From: Quanyang Wang quanyang.wang@windriver.com
stable inclusion from stable-v5.10.150 commit 12d31182de8deb7a8e0be6246d661291773427c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0XA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 30eaf02149ecc3c5815e45d27187bf09e925071d ]
The function zynqmp_pll_round_rate is used to find a most appropriate PLL frequency which the hardware can generate according to the desired frequency. For example, if the desired frequency is 297MHz, considering the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz) of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5).
There are two problems with the current code of zynqmp_pll_round_rate:
1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate when the parameter "rate" is an integer multiple of *prate, in other words, if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and just return 660MHz, and this will cause clk_calc_new_rates failure since zynqmp_pll_round_rate returns an invalid rate out of its boundaries.
2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk that zynqmp_pll_round_rate returns an invalid rate because the function DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz, this function will return 1499999985Hz by using the formula below: value = *prate * DIV_ROUND_CLOSEST(rate, *prate)). This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN. because DIV_ROUND_CLOSEST makes some loss in the fractional part.
Signed-off-by: Quanyang Wang quanyang.wang@windriver.com Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.co... Reviewed-by: Shubhrajyoti Datta shubhrajyoti.datta@amd.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Jialin Zhang zhangjialin11@huawei.com --- drivers/clk/zynqmp/pll.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c index abe6afbf3407..2ae7f9129b07 100644 --- a/drivers/clk/zynqmp/pll.c +++ b/drivers/clk/zynqmp/pll.c @@ -99,26 +99,25 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { u32 fbdiv; - long rate_div, f; + u32 mult, div;
- /* Enable the fractional mode if needed */ - rate_div = (rate * FRAC_DIV) / *prate; - f = rate_div % FRAC_DIV; - if (f) { - if (rate > PS_PLL_VCO_MAX) { - fbdiv = rate / PS_PLL_VCO_MAX; - rate = rate / (fbdiv + 1); - } - if (rate < PS_PLL_VCO_MIN) { - fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate); - rate = rate * fbdiv; - } - return rate; + /* Let rate fall inside the range PS_PLL_VCO_MIN ~ PS_PLL_VCO_MAX */ + if (rate > PS_PLL_VCO_MAX) { + div = DIV_ROUND_UP(rate, PS_PLL_VCO_MAX); + rate = rate / div; + } + if (rate < PS_PLL_VCO_MIN) { + mult = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate); + rate = rate * mult; }
fbdiv = DIV_ROUND_CLOSEST(rate, *prate); - fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); - return *prate * fbdiv; + if (fbdiv < PLL_FBDIV_MIN || fbdiv > PLL_FBDIV_MAX) { + fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX); + rate = *prate * fbdiv; + } + + return rate; }
/**