From: Hans de Goede hdegoede@redhat.com
stable inclusion from stable-v5.10.110 commit 705c70399e062db96c782af66a40b3ac720bfa94 bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]
The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator) mode.
Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es uses 11 when enabling the regulator at boot.
Make bq24190_vbus_is_enabled() also check for 11 so that it does not wrongly returns false when the bits are set to 11.
Fixes: 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator") Cc: Bastien Nocera hadess@hadess.net Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yu Liao liaoyu15@huawei.com Reviewed-by: Wei Li liwei391@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/power/supply/bq24190_charger.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index 845af0f44c02..8c3c378dce0d 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -41,6 +41,7 @@ #define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0 #define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1 #define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2 +#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3 #define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) #define BQ24190_REG_POC_SYS_MIN_SHIFT 1 #define BQ24190_REG_POC_SYS_MIN_MIN 3000 @@ -552,7 +553,11 @@ static int bq24190_vbus_is_enabled(struct regulator_dev *dev) pm_runtime_mark_last_busy(bdi->dev); pm_runtime_put_autosuspend(bdi->dev);
- return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG; + if (ret) + return ret; + + return (val == BQ24190_REG_POC_CHG_CONFIG_OTG || + val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT); }
static const struct regulator_ops bq24190_vbus_ops = {