From: Greg Kroah-Hartman gregkh@linuxfoundation.org
mainline inclusion from mainline-v5.10-rc1 commit 719b8f2850d3d9b863cc5e4f08e9ef0206e45b26 category: bugfix bugzilla: 188090, https://gitee.com/src-openeuler/kernel/issues/I6068W CVE: CVE-2022-3903
--------------------------------
New core functions to make sending/receiving USB control messages easier and saner.
In discussions, it turns out that the large majority of users of usb_control_msg() do so in potentially incorrect ways. The most common issue is where a "short" message is received, yet never detected properly due to "incorrect" error handling.
Handle all of this in the USB core with two new functions to try to make working with USB control messages simpler.
No more need for dynamic data, messages can be on the stack, and only "complete" send/receive will work without causing an error.
Link: https://lore.kernel.org/r/20200914153756.3412156-3-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
The parts related to usb_control_msg_send() and usb_control_msg_recv() in commit USB: correct API of usb_control_msg_send/recv are added to solve CVE. Commit USB: core: drop pipe-type check from new control-message helpers is also added. Signed-off-by: Zhang Peng zhangpeng362@huawei.com Reviewed-by: Xiu Jianfeng xiujianfeng@huawei.com Reviewed-by: Kefeng Wang wangkefeng.wang@huawei.com Signed-off-by: Yongqiang Liu liuyongqiang13@huawei.com --- drivers/usb/core/message.c | 134 +++++++++++++++++++++++++++++++++++++ include/linux/usb.h | 8 +++ 2 files changed, 142 insertions(+)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index fcf84bfc08e3..0be20b17e754 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -161,6 +161,140 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, } EXPORT_SYMBOL_GPL(usb_control_msg);
+/** + * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to send + * @size: length in bytes of the data to send + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is not + * expected to fill in a response (i.e. a "send message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else, + * as it will not be modified at all. This does not have the restriction that + * usb_control_msg() has where the data pointer must be to dynamically allocated + * memory (i.e. memory that can be successfully DMAed to a device). + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_sndctrlpipe(dev, endpoint); + int ret; + u8 *data = NULL; + + if (size) { + data = kmemdup(driver_data, size, memflags); + if (!data) + return -ENOMEM; + } + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + kfree(data); + + if (ret < 0) + return ret; + if (ret == size) + return 0; + return -EINVAL; +} +EXPORT_SYMBOL_GPL(usb_control_msg_send); + +/** + * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion + * @dev: pointer to the usb device to send the message to + * @endpoint: endpoint to send the message to + * @request: USB message request value + * @requesttype: USB message request type value + * @value: USB message value + * @index: USB message index value + * @driver_data: pointer to the data to be filled in by the message + * @size: length in bytes of the data to be received + * @timeout: time in msecs to wait for the message to complete before timing + * out (if 0 the wait is forever) + * @memflags: the flags for memory allocation for buffers + * + * Context: !in_interrupt () + * + * This function sends a control message to a specified endpoint that is + * expected to fill in a response (i.e. a "receive message") and waits for the + * message to complete, or timeout. + * + * Do not use this function from within an interrupt context. If you need + * an asynchronous message, or need to send a message from within interrupt + * context, use usb_submit_urb(). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. Since you + * don't have a handle on the URB used, you can't cancel the request. + * + * The data pointer can be made to a reference on the stack, or anywhere else + * that can be successfully written to. This function does not have the + * restriction that usb_control_msg() has where the data pointer must be to + * dynamically allocated memory (i.e. memory that can be successfully DMAed to a + * device). + * + * The "whole" message must be properly received from the device in order for + * this function to be successful. If a device returns less than the expected + * amount of data, then the function will fail. Do not use this for messages + * where a variable amount of data might be returned. + * + * Return: If successful, 0 is returned, Otherwise, a negative error number. + */ +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *driver_data, __u16 size, int timeout, + gfp_t memflags) +{ + unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); + int ret; + u8 *data; + + if (!size || !driver_data) + return -EINVAL; + + data = kmalloc(size, memflags); + if (!data) + return -ENOMEM; + + ret = usb_control_msg(dev, pipe, request, requesttype, value, index, + data, size, timeout); + + if (ret < 0) + goto exit; + + if (ret == size) { + memcpy(driver_data, data, size); + ret = 0; + } else { + ret = -EINVAL; + } + +exit: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(usb_control_msg_recv); + /** * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to diff --git a/include/linux/usb.h b/include/linux/usb.h index ff010d1fd1c7..3e1e31f73d0e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1783,6 +1783,14 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, int timeout);
/* wrappers around usb_control_msg() for the most common standard requests */ +int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + const void *data, __u16 size, int timeout, + gfp_t memflags); +int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, + __u8 requesttype, __u16 value, __u16 index, + void *data, __u16 size, int timeout, + gfp_t memflags); extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, unsigned char descindex, void *buf, int size); extern int usb_get_status(struct usb_device *dev,