From: Suganath Prabu S suganath-prabu.subramani@broadcom.com
Commit bb855f2a5d7eb8f270eb30fda9b2b87cd682212c upstream.
Trigger Page 1 is used to store information about Master triggers. Below are the Master trigger conditions:
Bit[3] Trigger condition for Device Removal event Bit[2] Trigger condition for TM command issued by driver Bit[1] Trigger condition for Adapter reset issued by driver Bit[0] Trigger condition for IOC Fault state
During driver load, if Master trigger type bit is enabled in the Persistent Trigger Page0, then read the Persistent Trigger Page1 and update the IOC instance's diag_trigger_master.MasterData with Persistent Trigger Page1's MasterTriggerFlags.
Link: https://lore.kernel.org/r/20201126094311.8686-4-suganath-prabu.subramani@bro... Reported-by: kernel test robot lkp@intel.com Signed-off-by: Suganath Prabu S suganath-prabu.subramani@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Integrated-by: Siyu Zhang siyu.zhang@windriver.com --- drivers/scsi/mpt3sas/mpt3sas_base.c | 46 ++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 6 + drivers/scsi/mpt3sas/mpt3sas_config.c | 151 ++++++++++++++++++++++++++ 3 files changed, 203 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 8c91b10c8070..ddacec456c42 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4805,6 +4805,42 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) } }
+/** + * _base_get_master_diag_triggers - get master diag trigger values from + * persistent pages + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage1_t trigger_pg1; + Mpi2ConfigReply_t mpi_reply; + int r; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, + &trigger_pg1); + if (r) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dinitprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return; + } + + if (le16_to_cpu(trigger_pg1.NumMasterTrigger)) + ioc->diag_trigger_master.MasterData |= + le32_to_cpu( + trigger_pg1.MasterTriggers[0].MasterTriggerFlags); +} + /** * _base_check_for_trigger_pages_support - checks whether HBA FW supports * driver trigger pages or not @@ -4851,10 +4887,20 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) */ ioc->diag_trigger_master.MasterData = (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET); + trigger_flags = _base_check_for_trigger_pages_support(ioc); if (trigger_flags < 0) return; + ioc->supports_trigger_pages = 1; + + /* + * Retrieve master diag trigger values from driver trigger pg1 + * if master trigger bit enabled in TriggerFlags. + */ + if ((u16)trigger_flags & + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) + _base_get_master_diag_triggers(ioc); }
/** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 78a8239a83d1..eb03aaa33aae 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1826,6 +1826,12 @@ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, int mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page); +int +mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set);
/* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 2fa60c2e0b8e..9eff6fd3055f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -1876,6 +1876,157 @@ mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, return 0; }
+/** + * mpt3sas_config_get_driver_trigger_pg1 - obtain driver trigger page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg1 - write driver trigger page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_set_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg1 - update driver trigger page 1 + * @ioc: per adapter object + * @master_tg: Master trigger bit map + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set) +{ + Mpi26DriverTriggerPage1_t tg_pg1; + Mpi2ConfigReply_t mpi_reply; + int rc; + u16 ioc_status; + + rc = mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, set); + if (rc) + return rc; + + rc = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + if (set) { + tg_pg1.NumMasterTrigger = cpu_to_le16(1); + tg_pg1.MasterTriggers[0].MasterTriggerFlags = cpu_to_le32( + master_tg->MasterData); + } else { + tg_pg1.NumMasterTrigger = 0; + tg_pg1.MasterTriggers[0].MasterTriggerFlags = 0; + } + + rc = _config_set_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + return 0; + +out: + mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, !set); + + return rc; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components