From: "Jason A. Donenfeld" Jason@zx2c4.com
stable inclusion from stable-v5.10.119 commit 7873321cd88ffa2deafd7a156da29949e5a969c7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5L6BB
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit 5f75d9f3babea8ae0a2d06724656874f41d317f5 upstream.
Now that we've re-documented the various sections, we can remove the outdated text here and replace it with a high-level overview.
Cc: Theodore Ts'o tytso@mit.edu Reviewed-by: Eric Biggers ebiggers@google.com Reviewed-by: Dominik Brodowski linux@dominikbrodowski.net Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Acked-by: Xie XiuQi xiexiuqi@huawei.com --- drivers/char/random.c | 183 +++++------------------------------------- 1 file changed, 21 insertions(+), 162 deletions(-)
diff --git a/drivers/char/random.c b/drivers/char/random.c index 9a23983f3dac..2b462d9a1563 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -2,168 +2,27 @@ /* * Copyright (C) 2017-2022 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. * Copyright Matt Mackall mpm@selenic.com, 2003, 2004, 2005 - * Copyright Theodore Ts'o, 1994, 1995, 1996, 1997, 1998, 1999. All - * rights reserved. - */ - -/* - * Exported interfaces ---- output - * =============================== - * - * There are four exported interfaces; two for use within the kernel, - * and two for use from userspace. - * - * Exported interfaces ---- userspace output - * ----------------------------------------- - * - * The userspace interfaces are two character devices /dev/random and - * /dev/urandom. /dev/random is suitable for use when very high - * quality randomness is desired (for example, for key generation or - * one-time pads), as it will only return a maximum of the number of - * bits of randomness (as estimated by the random number generator) - * contained in the entropy pool. - * - * The /dev/urandom device does not have this limit, and will return - * as many bytes as are requested. As more and more random bytes are - * requested without giving time for the entropy pool to recharge, - * this will result in random numbers that are merely cryptographically - * strong. For many applications, however, this is acceptable. - * - * Exported interfaces ---- kernel output - * -------------------------------------- - * - * The primary kernel interfaces are: - * - * void get_random_bytes(void *buf, size_t nbytes); - * u32 get_random_u32() - * u64 get_random_u64() - * unsigned int get_random_int() - * unsigned long get_random_long() - * - * These interfaces will return the requested number of random bytes - * into the given buffer or as a return value. This is equivalent to a - * read from /dev/urandom. The get_random_{u32,u64,int,long}() family - * of functions may be higher performance for one-off random integers, - * because they do a bit of buffering. - * - * prandom_u32() - * ------------- - * - * For even weaker applications, see the pseudorandom generator - * prandom_u32(), prandom_max(), and prandom_bytes(). If the random - * numbers aren't security-critical at all, these are *far* cheaper. - * Useful for self-tests, random error simulation, randomized backoffs, - * and any other application where you trust that nobody is trying to - * maliciously mess with you by guessing the "random" numbers. - * - * Exported interfaces ---- input - * ============================== - * - * The current exported interfaces for gathering environmental noise - * from the devices are: - * - * void add_device_randomness(const void *buf, size_t size); - * void add_input_randomness(unsigned int type, unsigned int code, - * unsigned int value); - * void add_interrupt_randomness(int irq); - * void add_disk_randomness(struct gendisk *disk); - * void add_hwgenerator_randomness(const void *buffer, size_t count, - * size_t entropy); - * void add_bootloader_randomness(const void *buf, size_t size); - * - * add_device_randomness() is for adding data to the random pool that - * is likely to differ between two devices (or possibly even per boot). - * This would be things like MAC addresses or serial numbers, or the - * read-out of the RTC. This does *not* add any actual entropy to the - * pool, but it initializes the pool to different values for devices - * that might otherwise be identical and have very little entropy - * available to them (particularly common in the embedded world). - * - * add_input_randomness() uses the input layer interrupt timing, as well as - * the event type information from the hardware. - * - * add_interrupt_randomness() uses the interrupt timing as random - * inputs to the entropy pool. Using the cycle counters and the irq source - * as inputs, it feeds the randomness roughly once a second. - * - * add_disk_randomness() uses