From: Michael Walle michael@walle.cc
stable inclusion from stable-v5.10.150 commit df4f05b35634839b070b4171411880fcb4258b94 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0XA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 04eabc6ac10fda9424606d9a7ab6ab9a5d95350a ]
Commit 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") unknowingly broke the serial output on this board. Before this commit, the pinmux was still configured by the bootloader and the kernel didn't reconfigured it again. This was an oversight by the initial board support where the pinmux for the serial line was never configured by the kernel. But with this commit, the serial line will be reconfigured to the wrong pins. This is especially confusing, because the output still works, but the input doesn't. Presumingly, the input is reconfigured to MPP10, but the output is connected to both MPP11 and MPP5.
Override the pinmux in the board device tree.
Fixes: 327e15428977 ("ARM: dts: kirkwood: consolidate common pinctrl settings") Signed-off-by: Michael Walle michael@walle.cc Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Jialin Zhang zhangjialin11@huawei.com --- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 7b151acb9984..321a40a98ed2 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -10,6 +10,11 @@ chosen {
ocp@f1000000 { pinctrl: pin-controller@10000 { + /* Non-default UART pins */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp4", "mpp5"; + }; + pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo";