From: Qiuxu Zhuo qiuxu.zhuo@intel.com
mainline inclusion from mainline-v5.1-rc1 commit 98f2fc829e3b55a0ff1b82753fc1e10941535cb9 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I47H3V CVE: NA
--------------------------------
Delete the duplicated code from skx_edac.c and rename skx_edac.c to skx_base.c. Update the Makefile to build the skx_edac driver from skx_base.c and skx_common.c.
Add SPDX to skx_base.c and clean out unnecessary #include lines.
[ bp: Drop the license boilerplate - there's an SPDX identifier now. ]
Co-developed-by: Tony Luck tony.luck@intel.com Signed-off-by: Qiuxu Zhuo qiuxu.zhuo@intel.com Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Borislav Petkov bp@suse.de Cc: James Morse james.morse@arm.com Cc: Mauro Carvalho Chehab mchehab@kernel.org Cc: linux-edac linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20190130191519.15393-4-tony.luck@intel.com Signed-off-by: Guoqing Jiang jiangguoqing@kylinos.cn Signed-off-by: Jackie Liu liuyun01@kylinos.cn Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/edac/Makefile | 4 +- drivers/edac/skx_base.c | 650 +++++++++++++++++++ drivers/edac/skx_edac.c | 1357 --------------------------------------- 3 files changed, 653 insertions(+), 1358 deletions(-) create mode 100644 drivers/edac/skx_base.c delete mode 100644 drivers/edac/skx_edac.c
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 02b43a7d8c3e..b250d59910ba 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_EDAC_I5400) += i5400_edac.o obj-$(CONFIG_EDAC_I7300) += i7300_edac.o obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o obj-$(CONFIG_EDAC_SBRIDGE) += sb_edac.o -obj-$(CONFIG_EDAC_SKX) += skx_edac.o obj-$(CONFIG_EDAC_PND2) += pnd2_edac.o obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o obj-$(CONFIG_EDAC_E752X) += e752x_edac.o @@ -58,6 +57,9 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o
+skx_edac-y := skx_common.o skx_base.o +obj-$(CONFIG_EDAC_SKX) += skx_edac.o + obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c new file mode 100644 index 000000000000..adae4c848ca1 --- /dev/null +++ b/drivers/edac/skx_base.c @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * EDAC driver for Intel(R) Xeon(R) Skylake processors + * Copyright (c) 2016, Intel Corporation. + */ + +#include <linux/kernel.h> +#include <linux/processor.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/mce.h> + +#include "edac_module.h" +#include "skx_common.h" + +#define EDAC_MOD_STR "skx_edac" + +/* + * Debug macros + */ +#define skx_printk(level, fmt, arg...) \ + edac_printk(level, "skx", fmt, ##arg) + +#define skx_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg) + +static struct list_head *skx_edac_list; + +static u64 skx_tolm, skx_tohm; +static int skx_num_sockets; +static unsigned int nvdimm_count; + +#define MASK26 0x3FFFFFF /* Mask for 2^26 */ +#define MASK29 0x1FFFFFFF /* Mask for 2^29 */ + +static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx) +{ + struct skx_dev *d; + + list_for_each_entry(d, skx_edac_list, list) { + if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number) + return d; + } + + return NULL; +} + +enum munittype { + CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD +}; + +struct munit { + u16 did; + u16 devfn[SKX_NUM_IMC]; + u8 busidx; + u8 per_socket; + enum munittype mtype; +}; + +/* + * List of PCI device ids that we need together with some device + * number and function numbers to tell which memory controller the + * device belongs to. + */ +static const struct munit skx_all_munits[] = { + { 0x2054, { }, 1, 1, SAD_ALL }, + { 0x2055, { }, 1, 1, UTIL_ALL }, + { 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 }, + { 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 }, + { 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 }, + { 0x208e, { }, 1, 0, SAD }, + { } +}; + +static int get_all_munits(const struct munit *m) +{ + struct pci_dev *pdev, *prev; + struct skx_dev *d; + u32 reg; + int i = 0, ndev = 0; + + prev = NULL; + for (;;) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev); + if (!pdev) + break; + ndev++; + if (m->per_socket == SKX_NUM_IMC) { + for (i = 0; i < SKX_NUM_IMC; i++) + if (m->devfn[i] == pdev->devfn) + break; + if (i == SKX_NUM_IMC) + goto fail; + } + d = get_skx_dev(pdev->bus, m->busidx); + if (!d) + goto fail; + + /* Be sure that the device is enabled */ + if (unlikely(pci_enable_device(pdev) < 0)) { + skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n", + PCI_VENDOR_ID_INTEL, m->did); + goto fail; + } + + switch (m->mtype) { + case CHAN0: case CHAN1: case CHAN2: + pci_dev_get(pdev); + d->imc[i].chan[m->mtype].cdev = pdev; + break; + case SAD_ALL: + pci_dev_get(pdev); + d->sad_all = pdev; + break; + case UTIL_ALL: + pci_dev_get(pdev); + d->util_all = pdev; + break; + case SAD: + /* + * one of these devices per core, including cores + * that don't exist on this SKU. Ignore any that + * read a route table of zero, make sure all the + * non-zero values match. + */ + pci_read_config_dword(pdev, 0xB4, ®); + if (reg != 0) { + if (d->mcroute == 0) { + d->mcroute = reg; + } else if (d->mcroute != reg) { + skx_printk(KERN_ERR, "mcroute mismatch\n"); + goto fail; + } + } + ndev--; + break; + } + + prev = pdev; + } + + return ndev; +fail: + pci_dev_put(pdev); + return -ENODEV; +} + +static const struct x86_cpu_id skx_cpuids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 }, + { } +}; +MODULE_DEVICE_TABLE(x86cpu, skx_cpuids); + +#define SKX_GET_MTMTR(dev, reg) \ + pci_read_config_dword((dev), 0x87c, &(reg)) + +static bool skx_check_ecc(struct pci_dev *pdev) +{ + u32 mtmtr; + + SKX_GET_MTMTR(pdev, mtmtr); + + return !!GET_BITFIELD(mtmtr, 2, 2); +} + +static int skx_get_dimm_config(struct mem_ctl_info *mci) +{ + struct skx_pvt *pvt = mci->pvt_info; + struct skx_imc *imc = pvt->imc; + u32 mtr, amap, mcddrtcfg; + struct dimm_info *dimm; + int i, j; + int ndimms; + + for (i = 0; i < SKX_NUM_CHANNELS; i++) { + ndimms = 0; + pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap); + pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg); + for (j = 0; j < SKX_NUM_DIMMS; j++) { + dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, + mci->n_layers, i, j, 0); + pci_read_config_dword(imc->chan[i].cdev, + 0x80 + 4 * j, &mtr); + if (IS_DIMM_PRESENT(mtr)) { + ndimms += skx_get_dimm_info(mtr, amap, dimm, imc, i, j); + } else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) { + ndimms += skx_get_nvdimm_info(dimm, imc, i, j, + EDAC_MOD_STR); + nvdimm_count++; + } + } + if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) { + skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc); + return -ENODEV; + } + } + + return 0; +} + +#define SKX_MAX_SAD 24 + +#define SKX_GET_SAD(d, i, reg) \ + pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &(reg)) +#define SKX_GET_ILV(d, i, reg) \ + pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &(reg)) + +#define SKX_SAD_MOD3MODE(sad) GET_BITFIELD((sad), 30, 31) +#define SKX_SAD_MOD3(sad) GET_BITFIELD((sad), 27, 27) +#define SKX_SAD_LIMIT(sad) (((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26) +#define SKX_SAD_MOD3ASMOD2(sad) GET_BITFIELD((sad), 5, 6) +#define SKX_SAD_ATTR(sad) GET_BITFIELD((sad), 3, 4) +#define SKX_SAD_INTERLEAVE(sad) GET_BITFIELD((sad), 1, 2) +#define SKX_SAD_ENABLE(sad) GET_BITFIELD((sad), 0, 0) + +#define SKX_ILV_REMOTE(tgt) (((tgt) & 8) == 0) +#define SKX_ILV_TARGET(tgt) ((tgt) & 7) + +static bool skx_sad_decode(struct decoded_addr *res) +{ + struct skx_dev *d = list_first_entry(skx_edac_list, typeof(*d), list); + u64 addr = res->addr; + int i, idx, tgt, lchan, shift; + u32 sad, ilv; + u64 limit, prev_limit; + int remote = 0; + + /* Simple sanity check for I/O space or out of range */ + if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) { + edac_dbg(0, "Address 0x%llx out of range\n", addr); + return false; + } + +restart: + prev_limit = 0; + for (i = 0; i < SKX_MAX_SAD; i++) { + SKX_GET_SAD(d, i, sad); + limit = SKX_SAD_LIMIT(sad); + if (SKX_SAD_ENABLE(sad)) { + if (addr >= prev_limit && addr <= limit) + goto sad_found; + } + prev_limit = limit + 1; + } + edac_dbg(0, "No SAD entry for 0x%llx\n", addr); + return false; + +sad_found: + SKX_GET_ILV(d, i, ilv); + + switch (SKX_SAD_INTERLEAVE(sad)) { + case 0: + idx = GET_BITFIELD(addr, 6, 8); + break; + case 1: + idx = GET_BITFIELD(addr, 8, 10); + break; + case 2: + idx = GET_BITFIELD(addr, 12, 14); + break; + case 3: + idx = GET_BITFIELD(addr, 30, 32); + break; + } + + tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3); + + /* If point to another node, find it and start over */ + if (SKX_ILV_REMOTE(tgt)) { + if (remote) { + edac_dbg(0, "Double remote!\n"); + return false; + } + remote = 1; + list_for_each_entry(d, skx_edac_list, list) { + if (d->imc[0].src_id == SKX_ILV_TARGET(tgt)) + goto restart; + } + edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt)); + return false; + } + + if (SKX_SAD_MOD3(sad) == 0) { + lchan = SKX_ILV_TARGET(tgt); + } else { + switch (SKX_SAD_MOD3MODE(sad)) { + case 0: + shift = 6; + break; + case 1: + shift = 8; + break; + case 2: + shift = 12; + break; + default: + edac_dbg(0, "illegal mod3mode\n"); + return false; + } + switch (SKX_SAD_MOD3ASMOD2(sad)) { + case 0: + lchan = (addr >> shift) % 3; + break; + case 1: + lchan = (addr >> shift) % 2; + break; + case 2: + lchan = (addr >> shift) % 2; + lchan = (lchan << 1) | !lchan; + break; + case 3: + lchan = ((addr >> shift) % 2) << 1; + break; + } + lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1); + } + + res->dev = d; + res->socket = d->imc[0].src_id; + res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2); + res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19); + + edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n", + res->addr, res->socket, res->imc, res->channel); + return true; +} + +#define SKX_MAX_TAD 8 + +#define SKX_GET_TADBASE(d, mc, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &(reg)) +#define SKX_GET_TADWAYNESS(d, mc, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &(reg)) +#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &(reg)) + +#define SKX_TAD_BASE(b) ((u64)GET_BITFIELD((b), 12, 31) << 26) +#define SKX_TAD_SKT_GRAN(b) GET_BITFIELD((b), 4, 5) +#define SKX_TAD_CHN_GRAN(b) GET_BITFIELD((b), 6, 7) +#define SKX_TAD_LIMIT(b) (((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26) +#define SKX_TAD_OFFSET(b) ((u64)GET_BITFIELD((b), 4, 23) << 26) +#define SKX_TAD_SKTWAYS(b) (1 << GET_BITFIELD((b), 10, 11)) +#define SKX_TAD_CHNWAYS(b) (GET_BITFIELD((b), 8, 9) + 1) + +/* which bit used for both socket and channel interleave */ +static int skx_granularity[] = { 6, 8, 12, 30 }; + +static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits) +{ + addr >>= shift; + addr /= ways; + addr <<= shift; + + return addr | (lowbits & ((1ull << shift) - 1)); +} + +static bool skx_tad_decode(struct decoded_addr *res) +{ + int i; + u32 base, wayness, chnilvoffset; + int skt_interleave_bit, chn_interleave_bit; + u64 channel_addr; + + for (i = 0; i < SKX_MAX_TAD; i++) { + SKX_GET_TADBASE(res->dev, res->imc, i, base); + SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness); + if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness)) + goto tad_found; + } + edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr); + return false; + +tad_found: + res->sktways = SKX_TAD_SKTWAYS(wayness); + res->chanways = SKX_TAD_CHNWAYS(wayness); + skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)]; + chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)]; + + SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset); + channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset); + + if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) { + /* Must handle channel first, then socket */ + channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit, + res->chanways, channel_addr); + channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit, + res->sktways, channel_addr); + } else { + /* Handle socket then channel. Preserve low bits from original address */ + channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit, + res->sktways, res->addr); + channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit, + res->chanways, res->addr); + } + + res->chan_addr = channel_addr; + + edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n", + res->addr, res->chan_addr, res->sktways, res->chanways); + return true; +} + +#define SKX_MAX_RIR 4 + +#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \ + 0x108 + 4 * (i), &(reg)) +#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \ + 0x120 + 16 * (idx) + 4 * (i), &(reg)) + +#define SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31) +#define SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29) +#define SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29)) +#define SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19) +#define SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26)) + +static bool skx_rir_decode(struct decoded_addr *res) +{ + int i, idx, chan_rank; + int shift; + u32 rirway, rirlv; + u64 rank_addr, prev_limit = 0, limit; + + if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg) + shift = 6; + else + shift = 13; + + for (i = 0; i < SKX_MAX_RIR; i++) { + SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway); + limit = SKX_RIR_LIMIT(rirway); + if (SKX_RIR_VALID(rirway)) { + if (prev_limit <= res->chan_addr && + res->chan_addr <= limit) + goto rir_found; + } + prev_limit = limit; + } + edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr); + return false; + +rir_found: + rank_addr = res->chan_addr >> shift; + rank_addr /= SKX_RIR_WAYS(rirway); + rank_addr <<= shift; + rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0); + + res->rank_address = rank_addr; + idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway); + + SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv); + res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv); + chan_rank = SKX_RIR_CHAN_RANK(rirlv); + res->channel_rank = chan_rank; + res->dimm = chan_rank / 4; + res->rank = chan_rank % 4; + + edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n", + res->addr, res->dimm, res->rank, + res->channel_rank, res->rank_address); + return true; +} + +static u8 skx_close_row[] = { + 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33 +}; + +static u8 skx_close_column[] = { + 3, 4, 5, 14, 19, 23, 24, 25, 26, 27 +}; + +static u8 skx_open_row[] = { + 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33 +}; + +static u8 skx_open_column[] = { + 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 +}; + +static u8 skx_open_fine_column[] = { + 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 +}; + +static int skx_bits(u64 addr, int nbits, u8 *bits) +{ + int i, res = 0; + + for (i = 0; i < nbits; i++) + res |= ((addr >> bits[i]) & 1) << i; + return res; +} + +static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1) +{ + int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1); + + if (do_xor) + ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1); + + return ret; +} + +static bool skx_mad_decode(struct decoded_addr *r) +{ + struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm]; + int bg0 = dimm->fine_grain_bank ? 6 : 13; + + if (dimm->close_pg) { + r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row); + r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column); + r->column |= 0x400; /* C10 is autoprecharge, always set */ + r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28); + r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21); + } else { + r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row); + if (dimm->fine_grain_bank) + r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column); + else + r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column); + r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23); + r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21); + } + r->row &= (1u << dimm->rowbits) - 1; + + edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n", + r->addr, r->row, r->column, r->bank_address, + r->bank_group); + return true; +} + +static bool skx_decode(struct decoded_addr *res) +{ + return skx_sad_decode(res) && skx_tad_decode(res) && + skx_rir_decode(res) && skx_mad_decode(res); +} + +static struct notifier_block skx_mce_dec = { + .notifier_call = skx_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +/* + * skx_init: + * make sure we are running on the correct cpu model + * search for all the devices we need + * check which DIMMs are present. + */ +static int __init skx_init(void) +{ + const struct x86_cpu_id *id; + const struct munit *m; + const char *owner; + int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8}; + u8 mc = 0, src_id, node_id; + struct skx_dev *d; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + id = x86_match_cpu(skx_cpuids); + if (!id) + return -ENODEV; + + rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm); + if (rc) + return rc; + + rc = skx_get_all_bus_mappings(0x2016, 0xcc, SKX, &skx_edac_list); + if (rc < 0) + goto fail; + if (rc == 0) { + edac_dbg(2, "No memory controllers found\n"); + return -ENODEV; + } + skx_num_sockets = rc; + + for (m = skx_all_munits; m->did; m++) { + rc = get_all_munits(m); + if (rc < 0) + goto fail; + if (rc != m->per_socket * skx_num_sockets) { + edac_dbg(2, "Expected %d, got %d of 0x%x\n", + m->per_socket * skx_num_sockets, rc, m->did); + rc = -ENODEV; + goto fail; + } + } + + list_for_each_entry(d, skx_edac_list, list) { + rc = skx_get_src_id(d, &src_id); + if (rc < 0) + goto fail; + rc = skx_get_node_id(d, &node_id); + if (rc < 0) + goto fail; + edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id); + for (i = 0; i < SKX_NUM_IMC; i++) { + d->imc[i].mc = mc++; + d->imc[i].lmc = i; + d->imc[i].src_id = src_id; + d->imc[i].node_id = node_id; + rc = skx_register_mci(&d->imc[i], d->imc[i].chan[0].cdev, + "Skylake Socket", EDAC_MOD_STR, + skx_get_dimm_config); + if (rc < 0) + goto fail; + } + } + + skx_set_decode(skx_decode); + + if (nvdimm_count && skx_adxl_get() == -ENODEV) + skx_printk(KERN_NOTICE, "Only decoding DDR4 address!\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + setup_skx_debug("skx_test"); + + mce_register_decode_chain(&skx_mce_dec); + + return 0; +fail: + skx_remove(); + return rc; +} + +static void __exit skx_exit(void) +{ + edac_dbg(2, "\n"); + mce_unregister_decode_chain(&skx_mce_dec); + teardown_skx_debug(); + if (nvdimm_count) + skx_adxl_put(); + skx_remove(); +} + +module_init(skx_init); +module_exit(skx_exit); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Tony Luck"); +MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors"); diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c deleted file mode 100644 index a99ea61dad32..000000000000 --- a/drivers/edac/skx_edac.c +++ /dev/null @@ -1,1357 +0,0 @@ -/* - * EDAC driver for Intel(R) Xeon(R) Skylake processors - * Copyright (c) 2016, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/acpi.h> -#include <linux/dmi.h> -#include <linux/pci.h> -#include <linux/pci_ids.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/edac.h> -#include <linux/mmzone.h> -#include <linux/smp.h> -#include <linux/bitmap.h> -#include <linux/math64.h> -#include <linux/mod_devicetable.h> -#include <linux/adxl.h> -#include <acpi/nfit.h> -#include <asm/cpu_device_id.h> -#include <asm/intel-family.h> -#include <asm/processor.h> -#include <asm/mce.h> - -#include "edac_module.h" - -#define EDAC_MOD_STR "skx_edac" -#define MSG_SIZE 1024 - -/* - * Debug macros - */ -#define skx_printk(level, fmt, arg...) \ - edac_printk(level, "skx", fmt, ##arg) - -#define skx_mc_printk(mci, level, fmt, arg...) \ - edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg) - -/* - * Get a bit field at register value <v>, from bit <lo> to bit <hi> - */ -#define GET_BITFIELD(v, lo, hi) \ - (((v) & GENMASK_ULL((hi), (lo))) >> (lo)) - -static LIST_HEAD(skx_edac_list); - -static u64 skx_tolm, skx_tohm; -static char *skx_msg; -static unsigned int nvdimm_count; - -enum { - INDEX_SOCKET, - INDEX_MEMCTRL, - INDEX_CHANNEL, - INDEX_DIMM, - INDEX_MAX -}; - -static const char * const component_names[] = { - [INDEX_SOCKET] = "ProcessorSocketId", - [INDEX_MEMCTRL] = "MemoryControllerId", - [INDEX_CHANNEL] = "ChannelId", - [INDEX_DIMM] = "DimmSlotId", -}; - -static int component_indices[ARRAY_SIZE(component_names)]; -static int adxl_component_count; -static const char * const *adxl_component_names; -static u64 *adxl_values; -static char *adxl_msg; - -#define NUM_IMC 2 /* memory controllers per socket */ -#define NUM_CHANNELS 3 /* channels per memory controller */ -#define NUM_DIMMS 2 /* Max DIMMS per channel */ - -#define MASK26 0x3FFFFFF /* Mask for 2^26 */ -#define MASK29 0x1FFFFFFF /* Mask for 2^29 */ - -/* - * Each cpu socket contains some pci devices that provide global - * information, and also some that are local to each of the two - * memory controllers on the die. - */ -struct skx_dev { - struct list_head list; - u8 bus[4]; - int seg; - struct pci_dev *sad_all; - struct pci_dev *util_all; - u32 mcroute; - struct skx_imc { - struct mem_ctl_info *mci; - u8 mc; /* system wide mc# */ - u8 lmc; /* socket relative mc# */ - u8 src_id, node_id; - struct skx_channel { - struct pci_dev *cdev; - struct skx_dimm { - u8 close_pg; - u8 bank_xor_enable; - u8 fine_grain_bank; - u8 rowbits; - u8 colbits; - } dimms[NUM_DIMMS]; - } chan[NUM_CHANNELS]; - } imc[NUM_IMC]; -}; -static int skx_num_sockets; - -struct skx_pvt { - struct skx_imc *imc; -}; - -struct decoded_addr { - struct skx_dev *dev; - u64 addr; - int socket; - int imc; - int channel; - u64 chan_addr; - int sktways; - int chanways; - int dimm; - int rank; - int channel_rank; - u64 rank_address; - int row; - int column; - int bank_address; - int bank_group; -}; - -static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx) -{ - struct skx_dev *d; - - list_for_each_entry(d, &skx_edac_list, list) { - if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number) - return d; - } - - return NULL; -} - -enum munittype { - CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD -}; - -struct munit { - u16 did; - u16 devfn[NUM_IMC]; - u8 busidx; - u8 per_socket; - enum munittype mtype; -}; - -/* - * List of PCI device ids that we need together with some device - * number and function numbers to tell which memory controller the - * device belongs to. - */ -static const struct munit skx_all_munits[] = { - { 0x2054, { }, 1, 1, SAD_ALL }, - { 0x2055, { }, 1, 1, UTIL_ALL }, - { 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 }, - { 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 }, - { 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 }, - { 0x208e, { }, 1, 0, SAD }, - { } -}; - -/* - * We use the per-socket device 0x2016 to count how many sockets are present, - * and to detemine which PCI buses are associated with each socket. Allocate - * and build the full list of all the skx_dev structures that we need here. - */ -static int get_all_bus_mappings(void) -{ - struct pci_dev *pdev, *prev; - struct skx_dev *d; - u32 reg; - int ndev = 0; - - prev = NULL; - for (;;) { - pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2016, prev); - if (!pdev) - break; - ndev++; - d = kzalloc(sizeof(*d), GFP_KERNEL); - if (!d) { - pci_dev_put(pdev); - return -ENOMEM; - } - d->seg = pci_domain_nr(pdev->bus); - pci_read_config_dword(pdev, 0xCC, ®); - d->bus[0] = GET_BITFIELD(reg, 0, 7); - d->bus[1] = GET_BITFIELD(reg, 8, 15); - d->bus[2] = GET_BITFIELD(reg, 16, 23); - d->bus[3] = GET_BITFIELD(reg, 24, 31); - edac_dbg(2, "busses: %x, %x, %x, %x\n", - d->bus[0], d->bus[1], d->bus[2], d->bus[3]); - list_add_tail(&d->list, &skx_edac_list); - skx_num_sockets++; - prev = pdev; - } - - return ndev; -} - -static int get_all_munits(const struct munit *m) -{ - struct pci_dev *pdev, *prev; - struct skx_dev *d; - u32 reg; - int i = 0, ndev = 0; - - prev = NULL; - for (;;) { - pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev); - if (!pdev) - break; - ndev++; - if (m->per_socket == NUM_IMC) { - for (i = 0; i < NUM_IMC; i++) - if (m->devfn[i] == pdev->devfn) - break; - if (i == NUM_IMC) - goto fail; - } - d = get_skx_dev(pdev->bus, m->busidx); - if (!d) - goto fail; - - /* Be sure that the device is enabled */ - if (unlikely(pci_enable_device(pdev) < 0)) { - skx_printk(KERN_ERR, - "Couldn't enable %04x:%04x\n", PCI_VENDOR_ID_INTEL, m->did); - goto fail; - } - - switch (m->mtype) { - case CHAN0: case CHAN1: case CHAN2: - pci_dev_get(pdev); - d->imc[i].chan[m->mtype].cdev = pdev; - break; - case SAD_ALL: - pci_dev_get(pdev); - d->sad_all = pdev; - break; - case UTIL_ALL: - pci_dev_get(pdev); - d->util_all = pdev; - break; - case SAD: - /* - * one of these devices per core, including cores - * that don't exist on this SKU. Ignore any that - * read a route table of zero, make sure all the - * non-zero values match. - */ - pci_read_config_dword(pdev, 0xB4, ®); - if (reg != 0) { - if (d->mcroute == 0) - d->mcroute = reg; - else if (d->mcroute != reg) { - skx_printk(KERN_ERR, - "mcroute mismatch\n"); - goto fail; - } - } - ndev--; - break; - } - - prev = pdev; - } - - return ndev; -fail: - pci_dev_put(pdev); - return -ENODEV; -} - -static const struct x86_cpu_id skx_cpuids[] = { - { X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 }, - { } -}; -MODULE_DEVICE_TABLE(x86cpu, skx_cpuids); - -static u8 get_src_id(struct skx_dev *d) -{ - u32 reg; - - pci_read_config_dword(d->util_all, 0xF0, ®); - - return GET_BITFIELD(reg, 12, 14); -} - -static u8 skx_get_node_id(struct skx_dev *d) -{ - u32 reg; - - pci_read_config_dword(d->util_all, 0xF4, ®); - - return GET_BITFIELD(reg, 0, 2); -} - -static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval, - int maxval, char *name) -{ - u32 val = GET_BITFIELD(reg, lobit, hibit); - - if (val < minval || val > maxval) { - edac_dbg(2, "bad %s = %d (raw=%x)\n", name, val, reg); - return -EINVAL; - } - return val + add; -} - -#define IS_DIMM_PRESENT(mtr) GET_BITFIELD((mtr), 15, 15) -#define IS_NVDIMM_PRESENT(mcddrtcfg, i) GET_BITFIELD((mcddrtcfg), (i), (i)) - -#define numrank(reg) get_dimm_attr((reg), 12, 13, 0, 0, 2, "ranks") -#define numrow(reg) get_dimm_attr((reg), 2, 4, 12, 1, 6, "rows") -#define numcol(reg) get_dimm_attr((reg), 0, 1, 10, 0, 2, "cols") - -static int get_width(u32 mtr) -{ - switch (GET_BITFIELD(mtr, 8, 9)) { - case 0: - return DEV_X4; - case 1: - return DEV_X8; - case 2: - return DEV_X16; - } - return DEV_UNKNOWN; -} - -static int skx_get_hi_lo(void) -{ - struct pci_dev *pdev; - u32 reg; - - pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2034, NULL); - if (!pdev) { - edac_dbg(0, "Can't get tolm/tohm\n"); - return -ENODEV; - } - - pci_read_config_dword(pdev, 0xD0, ®); - skx_tolm = reg; - pci_read_config_dword(pdev, 0xD4, ®); - skx_tohm = reg; - pci_read_config_dword(pdev, 0xD8, ®); - skx_tohm |= (u64)reg << 32; - - pci_dev_put(pdev); - edac_dbg(2, "tolm=%llx tohm=%llx\n", skx_tolm, skx_tohm); - - return 0; -} - -static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm, - struct skx_imc *imc, int chan, int dimmno) -{ - int banks = 16, ranks, rows, cols, npages; - u64 size; - - ranks = numrank(mtr); - rows = numrow(mtr); - cols = numcol(mtr); - - /* - * Compute size in 8-byte (2^3) words, then shift to MiB (2^20) - */ - size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3); - npages = MiB_TO_PAGES(size); - - edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", - imc->mc, chan, dimmno, size, npages, - banks, 1 << ranks, rows, cols); - - imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0); - imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9); - imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0); - imc->chan[chan].dimms[dimmno].rowbits = rows; - imc->chan[chan].dimms[dimmno].colbits = cols; - - dimm->nr_pages = npages; - dimm->grain = 32; - dimm->dtype = get_width(mtr); - dimm->mtype = MEM_DDR4; - dimm->edac_mode = EDAC_SECDED; /* likely better than this */ - snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u", - imc->src_id, imc->lmc, chan, dimmno); - - return 1; -} - -static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc, - int chan, int dimmno) -{ - int smbios_handle; - u32 dev_handle; - u16 flags; - u64 size = 0; - - nvdimm_count++; - - dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc, - imc->src_id, 0); - - smbios_handle = nfit_get_smbios_id(dev_handle, &flags); - if (smbios_handle == -EOPNOTSUPP) { - pr_warn_once(EDAC_MOD_STR ": Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n"); - goto unknown_size; - } - - if (smbios_handle < 0) { - skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=%x\n", dev_handle); - goto unknown_size; - } - - if (flags & ACPI_NFIT_MEM_MAP_FAILED) { - skx_printk(KERN_ERR, "NVDIMM ADR=%x is not mapped\n", dev_handle); - goto unknown_size; - } - - size = dmi_memdev_size(smbios_handle); - if (size == ~0ull) - skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=%x/SMBIOS=%x\n", - dev_handle, smbios_handle); - -unknown_size: - dimm->nr_pages = size >> PAGE_SHIFT; - dimm->grain = 32; - dimm->dtype = DEV_UNKNOWN; - dimm->mtype = MEM_NVDIMM; - dimm->edac_mode = EDAC_SECDED; /* likely better than this */ - - edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n", - imc->mc, chan, dimmno, size >> 20, dimm->nr_pages); - - snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u", - imc->src_id, imc->lmc, chan, dimmno); - - return (size == 0 || size == ~0ull) ? 0 : 1; -} - -#define SKX_GET_MTMTR(dev, reg) \ - pci_read_config_dword((dev), 0x87c, ®) - -static bool skx_check_ecc(struct pci_dev *pdev) -{ - u32 mtmtr; - - SKX_GET_MTMTR(pdev, mtmtr); - - return !!GET_BITFIELD(mtmtr, 2, 2); -} - -static int skx_get_dimm_config(struct mem_ctl_info *mci) -{ - struct skx_pvt *pvt = mci->pvt_info; - struct skx_imc *imc = pvt->imc; - u32 mtr, amap, mcddrtcfg; - struct dimm_info *dimm; - int i, j; - int ndimms; - - for (i = 0; i < NUM_CHANNELS; i++) { - ndimms = 0; - pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap); - pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg); - for (j = 0; j < NUM_DIMMS; j++) { - dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, - mci->n_layers, i, j, 0); - pci_read_config_dword(imc->chan[i].cdev, - 0x80 + 4*j, &mtr); - if (IS_DIMM_PRESENT(mtr)) - ndimms += get_dimm_info(mtr, amap, dimm, imc, i, j); - else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) - ndimms += get_nvdimm_info(dimm, imc, i, j); - } - if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) { - skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc); - return -ENODEV; - } - } - - return 0; -} - -static void skx_unregister_mci(struct skx_imc *imc) -{ - struct mem_ctl_info *mci = imc->mci; - - if (!mci) - return; - - edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci); - - /* Remove MC sysfs nodes */ - edac_mc_del_mc(mci->pdev); - - edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); - kfree(mci->ctl_name); - edac_mc_free(mci); -} - -static int skx_register_mci(struct skx_imc *imc) -{ - struct mem_ctl_info *mci; - struct edac_mc_layer layers[2]; - struct pci_dev *pdev = imc->chan[0].cdev; - struct skx_pvt *pvt; - int rc; - - /* allocate a new MC control structure */ - layers[0].type = EDAC_MC_LAYER_CHANNEL; - layers[0].size = NUM_CHANNELS; - layers[0].is_virt_csrow = false; - layers[1].type = EDAC_MC_LAYER_SLOT; - layers[1].size = NUM_DIMMS; - layers[1].is_virt_csrow = true; - mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers, - sizeof(struct skx_pvt)); - - if (unlikely(!mci)) - return -ENOMEM; - - edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci); - - /* Associate skx_dev and mci for future usage */ - imc->mci = mci; - pvt = mci->pvt_info; - pvt->imc = imc; - - mci->ctl_name = kasprintf(GFP_KERNEL, "Skylake Socket#%d IMC#%d", - imc->node_id, imc->lmc); - if (!mci->ctl_name) { - rc = -ENOMEM; - goto fail0; - } - - mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM; - mci->edac_ctl_cap = EDAC_FLAG_NONE; - mci->edac_cap = EDAC_FLAG_NONE; - mci->mod_name = EDAC_MOD_STR; - mci->dev_name = pci_name(imc->chan[0].cdev); - mci->ctl_page_to_phys = NULL; - - rc = skx_get_dimm_config(mci); - if (rc < 0) - goto fail; - - /* record ptr to the generic device */ - mci->pdev = &pdev->dev; - - /* add this new MC control structure to EDAC's list of MCs */ - if (unlikely(edac_mc_add_mc(mci))) { - edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); - rc = -EINVAL; - goto fail; - } - - return 0; - -fail: - kfree(mci->ctl_name); -fail0: - edac_mc_free(mci); - imc->mci = NULL; - return rc; -} - -#define SKX_MAX_SAD 24 - -#define SKX_GET_SAD(d, i, reg) \ - pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), ®) -#define