what amounts to the seek time of block - * layer request events, on a per-disk_devt basis, as input to the - * entropy pool. Note that high-speed solid state drives with very low - * seek times do not make for good sources of entropy, as their seek - * times are usually fairly consistent. - * - * All of these routines try to estimate how many bits of randomness a - * particular randomness source. They do this by keeping track of the - * first and second order deltas of the event timings. - * - * add_hwgenerator_randomness() is for true hardware RNGs, and will credit - * entropy as specified by the caller. If the entropy pool is full it will - * block until more entropy is needed. - * - * add_bootloader_randomness() is the same as add_hwgenerator_randomness() or - * add_device_randomness(), depending on whether or not the configuration - * option CONFIG_RANDOM_TRUST_BOOTLOADER is set. - * - * Ensuring unpredictability at system startup - * ============================================ - * - * When any operating system starts up, it will go through a sequence - * of actions that are fairly predictable by an adversary, especially - * if the start-up does not involve interaction with a human operator. - * This reduces the actual number of bits of unpredictability in the - * entropy pool below the value in entropy_count. In order to - * counteract this effect, it helps to carry information in the - * entropy pool across shut-downs and start-ups. To do this, put the - * following lines an appropriate script which is run during the boot - * sequence: - * - * echo "Initializing random number generator..." - * random_seed=/var/run/random-seed - * # Carry a random seed from start-up to start-up - * # Load and then save the whole entropy pool - * if [ -f $random_seed ]; then - * cat $random_seed >/dev/urandom - * else - * touch $random_seed - * fi - * chmod 600 $random_seed - * dd if=/dev/urandom of=$random_seed count=1 bs=512 - * - * and the following lines in an appropriate script which is run as - * the system is shutdown: - * - * # Carry a random seed from shut-down to start-up - * # Save the whole entropy pool - * echo "Saving random seed..." - * random_seed=/var/run/random-seed - * touch $random_seed - * chmod 600 $random_seed - * dd if=/dev/urandom of=$random_seed count=1 bs=512 - * - * For example, on most modern systems using the System V init - * scripts, such code fragments would be found in - * /etc/rc.d/init.d/random. On older Linux systems, the correct script - * location might be in /etc/rcb.d/rc.local or /etc/rc.d/rc.0. - * - * Effectively, these commands cause the contents of the entropy pool - * to be saved at shut-down time and reloaded into the entropy pool at - * start-up. (The 'dd' in the addition to the bootup script is to - * make sure that /etc/random-seed is different for every start-up, - * even if the system crashes without executing rc.0.) Even with - * complete knowledge of the start-up activities, predicting the state - * of the entropy pool requires knowledge of the previous history of - * the system. - * - * Configuring the /dev/random driver under Linux - * ============================================== - * - * The /dev/random driver under Linux uses minor numbers 8 and 9 of - * the /dev/mem major number (#1). So if your system does not have - * /dev/random and /dev/urandom created already, they can be created - * by using the commands: - * - * mknod /dev/random c 1 8 - * mknod /dev/urandom c 1 9 + * Copyright Theodore Ts'o, 1994, 1995, 1996, 1997, 1998, 1999. All rights reserved. + * + * This driver produces cryptographically secure pseudorandom data. It is divided + * into roughly six sections, each with a section header: + * + * - Initialization and readiness waiting. + * - Fast key erasure RNG, the "crng". + * - Entropy accumulation and extraction routines. + * - Entropy collection routines. + * - Userspace reader/writer interfaces. + * - Sysctl interface. + * + * The high level overview is that there is one input pool, into which + * various pieces of data are hashed. Some of that data is then "credited" as + * having a certain number of bits of entropy. When enough bits of entropy are + * available, the hash is finalized and handed as a key to a stream cipher that + * expands it indefinitely for various consumers. This key is periodically + * refreshed as the various entropy collectors, described below, add data to the + * input pool and credit it. There is currently no Fortuna-like scheduler + * involved, which can lead to malicious entropy sources causing a premature + * reseed, and the entropy estimates are, at best, conservative guesses. */
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt