From: Brian Norris briannorris@chromium.org
stable inclusion from stable-v5.10.94 commit 9ddfa1c19191671a8aafcc5cf9181c3d0351be43 bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit e584cdc1549932f87a2707b56bc588cfac5d89e0 upstream.
Since commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()"), we perform most HW configuration in the bind() function. This configuration may be lost on suspend/resume, so we need to call it again. That may lead to errors like this after system suspend/resume:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).
Note that early mailing list versions of this driver borrowed Rockchip's downstream/BSP solution, to do HW configuration in mode_set() (which *is* called at the appropriate pre-enable() times), but that was discarded along the way. I've avoided that still, because mode_set() documentation doesn't suggest this kind of purpose as far as I can tell.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()") Cc: stable@vger.kernel.org Signed-off-by: Brian Norris briannorris@chromium.org Reviewed-by: Chen-Yu Tsai wenst@chromium.org Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aad... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Acked-by: Xie XiuQi xiexiuqi@huawei.com --- .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c index 6691e4523012..b0fb3c3cba59 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c @@ -243,6 +243,8 @@ struct dw_mipi_dsi_rockchip { struct dw_mipi_dsi *dmd; const struct rockchip_dw_dsi_chip_data *cdata; struct dw_mipi_dsi_plat_data pdata; + + bool dsi_bound; };
struct dphy_pll_parameter_map { @@ -944,6 +946,8 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev, goto out_pll_clk; }
+ dsi->dsi_bound = true; + return 0;
out_pll_clk: @@ -965,6 +969,8 @@ static void dw_mipi_dsi_rockchip_unbind(struct device *dev, if (dsi->is_slave) return;
+ dsi->dsi_bound = false; + dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk); @@ -1029,6 +1035,36 @@ static const struct dw_mipi_dsi_host_ops dw_mipi_dsi_rockchip_host_ops = { .detach = dw_mipi_dsi_rockchip_host_detach, };
+static int __maybe_unused dw_mipi_dsi_rockchip_resume(struct device *dev) +{ + struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev); + int ret; + + /* + * Re-configure DSI state, if we were previously initialized. We need + * to do this before rockchip_drm_drv tries to re-enable() any panels. + */ + if (dsi->dsi_bound) { + ret = clk_prepare_enable(dsi->grf_clk); + if (ret) { + DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret); + return ret; + } + + dw_mipi_dsi_rockchip_config(dsi); + if (dsi->slave) + dw_mipi_dsi_rockchip_config(dsi->slave); + + clk_disable_unprepare(dsi->grf_clk); + } + + return 0; +} + +static const struct dev_pm_ops dw_mipi_dsi_rockchip_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_mipi_dsi_rockchip_resume) +}; + static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1248,6 +1284,7 @@ struct platform_driver dw_mipi_dsi_rockchip_driver = { .remove = dw_mipi_dsi_rockchip_remove, .driver = { .of_match_table = dw_mipi_dsi_rockchip_dt_ids, + .pm = &dw_mipi_dsi_rockchip_pm_ops, .name = "dw-mipi-dsi-rockchip", }, };