From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs.
Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other.
See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).
Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c index e1c34e1..3ddb956 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c @@ -500,17 +500,15 @@ enum { SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK, CRX0_MARK, CRX1_MARK, CTX0_MARK, CTX1_MARK, + CRX0_CRX1_MARK, CTX0_CTX1_MARK,
PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK, PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK, PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK, PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK, IERXD_MARK, IETXD_MARK, - CRX0_CRX1_MARK, WDTOVF_MARK,
- CRX0X1_MARK, - /* DMAC */ TEND0_MARK, DACK0_MARK, DREQ0_MARK, TEND1_MARK, DACK1_MARK, DREQ1_MARK, @@ -998,12 +996,12 @@ enum {
PINMUX_DATA(PJ3_DATA, PJ3MD_00), PINMUX_DATA(CRX1_MARK, PJ3MD_01), - PINMUX_DATA(CRX0X1_MARK, PJ3MD_10), + PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10), PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),
PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(CTX1_MARK, PJ2MD_001), - PINMUX_DATA(CRX0_CRX1_MARK, PJ2MD_010), + PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010), PINMUX_DATA(CS2_MARK, PJ2MD_011), PINMUX_DATA(SCK0_MARK, PJ2MD_100), PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101), @@ -1248,6 +1246,7 @@ enum { GPIO_FN(CTX1), GPIO_FN(CRX1), GPIO_FN(CTX0), + GPIO_FN(CTX0_CTX1), GPIO_FN(CRX0), GPIO_FN(CRX0_CRX1),