term "near memory" represents the fastest +cache provided by the system. + +This numbering is different than CPU caches where the cache level (ex: +L1, L2, L3) uses the CPU-side view where each increased level is lower +performing. In contrast, the memory cache level is centric to the last +level memory, so the higher numbered cache level corresponds to memory +nearer to the CPU, and further from far memory. + +The memory-side caches are not directly addressable by software. When +software accesses a system address, the system will return it from the +near memory cache if it is present. If it is not present, the system +accesses the next level of memory until there is either a hit in that +cache level, or it reaches far memory. + +An application does not need to know about caching attributes in order +to use the system. Software may optionally query the memory cache +attributes in order to maximize the performance out of such a setup. +If the system provides a way for the kernel to discover this information, +for example with ACPI HMAT (Heterogeneous Memory Attribute Table), +the kernel will append these attributes to the NUMA node memory target. + +When the kernel first registers a memory cache with a node, the kernel +will create the following directory:: + + /sys/devices/system/node/nodeX/memory_side_cache/ + +If that directory is not present, the system either does not not provide +a memory-side cache, or that information is not accessible to the kernel. + +The attributes for each level of cache is provided under its cache +level index:: + + /sys/devices/system/node/nodeX/memory_side_cache/indexA/ + /sys/devices/system/node/nodeX/memory_side_cache/indexB/ + /sys/devices/system/node/nodeX/memory_side_cache/indexC/ + +Each cache level's directory provides its attributes. For example, the +following shows a single cache level and the attributes available for +software to query:: + + # tree sys/devices/system/node/node0/memory_side_cache/ + /sys/devices/system/node/node0/memory_side_cache/ + |-- index1 + | |-- indexing + | |-- line_size + | |-- size + | `-- write_policy + +The "indexing" will be 0 if it is a direct-mapped cache, and non-zero +for any other indexed based, multi-way associativity. + +The "line_size" is the number of bytes accessed from the next cache +level on a miss. + +The "size" is the number of bytes provided by this cache level. + +The "write_policy" will be 0 for write-back, and non-zero for +write-through caching. + +======== +See Also +======== +.. [1] https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf + Section 5.2.27