SKX_GET_ILV(d, i, reg) \ - pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), ®) - -#define SKX_SAD_MOD3MODE(sad) GET_BITFIELD((sad), 30, 31) -#define SKX_SAD_MOD3(sad) GET_BITFIELD((sad), 27, 27) -#define SKX_SAD_LIMIT(sad) (((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26) -#define SKX_SAD_MOD3ASMOD2(sad) GET_BITFIELD((sad), 5, 6) -#define SKX_SAD_ATTR(sad) GET_BITFIELD((sad), 3, 4) -#define SKX_SAD_INTERLEAVE(sad) GET_BITFIELD((sad), 1, 2) -#define SKX_SAD_ENABLE(sad) GET_BITFIELD((sad), 0, 0) - -#define SKX_ILV_REMOTE(tgt) (((tgt) & 8) == 0) -#define SKX_ILV_TARGET(tgt) ((tgt) & 7) - -static bool skx_sad_decode(struct decoded_addr *res) -{ - struct skx_dev *d = list_first_entry(&skx_edac_list, typeof(*d), list); - u64 addr = res->addr; - int i, idx, tgt, lchan, shift; - u32 sad, ilv; - u64 limit, prev_limit; - int remote = 0; - - /* Simple sanity check for I/O space or out of range */ - if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) { - edac_dbg(0, "Address %llx out of range\n", addr); - return false; - } - -restart: - prev_limit = 0; - for (i = 0; i < SKX_MAX_SAD; i++) { - SKX_GET_SAD(d, i, sad); - limit = SKX_SAD_LIMIT(sad); - if (SKX_SAD_ENABLE(sad)) { - if (addr >= prev_limit && addr <= limit) - goto sad_found; - } - prev_limit = limit + 1; - } - edac_dbg(0, "No SAD entry for %llx\n", addr); - return false; - -sad_found: - SKX_GET_ILV(d, i, ilv); - - switch (SKX_SAD_INTERLEAVE(sad)) { - case 0: - idx = GET_BITFIELD(addr, 6, 8); - break; - case 1: - idx = GET_BITFIELD(addr, 8, 10); - break; - case 2: - idx = GET_BITFIELD(addr, 12, 14); - break; - case 3: - idx = GET_BITFIELD(addr, 30, 32); - break; - } - - tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3); - - /* If point to another node, find it and start over */ - if (SKX_ILV_REMOTE(tgt)) { - if (remote) { - edac_dbg(0, "Double remote!\n"); - return false; - } - remote = 1; - list_for_each_entry(d, &skx_edac_list, list) { - if (d->imc[0].src_id == SKX_ILV_TARGET(tgt)) - goto restart; - } - edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt)); - return false; - } - - if (SKX_SAD_MOD3(sad) == 0) - lchan = SKX_ILV_TARGET(tgt); - else { - switch (SKX_SAD_MOD3MODE(sad)) { - case 0: - shift = 6; - break; - case 1: - shift = 8; - break; - case 2: - shift = 12; - break; - default: - edac_dbg(0, "illegal mod3mode\n"); - return false; - } - switch (SKX_SAD_MOD3ASMOD2(sad)) { - case 0: - lchan = (addr >> shift) % 3; - break; - case 1: - lchan = (addr >> shift) % 2; - break; - case 2: - lchan = (addr >> shift) % 2; - lchan = (lchan << 1) | !lchan; - break; - case 3: - lchan = ((addr >> shift) % 2) << 1; - break; - } - lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1); - } - - res->dev = d; - res->socket = d->imc[0].src_id; - res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2); - res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19); - - edac_dbg(2, "%llx: socket=%d imc=%d channel=%d\n", - res->addr, res->socket, res->imc, res->channel); - return true; -} - -#define SKX_MAX_TAD 8 - -#define SKX_GET_TADBASE(d, mc, i, reg) \ - pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), ®) -#define SKX_GET_TADWAYNESS(d, mc, i, reg) \ - pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), ®) -#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg) \ - pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), ®) - -#define SKX_TAD_BASE(b) ((u64)GET_BITFIELD((b), 12, 31) << 26) -#define SKX_TAD_SKT_GRAN(b) GET_BITFIELD((b), 4, 5) -#define SKX_TAD_CHN_GRAN(b) GET_BITFIELD((b), 6, 7) -#define SKX_TAD_LIMIT(b) (((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26) -#define SKX_TAD_OFFSET(b) ((u64)GET_BITFIELD((b), 4, 23) << 26) -#define SKX_TAD_SKTWAYS(b) (1 << GET_BITFIELD((b), 10, 11)) -#define SKX_TAD_CHNWAYS(b) (GET_BITFIELD((b), 8, 9) + 1) - -/* which bit used for both socket and channel interleave */ -static int skx_granularity[] = { 6, 8, 12, 30 }; - -static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits) -{ - addr >>= shift; - addr /= ways; - addr <<= shift; - - return addr | (lowbits & ((1ull << shift) - 1)); -} - -static bool skx_tad_decode(struct decoded_addr *res) -{ - int i; - u32 base, wayness, chnilvoffset; - int skt_interleave_bit, chn_interleave_bit; - u64 channel_addr; - - for (i = 0; i < SKX_MAX_TAD; i++) { - SKX_GET_TADBASE(res->dev, res->imc, i, base); - SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness); - if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness)) - goto tad_found; - } - edac_dbg(0, "No TAD entry for %llx\n", res->addr); - return false; - -tad_found: - res->sktways = SKX_TAD_SKTWAYS(wayness); - res->chanways = SKX_TAD_CHNWAYS(wayness); - skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)]; - chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)]; - - SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset); - channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset); - - if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) { - /* Must handle channel first, then socket */ - channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit, - res->chanways, channel_addr); - channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit, - res->sktways, channel_addr); - } else { - /* Handle socket then channel. Preserve low bits from original address */ - channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit, - res->sktways, res->addr); - channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit, - res->chanways, res->addr); - } - - res->chan_addr = channel_addr; - - edac_dbg(2, "%llx: chan_addr=%llx sktways=%d chanways=%d\n", - res->addr, res->chan_addr, res->sktways, res->chanways); - return true; -} - -#define SKX_MAX_RIR 4 - -#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg) \ - pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \ - 0x108 + 4 * (i), ®) -#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg) \ - pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \ - 0x120 + 16 * idx + 4 * (i), ®) - -#define SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31) -#define SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29) -#define SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29)) -#define SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19) -#define SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26)) - -static bool skx_rir_decode(struct decoded_addr *res) -{ - int i, idx, chan_rank; - int shift; - u32 rirway, rirlv; - u64 rank_addr, prev_limit = 0, limit; - - if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg) - shift = 6; - else - shift = 13; - - for (i = 0; i < SKX_MAX_RIR; i++) { - SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway); - limit = SKX_RIR_LIMIT(rirway); - if (SKX_RIR_VALID(rirway)) { - if (prev_limit <= res->chan_addr && - res->chan_addr <= limit) - goto rir_found; - } - prev_limit = limit; - } - edac_dbg(0, "No RIR entry for %llx\n", res->addr); - return false; - -rir_found: - rank_addr = res->chan_addr >> shift; - rank_addr /= SKX_RIR_WAYS(rirway); - rank_addr <<= shift; - rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0); - - res->rank_address = rank_addr; - idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway); - - SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv); - res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv); - chan_rank = SKX_RIR_CHAN_RANK(rirlv); - res->channel_rank = chan_rank; - res->dimm = chan_rank / 4; - res->rank = chan_rank % 4; - - edac_dbg(2, "%llx: dimm=%d rank=%d chan_rank=%d rank_addr=%llx\n", - res->addr, res->dimm, res->rank, - res->channel_rank, res->rank_address); - return true; -} - -static u8 skx_close_row[] = { - 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33 -}; -static u8 skx_close_column[] = { - 3, 4, 5, 14, 19, 23, 24, 25, 26, 27 -}; -static u8 skx_open_row[] = { - 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33 -}; -static u8 skx_open_column[] = { - 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 -}; -static u8 skx_open_fine_column[] = { - 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 -}; - -static int skx_bits(u64 addr, int nbits, u8 *bits) -{ - int i, res = 0; - - for (i = 0; i < nbits; i++) - res |= ((addr >> bits[i]) & 1) << i; - return res; -} - -static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1) -{ - int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1); - - if (do_xor) - ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1); - - return ret; -} - -static bool skx_mad_decode(struct decoded_addr *r) -{ - struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm]; - int bg0 = dimm->fine_grain_bank ? 6 : 13; - - if (dimm->close_pg) { - r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row); - r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column); - r->column |= 0x400; /* C10 is autoprecharge, always set */ - r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28); - r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21); - } else { - r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row); - if (dimm->fine_grain_bank) - r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column); - else - r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column); - r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23); - r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21); - } - r->row &= (1u << dimm->rowbits) - 1; - - edac_dbg(2, "%llx: row=%x col=%x bank_addr=%d bank_group=%d\n", - r->addr, r->row, r->column, r->bank_address, - r->bank_group); - return true; -} - -static bool skx_decode(struct decoded_addr *res) -{ - - return skx_sad_decode(res) && skx_tad_decode(res) && - skx_rir_decode(res) && skx_mad_decode(res); -} - -#ifdef CONFIG_EDAC_DEBUG -/* - * Debug feature. Make /sys/kernel/debug/skx_edac_test/addr. - * Write an address to this file to exercise the address decode - * logic in this driver. - */ -static struct dentry *skx_test; -static u64 skx_fake_addr; - -static int debugfs_u64_set(void *data, u64 val) -{ - struct decoded_addr res; - - res.addr = val; - skx_decode(&res); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); - -static struct dentry *mydebugfs_create(const char *name, umode_t mode, - struct dentry *parent, u64 *value) -{ - return debugfs_create_file(name, mode, parent, value, &fops_u64_wo); -} - -static void setup_skx_debug(void) -{ - skx_test = debugfs_create_dir("skx_edac_test", NULL); - mydebugfs_create("addr", S_IWUSR, skx_test, &skx_fake_addr); -} - -static void teardown_skx_debug(void) -{ - debugfs_remove_recursive(skx_test); -} -#else -static void setup_skx_debug(void) -{ -} - -static void teardown_skx_debug(void) -{ -} -#endif /*CONFIG_EDAC_DEBUG*/ - -static bool skx_adxl_decode(struct decoded_addr *res) - -{ - int i, len = 0; - - if (res->addr >= skx_tohm || (res->addr >= skx_tolm && - res->addr < BIT_ULL(32))) { - edac_dbg(0, "Address 0x%llx out of range\n", res->addr); - return false; - } - - if (adxl_decode(res->addr, adxl_values)) { - edac_dbg(0, "Failed to decode 0x%llx\n", res->addr); - return false; - } - - res->socket = (int)adxl_values[component_indices[INDEX_SOCKET]]; - res->imc = (int)adxl_values[component_indices[INDEX_MEMCTRL]]; - res->channel = (int)adxl_values[component_indices[INDEX_CHANNEL]]; - res->dimm = (int)adxl_values[component_indices[INDEX_DIMM]]; - - for (i = 0; i < adxl_component_count; i++) { - if (adxl_values[i] == ~0x0ull) - continue; - - len += snprintf(adxl_msg + len, MSG_SIZE - len, " %s:0x%llx", - adxl_component_names[i], adxl_values[i]); - if (MSG_SIZE - len <= 0) - break; - } - - return true; -} - -static void skx_mce_output_error(struct mem_ctl_info *mci, - const struct mce *m, - struct decoded_addr *res) -{ - enum hw_event_mc_err_type tp_event; - char *type, *optype; - bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0); - bool overflow = GET_BITFIELD(m->status, 62, 62); - bool uncorrected_error = GET_BITFIELD(m->status, 61, 61); - bool recoverable; - u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52); - u32 mscod = GET_BITFIELD(m->status, 16, 31); - u32 errcode = GET_BITFIELD(m->status, 0, 15); - u32 optypenum = GET_BITFIELD(m->status, 4, 6); - - recoverable = GET_BITFIELD(m->status, 56, 56); - - if (uncorrected_error) { - core_err_cnt = 1; - if (ripv) { - type = "FATAL"; - tp_event = HW_EVENT_ERR_FATAL; - } else { - type = "NON_FATAL"; - tp_event = HW_EVENT_ERR_UNCORRECTED; - } - } else { - type = "CORRECTED"; - tp_event = HW_EVENT_ERR_CORRECTED; - } - - /* - * According with Table 15-9 of the Intel Architecture spec vol 3A, - * memory errors should fit in this mask: - * 000f 0000 1mmm cccc (binary) - * where: - * f = Correction Report Filtering Bit. If 1, subsequent errors - * won't be shown - * mmm = error type - * cccc = channel - * If the mask doesn't match, report an error to the parsing logic - */ - if (!