From: Paul Burton paulburton@google.com
stable inclusion from stable-5.10.51 commit eb81b5a37dc55e8d8042c81672bf7b0e24ff89e1 bugzilla: 175263 https://gitee.com/openeuler/kernel/issues/I4DT6F
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 upstream.
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that on systems where pid_max is configured higher than PID_MAX_DEFAULT the ftrace record-tgid option doesn't work so well. Any tasks with PIDs higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its highest possible 1<<22 value by default on 64 bit systems this renders the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead, allowing it to cover the full range of PIDs up to the maximum value of PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in memory overhead sounds significant 64 bit systems are presumably best placed to accommodate it, and since tgid_map is only allocated when the record-tgid option is actually used presumably the user would rather it spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y configurations, but these seem unlikely to be systems upon which people are both configuring a large pid_max and running ftrace with record-tgid anyway.
Of note is that we only allocate tgid_map once, the first time that the record-tgid option is enabled. Therefore its size is only set once, to the value of pid_max at the time the record-tgid option is first enabled. If a user increases pid_max after that point, the saved_tgids file will not contain entries for any tasks with pids beyond the earlier value of pid_max.
Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks") Cc: Ingo Molnar mingo@redhat.com Cc: Joel Fernandes joelaf@google.com Cc: stable@vger.kernel.org Signed-off-by: Paul Burton paulburton@google.com [ Fixed comment coding style ] Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
Signed-off-by: Chen Jun chenjun102@huawei.com Acked-by: Weilong Chen chenweilong@huawei.com Signed-off-by: Chen Jun chenjun102@huawei.com --- kernel/trace/trace.c | 63 +++++++++++++++++++++++++++++++++----------- 1 file changed, 47 insertions(+), 16 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 2f05811e339b..ee84891bacfa 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2181,8 +2181,15 @@ void tracing_reset_all_online_cpus(void) } }
+/* + * The tgid_map array maps from pid to tgid; i.e. the value stored at index i + * is the tgid last observed corresponding to pid=i. + */ static int *tgid_map;
+/* The maximum valid index into tgid_map. */ +static size_t tgid_map_max; + #define SAVED_CMDLINES_DEFAULT 128 #define NO_CMDLINE_MAP UINT_MAX static arch_spinlock_t trace_cmdline_lock = __ARCH_SPIN_LOCK_UNLOCKED; @@ -2455,24 +2462,41 @@ void trace_find_cmdline(int pid, char comm[]) preempt_enable(); }
+static int *trace_find_tgid_ptr(int pid) +{ + /* + * Pairs with the smp_store_release in set_tracer_flag() to ensure that + * if we observe a non-NULL tgid_map then we also observe the correct + * tgid_map_max. + */ + int *map = smp_load_acquire(&tgid_map); + + if (unlikely(!map || pid > tgid_map_max)) + return NULL; + + return &map[pid]; +} + int trace_find_tgid(int pid) { - if (unlikely(!tgid_map || !pid || pid > PID_MAX_DEFAULT)) - return 0; + int *ptr = trace_find_tgid_ptr(pid);
- return tgid_map[pid]; + return ptr ? *ptr : 0; }
static int trace_save_tgid(struct task_struct *tsk) { + int *ptr; + /* treat recording of idle task as a success */ if (!tsk->pid) return 1;
- if (unlikely(!tgid_map || tsk->pid > PID_MAX_DEFAULT)) + ptr = trace_find_tgid_ptr(tsk->pid); + if (!ptr) return 0;
- tgid_map[tsk->pid] = tsk->tgid; + *ptr = tsk->tgid; return 1; }
@@ -4847,6 +4871,8 @@ int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set)
int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) { + int *map; + if ((mask == TRACE_ITER_RECORD_TGID) || (mask == TRACE_ITER_RECORD_CMD)) lockdep_assert_held(&event_mutex); @@ -4869,10 +4895,19 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) trace_event_enable_cmd_record(enabled);
if (mask == TRACE_ITER_RECORD_TGID) { - if (!tgid_map) - tgid_map = kvcalloc(PID_MAX_DEFAULT + 1, - sizeof(*tgid_map), - GFP_KERNEL); + if (!tgid_map) { + tgid_map_max = pid_max; + map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), + GFP_KERNEL); + + /* + * Pairs with smp_load_acquire() in + * trace_find_tgid_ptr() to ensure that if it observes + * the tgid_map we just allocated then it also observes + * the corresponding tgid_map_max value. + */ + smp_store_release(&tgid_map, map); + } if (!tgid_map) { tr->trace_flags &= ~TRACE_ITER_RECORD_TGID; return -ENOMEM; @@ -5286,18 +5321,14 @@ static void *saved_tgids_next(struct seq_file *m, void *v, loff_t *pos) { int pid = ++(*pos);
- if (pid > PID_MAX_DEFAULT) - return NULL; - - return &tgid_map[pid]; + return trace_find_tgid_ptr(pid); }
static void *saved_tgids_start(struct seq_file *m, loff_t *pos) { - if (!tgid_map || *pos > PID_MAX_DEFAULT) - return NULL; + int pid = *pos;
- return &tgid_map[*pos]; + return trace_find_tgid_ptr(pid); }
static void saved_tgids_stop(struct seq_file *m, void *v)