From: "Maciej W. Rozycki" macro@orcam.me.uk
stable inclusion from stable-5.10.50 commit c850b52e47aa108758f032df916e34f82d1d46f9 bugzilla: 174522 https://gitee.com/openeuler/kernel/issues/I4DNFY
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 78bcae8616ac277d6cb7f38e211493948ed73e30 ]
Support for magic baud rate divisors of 32770 and 32769 used with SMSC Super I/O chips for extra baud rates of 230400 and 460800 respectively where base rate is 115200[1] has been added around Linux 2.5.64, which predates our repo history, but the origin could be identified as commit 2a717aad772f ("Merge with Linux 2.5.64.") with the old MIPS/Linux repo also at: git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git.
Code that is now in `serial8250_do_get_divisor' was added back then to `serial8250_get_divisor', but that code would only ever trigger if one of the higher baud rates was actually requested, and that cannot ever happen, because the earlier call to `serial8250_get_baud_rate' never returns them. This is because it calls `uart_get_baud_rate' with the maximum requested being the base rate, that is clk/16 or 115200 for SMSC chips at their nominal clock rate.
Fix it then and allow UPF_MAGIC_MULTIPLIER baud rates to be selected, by requesting the maximum baud rate of clk/4 rather than clk/16 if the flag has been set. Also correct the minimum baud rate, observing that these ports only support actual (non-magic) divisors of up to 32767 only.
References:
[1] "FDC37M81x, PC98/99 Compliant Enhanced Super I/O Controller with Keyboard/Mouse Wake-Up", Standard Microsystems Corporation, Rev. 03/27/2000, Table 31 - "Baud Rates", p. 77
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Link: https://lore.kernel.org/r/alpine.DEB.2.21.2105190412280.29169@angie.orcam.me... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Chen Jun chenjun102@huawei.com Acked-by: Weilong Chen chenweilong@huawei.com Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/tty/serial/8250/8250_port.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 6e141429c980..6d9c494bed7d 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2635,6 +2635,21 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *old) { unsigned int tolerance = port->uartclk / 100; + unsigned int min; + unsigned int max; + + /* + * Handle magic divisors for baud rates above baud_base on SMSC + * Super I/O chips. Enable custom rates of clk/4 and clk/8, but + * disable divisor values beyond 32767, which are unavailable. + */ + if (port->flags & UPF_MAGIC_MULTIPLIER) { + min = port->uartclk / 16 / UART_DIV_MAX >> 1; + max = (port->uartclk + tolerance) / 4; + } else { + min = port->uartclk / 16 / UART_DIV_MAX; + max = (port->uartclk + tolerance) / 16; + }
/* * Ask the core to calculate the divisor for us. @@ -2642,9 +2657,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, * slower than nominal still match standard baud rates without * causing transmission errors. */ - return uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / UART_DIV_MAX, - (port->uartclk + tolerance) / 16); + return uart_get_baud_rate(port, termios, old, min, max); }
/*