((errcode & 0xef80) == 0x80)) { - optype = "Can't parse: it is not a mem"; - } else { - switch (optypenum) { - case 0: - optype = "generic undef request error"; - break; - case 1: - optype = "memory read error"; - break; - case 2: - optype = "memory write error"; - break; - case 3: - optype = "addr/cmd error"; - break; - case 4: - optype = "memory scrubbing error"; - break; - default: - optype = "reserved"; - break; - } - } - if (adxl_component_count) { - snprintf(skx_msg, MSG_SIZE, "%s%s err_code:%04x:%04x %s", - overflow ? " OVERFLOW" : "", - (uncorrected_error && recoverable) ? " recoverable" : "", - mscod, errcode, adxl_msg); - } else { - snprintf(skx_msg, MSG_SIZE, - "%s%s err_code:%04x:%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:%x col:%x", - overflow ? " OVERFLOW" : "", - (uncorrected_error && recoverable) ? " recoverable" : "", - mscod, errcode, - res->socket, res->imc, res->rank, - res->bank_group, res->bank_address, res->row, res->column); - } - - edac_dbg(0, "%s\n", skx_msg); - - /* Call the helper to output message */ - edac_mc_handle_error(tp_event, mci, core_err_cnt, - m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, - res->channel, res->dimm, -1, - optype, skx_msg); -} - -static struct mem_ctl_info *get_mci(int src_id, int lmc) -{ - struct skx_dev *d; - - if (lmc > NUM_IMC - 1) { - skx_printk(KERN_ERR, "Bad lmc %d\n", lmc); - return NULL; - } - - list_for_each_entry(d, &skx_edac_list, list) { - if (d->imc[0].src_id == src_id) - return d->imc[lmc].mci; - } - - skx_printk(KERN_ERR, "No mci for src_id %d lmc %d\n", src_id, lmc); - - return NULL; -} - -static int skx_mce_check_error(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct mce *mce = (struct mce *)data; - struct decoded_addr res; - struct mem_ctl_info *mci; - char *type; - - if (edac_get_report_status() == EDAC_REPORTING_DISABLED) - return NOTIFY_DONE; - - /* ignore unless this is memory related with an address */ - if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV)) - return NOTIFY_DONE; - - memset(&res, 0, sizeof(res)); - res.addr = mce->addr; - - if (adxl_component_count) { - if (!skx_adxl_decode(&res)) - return NOTIFY_DONE; - - mci = get_mci(res.socket, res.imc); - } else { - if (!skx_decode(&res)) - return NOTIFY_DONE; - - mci = res.dev->imc[res.imc].mci; - } - - if (!mci) - return NOTIFY_DONE; - - if (mce->mcgstatus & MCG_STATUS_MCIP) - type = "Exception"; - else - type = "Event"; - - skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n"); - - skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx " - "Bank %d: %016Lx\n", mce->extcpu, type, - mce->mcgstatus, mce->bank, mce->status); - skx_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc); - skx_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr); - skx_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc); - - skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET " - "%u APIC %x\n", mce->cpuvendor, mce->cpuid, - mce->time, mce->socketid, mce->apicid); - - skx_mce_output_error(mci, mce, &res); - - return NOTIFY_DONE; -} - -static struct notifier_block skx_mce_dec = { - .notifier_call = skx_mce_check_error, - .priority = MCE_PRIO_EDAC, -}; - -static void skx_remove(void) -{ - int i, j; - struct skx_dev *d, *tmp; - - edac_dbg(0, "\n"); - - list_for_each_entry_safe(d, tmp, &skx_edac_list, list) { - list_del(&d->list); - for (i = 0; i < NUM_IMC; i++) { - skx_unregister_mci(&d->imc[i]); - for (j = 0; j < NUM_CHANNELS; j++) - pci_dev_put(d->imc[i].chan[j].cdev); - } - pci_dev_put(d->util_all); - pci_dev_put(d->sad_all); - - kfree(d); - } -} - -static void __init skx_adxl_get(void) -{ - const char * const *names; - int i, j; - - names = adxl_get_component_names(); - if (!names) { - skx_printk(KERN_NOTICE, "No firmware support for address translation."); - skx_printk(KERN_CONT, " Only decoding DDR4 address!\n"); - return; - } - - for (i = 0; i < INDEX_MAX; i++) { - for (j = 0; names[j]; j++) { - if (!strcmp(component_names[i], names[j])) { - component_indices[i] = j; - break; - } - } - - if (!names[j]) - goto err; - } - - adxl_component_names = names; - while (*names++) - adxl_component_count++; - - adxl_values = kcalloc(adxl_component_count, sizeof(*adxl_values), - GFP_KERNEL); - if (!adxl_values) { - adxl_component_count = 0; - return; - } - - adxl_msg = kzalloc(MSG_SIZE, GFP_KERNEL); - if (!adxl_msg) { - adxl_component_count = 0; - kfree(adxl_values); - } - - return; -err: - skx_printk(KERN_ERR, "'%s' is not matched from DSM parameters: ", - component_names[i]); - for (j = 0; names[j]; j++) - skx_printk(KERN_CONT, "%s ", names[j]); - skx_printk(KERN_CONT, "\n"); -} - -static void __exit skx_adxl_put(void) -{ - kfree(adxl_values); - kfree(adxl_msg); -} - -/* - * skx_init: - * make sure we are running on the correct cpu model - * search for all the devices we need - * check which DIMMs are present. - */ -static int __init skx_init(void) -{ - const struct x86_cpu_id *id; - const struct munit *m; - const char *owner; - int rc = 0, i; - u8 mc = 0, src_id, node_id; - struct skx_dev *d; - - edac_dbg(2, "\n"); - - owner = edac_get_owner(); - if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) - return -EBUSY; - - id = x86_match_cpu(skx_cpuids); - if (!id) - return -ENODEV; - - rc = skx_get_hi_lo(); - if (rc) - return rc; - - rc = get_all_bus_mappings(); - if (rc < 0) - goto fail; - if (rc == 0) { - edac_dbg(2, "No memory controllers found\n"); - return -ENODEV; - } - - for (m = skx_all_munits; m->did; m++) { - rc = get_all_munits(m); - if (rc < 0) - goto fail; - if (rc != m->per_socket * skx_num_sockets) { - edac_dbg(2, "Expected %d, got %d of %x\n", - m->per_socket * skx_num_sockets, rc, m->did); - rc = -ENODEV; - goto fail; - } - } - - list_for_each_entry(d, &skx_edac_list, list) { - src_id = get_src_id(d); - node_id = skx_get_node_id(d); - edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id); - for (i = 0; i < NUM_IMC; i++) { - d->imc[i].mc = mc++; - d->imc[i].lmc = i; - d->imc[i].src_id = src_id; - d->imc[i].node_id = node_id; - rc = skx_register_mci(&d->imc[i]); - if (rc < 0) - goto fail; - } - } - - skx_msg = kzalloc(MSG_SIZE, GFP_KERNEL); - if (!skx_msg) { - rc = -ENOMEM; - goto fail; - } - - if (nvdimm_count) - skx_adxl_get(); - - /* Ensure that the OPSTATE is set correctly for POLL or NMI */ - opstate_init(); - - setup_skx_debug(); - - mce_register_decode_chain(&skx_mce_dec); - - return 0; -fail: - skx_remove(); - return rc; -} - -static void __exit skx_exit(void) -{ - edac_dbg(2, "\n"); - mce_unregister_decode_chain(&skx_mce_dec); - skx_remove(); - if (nvdimm_count) - skx_adxl_put(); - kfree(skx_msg); - teardown_skx_debug(); -} - -module_init(skx_init); -module_exit(skx_exit); - -module_param(edac_op_state, int, 0444); -MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Tony Luck"); -MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");