Reviewed-by: Bamvor Zhang bamvor.zhang@suse.com
在 2/15/22 11:05 AM, Laibin Qiu 写道:
From: Jarkko Sakkinen jarkko@kernel.org
mainline inclusion from mainline-v5.11-rc1 commit 70d3b8ddcd20d3c859676f56c43c7b2360c70266 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4SIGI CVE: NA
Define the SGX architectural data structures used by various SGX functions. This is not an exhaustive representation of all SGX data structures but only those needed by the kernel.
The goal is to sequester hardware structures in "sgx/arch.h" and keep them separate from kernel-internal or uapi structures.
The data structures are described in Intel SDM section 37.6.
Intel-SIG: commit 70d3b8ddcd20 x86/sgx: Add SGX architectural data structures Backport for SGX Foundations support
Signed-off-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Jethro Beekman jethro@fortanix.com Link: https://lkml.kernel.org/r/20201112220135.165028-2-jarkko@kernel.org Signed-off-by: Fan Du fan.du@intel.com #openEuler_contributor Signed-off-by: Laibin Qiu qiulaibin@huawei.com
arch/x86/kernel/cpu/sgx/arch.h | 338 +++++++++++++++++++++++++++++++++ 1 file changed, 338 insertions(+) create mode 100644 arch/x86/kernel/cpu/sgx/arch.h
diff --git a/arch/x86/kernel/cpu/sgx/arch.h b/arch/x86/kernel/cpu/sgx/arch.h new file mode 100644 index 000000000000..dd7602c44c72 --- /dev/null +++ b/arch/x86/kernel/cpu/sgx/arch.h @@ -0,0 +1,338 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/**
- Copyright(c) 2016-20 Intel Corporation.
- Contains data structures defined by the SGX architecture. Data structures
- defined by the Linux software stack should not be placed here.
- */
+#ifndef _ASM_X86_SGX_ARCH_H +#define _ASM_X86_SGX_ARCH_H
+#include <linux/bits.h> +#include <linux/types.h>
+/* The SGX specific CPUID function. */ +#define SGX_CPUID 0x12 +/* EPC enumeration. */ +#define SGX_CPUID_EPC 2 +/* An invalid EPC section, i.e. the end marker. */ +#define SGX_CPUID_EPC_INVALID 0x0 +/* A valid EPC section. */ +#define SGX_CPUID_EPC_SECTION 0x1 +/* The bitmask for the EPC section type. */ +#define SGX_CPUID_EPC_MASK GENMASK(3, 0)
+/**
- enum sgx_return_code - The return code type for ENCLS, ENCLU and ENCLV
- %SGX_NOT_TRACKED: Previous ETRACK's shootdown sequence has not
been completed yet.
- %SGX_INVALID_EINITTOKEN: EINITTOKEN is invalid and enclave signer's
public key does not match IA32_SGXLEPUBKEYHASH.
- %SGX_UNMASKED_EVENT: An unmasked event, e.g. INTR, was received
- */
+enum sgx_return_code {
- SGX_NOT_TRACKED = 11,
- SGX_INVALID_EINITTOKEN = 16,
- SGX_UNMASKED_EVENT = 128,
+};
+/* The modulus size for 3072-bit RSA keys. */ +#define SGX_MODULUS_SIZE 384
+/**
- enum sgx_miscselect - additional information to an SSA frame
- %SGX_MISC_EXINFO: Report #PF or #GP to the SSA frame.
- Save State Area (SSA) is a stack inside the enclave used to store processor
- state when an exception or interrupt occurs. This enum defines additional
- information stored to an SSA frame.
- */
+enum sgx_miscselect {
- SGX_MISC_EXINFO = BIT(0),
+};
+#define SGX_MISC_RESERVED_MASK GENMASK_ULL(63, 1)
+#define SGX_SSA_GPRS_SIZE 184 +#define SGX_SSA_MISC_EXINFO_SIZE 16
+/**
- enum sgx_attributes - the attributes field in &struct sgx_secs
- %SGX_ATTR_INIT: Enclave can be entered (is initialized).
- %SGX_ATTR_DEBUG: Allow ENCLS(EDBGRD) and ENCLS(EDBGWR).
- %SGX_ATTR_MODE64BIT: Tell that this a 64-bit enclave.
- %SGX_ATTR_PROVISIONKEY: Allow to use provisioning keys for remote
attestation.
- %SGX_ATTR_KSS: Allow to use key separation and sharing (KSS).
- %SGX_ATTR_EINITTOKENKEY: Allow to use token signing key that is used to
sign cryptographic tokens that can be passed to
EINIT as an authorization to run an enclave.- */
+enum sgx_attribute {
- SGX_ATTR_INIT = BIT(0),
- SGX_ATTR_DEBUG = BIT(1),
- SGX_ATTR_MODE64BIT = BIT(2),
- SGX_ATTR_PROVISIONKEY = BIT(4),
- SGX_ATTR_EINITTOKENKEY = BIT(5),
- SGX_ATTR_KSS = BIT(7),
+};
+#define SGX_ATTR_RESERVED_MASK (BIT_ULL(3) | BIT_ULL(6) | GENMASK_ULL(63, 8))
+/**
- struct sgx_secs - SGX Enclave Control Structure (SECS)
- @size: size of the address space
- @base: base address of the address space
- @ssa_frame_size: size of an SSA frame
- @miscselect: additional information stored to an SSA frame
- @attributes: attributes for enclave
- @xfrm: XSave-Feature Request Mask (subset of XCR0)
- @mrenclave: SHA256-hash of the enclave contents
- @mrsigner: SHA256-hash of the public key used to sign the SIGSTRUCT
- @config_id: a user-defined value that is used in key derivation
- @isv_prod_id: a user-defined value that is used in key derivation
- @isv_svn: a user-defined value that is used in key derivation
- @config_svn: a user-defined value that is used in key derivation
- SGX Enclave Control Structure (SECS) is a special enclave page that is not
- visible in the address space. In fact, this structure defines the address
- range and other global attributes for the enclave and it is the first EPC
- page created for any enclave. It is moved from a temporary buffer to an EPC
- by the means of ENCLS[ECREATE] function.
- */
+struct sgx_secs {
- u64 size;
- u64 base;
- u32 ssa_frame_size;
- u32 miscselect;
- u8 reserved1[24];
- u64 attributes;
- u64 xfrm;
- u32 mrenclave[8];
- u8 reserved2[32];
- u32 mrsigner[8];
- u8 reserved3[32];
- u32 config_id[16];
- u16 isv_prod_id;
- u16 isv_svn;
- u16 config_svn;
- u8 reserved4[3834];
+} __packed;
+/**
- enum sgx_tcs_flags - execution flags for TCS
- %SGX_TCS_DBGOPTIN: If enabled allows single-stepping and breakpoints
inside an enclave. It is cleared by EADD but can
be set later with EDBGWR.- */
+enum sgx_tcs_flags {
- SGX_TCS_DBGOPTIN = 0x01,
+};
+#define SGX_TCS_RESERVED_MASK GENMASK_ULL(63, 1) +#define SGX_TCS_RESERVED_SIZE 4024
+/**
- struct sgx_tcs - Thread Control Structure (TCS)
- @state: used to mark an entered TCS
- @flags: execution flags (cleared by EADD)
- @ssa_offset: SSA stack offset relative to the enclave base
- @ssa_index: the current SSA frame index (cleard by EADD)
- @nr_ssa_frames: the number of frame in the SSA stack
- @entry_offset: entry point offset relative to the enclave base
- @exit_addr: address outside the enclave to exit on an exception or
interrupt
- @fs_offset: offset relative to the enclave base to become FS
segment inside the enclave
- @gs_offset: offset relative to the enclave base to become GS
segment inside the enclave
- @fs_limit: size to become a new FS-limit (only 32-bit enclaves)
- @gs_limit: size to become a new GS-limit (only 32-bit enclaves)
- Thread Control Structure (TCS) is an enclave page visible in its address
- space that defines an entry point inside the enclave. A thread enters inside
- an enclave by supplying address of TCS to ENCLU(EENTER). A TCS can be entered
- by only one thread at a time.
- */
+struct sgx_tcs {
- u64 state;
- u64 flags;
- u64 ssa_offset;
- u32 ssa_index;
- u32 nr_ssa_frames;
- u64 entry_offset;
- u64 exit_addr;
- u64 fs_offset;
- u64 gs_offset;
- u32 fs_limit;
- u32 gs_limit;
- u8 reserved[SGX_TCS_RESERVED_SIZE];
+} __packed;
+/**
- struct sgx_pageinfo - an enclave page descriptor
- @addr: address of the enclave page
- @contents: pointer to the page contents
- @metadata: pointer either to a SECINFO or PCMD instance
- @secs: address of the SECS page
- */
+struct sgx_pageinfo {
- u64 addr;
- u64 contents;
- u64 metadata;
- u64 secs;
+} __packed __aligned(32);
+/**
- enum sgx_page_type - bits in the SECINFO flags defining the page type
- %SGX_PAGE_TYPE_SECS: a SECS page
- %SGX_PAGE_TYPE_TCS: a TCS page
- %SGX_PAGE_TYPE_REG: a regular page
- %SGX_PAGE_TYPE_VA: a VA page
- %SGX_PAGE_TYPE_TRIM: a page in trimmed state
- */
+enum sgx_page_type {
- SGX_PAGE_TYPE_SECS,
- SGX_PAGE_TYPE_TCS,
- SGX_PAGE_TYPE_REG,
- SGX_PAGE_TYPE_VA,
- SGX_PAGE_TYPE_TRIM,
+};
+#define SGX_NR_PAGE_TYPES 5 +#define SGX_PAGE_TYPE_MASK GENMASK(7, 0)
+/**
- enum sgx_secinfo_flags - the flags field in &struct sgx_secinfo
- %SGX_SECINFO_R: allow read
- %SGX_SECINFO_W: allow write
- %SGX_SECINFO_X: allow execution
- %SGX_SECINFO_SECS: a SECS page
- %SGX_SECINFO_TCS: a TCS page
- %SGX_SECINFO_REG: a regular page
- %SGX_SECINFO_VA: a VA page
- %SGX_SECINFO_TRIM: a page in trimmed state
- */
+enum sgx_secinfo_flags {
- SGX_SECINFO_R = BIT(0),
- SGX_SECINFO_W = BIT(1),
- SGX_SECINFO_X = BIT(2),
- SGX_SECINFO_SECS = (SGX_PAGE_TYPE_SECS << 8),
- SGX_SECINFO_TCS = (SGX_PAGE_TYPE_TCS << 8),
- SGX_SECINFO_REG = (SGX_PAGE_TYPE_REG << 8),
- SGX_SECINFO_VA = (SGX_PAGE_TYPE_VA << 8),
- SGX_SECINFO_TRIM = (SGX_PAGE_TYPE_TRIM << 8),
+};
+#define SGX_SECINFO_PERMISSION_MASK GENMASK_ULL(2, 0) +#define SGX_SECINFO_PAGE_TYPE_MASK (SGX_PAGE_TYPE_MASK << 8) +#define SGX_SECINFO_RESERVED_MASK ~(SGX_SECINFO_PERMISSION_MASK | \
SGX_SECINFO_PAGE_TYPE_MASK)+/**
- struct sgx_secinfo - describes attributes of an EPC page
- @flags: permissions and type
- Used together with ENCLS leaves that add or modify an EPC page to an
- enclave to define page permissions and type.
- */
+struct sgx_secinfo {
- u64 flags;
- u8 reserved[56];
+} __packed __aligned(64);
+#define SGX_PCMD_RESERVED_SIZE 40
+/**
- struct sgx_pcmd - Paging Crypto Metadata (PCMD)
- @enclave_id: enclave identifier
- @mac: MAC over PCMD, page contents and isvsvn
- PCMD is stored for every swapped page to the regular memory. When ELDU loads
- the page back it recalculates the MAC by using a isvsvn number stored in a
- VA page. Together these two structures bring integrity and rollback
- protection.
- */
+struct sgx_pcmd {
- struct sgx_secinfo secinfo;
- u64 enclave_id;
- u8 reserved[SGX_PCMD_RESERVED_SIZE];
- u8 mac[16];
+} __packed __aligned(128);
+#define SGX_SIGSTRUCT_RESERVED1_SIZE 84 +#define SGX_SIGSTRUCT_RESERVED2_SIZE 20 +#define SGX_SIGSTRUCT_RESERVED3_SIZE 32 +#define SGX_SIGSTRUCT_RESERVED4_SIZE 12
+/**
- struct sgx_sigstruct_header - defines author of the enclave
- @header1: constant byte string
- @vendor: must be either 0x0000 or 0x8086
- @date: YYYYMMDD in BCD
- @header2: costant byte string
- @swdefined: software defined value
- */
+struct sgx_sigstruct_header {
- u64 header1[2];
- u32 vendor;
- u32 date;
- u64 header2[2];
- u32 swdefined;
- u8 reserved1[84];
+} __packed;
+/**
- struct sgx_sigstruct_body - defines contents of the enclave
- @miscselect: additional information stored to an SSA frame
- @misc_mask: required miscselect in SECS
- @attributes: attributes for enclave
- @xfrm: XSave-Feature Request Mask (subset of XCR0)
- @attributes_mask: required attributes in SECS
- @xfrm_mask: required XFRM in SECS
- @mrenclave: SHA256-hash of the enclave contents
- @isvprodid: a user-defined value that is used in key derivation
- @isvsvn: a user-defined value that is used in key derivation
- */
+struct sgx_sigstruct_body {
- u32 miscselect;
- u32 misc_mask;
- u8 reserved2[20];
- u64 attributes;
- u64 xfrm;
- u64 attributes_mask;
- u64 xfrm_mask;
- u8 mrenclave[32];
- u8 reserved3[32];
- u16 isvprodid;
- u16 isvsvn;
+} __packed;
+/**
- struct sgx_sigstruct - an enclave signature
- @header: defines author of the enclave
- @modulus: the modulus of the public key
- @exponent: the exponent of the public key
- @signature: the signature calculated over the fields except modulus,
- @body: defines contents of the enclave
- @q1: a value used in RSA signature verification
- @q2: a value used in RSA signature verification
- Header and body are the parts that are actual signed. The remaining fields
- define the signature of the enclave.
- */
+struct sgx_sigstruct {
- struct sgx_sigstruct_header header;
- u8 modulus[SGX_MODULUS_SIZE];
- u32 exponent;
- u8 signature[SGX_MODULUS_SIZE];
- struct sgx_sigstruct_body body;
- u8 reserved4[12];
- u8 q1[SGX_MODULUS_SIZE];
- u8 q2[SGX_MODULUS_SIZE];
+} __packed;
+#define SGX_LAUNCH_TOKEN_SIZE 304
+#endif /* _ASM_X86_SGX_ARCH_H */