From: Johan Hovold johan@kernel.org
commit 4ca070ef0dd885616ef294d269a9bf8e3b258e1a upstream.
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.
Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning.
Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously used the osif_usb_read() helper and set the IN direction bit.
Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/i2c/busses/i2c-robotfuzz-osif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c index d848cf5152349..3fe21397a4f6b 100644 --- a/drivers/i2c/busses/i2c-robotfuzz-osif.c +++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c @@ -86,7 +86,7 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, } }
- ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0); + ret = osif_usb_write(adapter, OSIFI2C_STOP, 0, 0, NULL, 0); if (ret) { dev_err(&adapter->dev, "failure sending STOP\n"); return -EREMOTEIO; @@ -156,7 +156,7 @@ static int osif_probe(struct usb_interface *interface, * Set bus frequency. The frequency is: * 120,000,000 / ( 16 + 2 * div * 4^prescale). * Using dev = 52, prescale = 0 give 100KHz */ - ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0, + ret = osif_usb_write(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0, NULL, 0); if (ret) { dev_err(&interface->dev, "failure sending bit rate");