From: "Paul E. McKenney" paulmck@kernel.org
maillist inclusion category: bugfix bugzilla: 189584
Reference: https://lore.kernel.org/all/20240207110846.25168-1-qiang.zhang1211@gmail.com...
--------------------------------
commit bc31e6cb27a9334140ff2f0a209d59b08bc0bc8c upstream.
Holding a mutex across synchronize_rcu_tasks() and acquiring that same mutex in code called from do_exit() after its call to exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop() results in deadlock. This is by design, because tasks that are far enough into do_exit() are no longer present on the tasks list, making it a bit difficult for RCU Tasks to find them, let alone wait on them to do a voluntary context switch. However, such deadlocks are becoming more frequent. In addition, lockdep currently does not detect such deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time (for example, if it blocks acquiring a mutex), then this task is in an RCU Tasks quiescent state. And with some adjustments, RCU Tasks could just as well take advantage of that fact.
This commit therefore eliminates these deadlock by replacing the SRCU-based wait for do_exit() completion with per-CPU lists of tasks currently exiting. A given task will be on one of these per-CPU lists for the same period of time that this task would previously have been in the previous SRCU read-side critical section. These lists enable RCU Tasks to find the tasks that have already been removed from the tasks list, but that must nevertheless be waited upon.
The RCU Tasks grace period gathers any of these do_exit() tasks that it must wait on, and adds them to the list of holdouts. Per-CPU locking and get_task_struct() are used to synchronize addition to and removal from these lists.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin chenzhongjin@huawei.com Signed-off-by: Paul E. McKenney paulmck@kernel.org Signed-off-by: Zqiang qiang.zhang1211@gmail.com --- include/linux/sched.h | 1 + init/init_task.c | 1 + kernel/fork.c | 1 + kernel/rcu/update.c | 65 ++++++++++++++++++++++++++++++------------- 4 files changed, 49 insertions(+), 19 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h index 8fd8c5b7cdc6..2dff665cc33a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -705,6 +705,7 @@ struct task_struct { u8 rcu_tasks_idx; int rcu_tasks_idle_cpu; struct list_head rcu_tasks_holdout_list; + struct list_head rcu_tasks_exit_list; #endif /* #ifdef CONFIG_TASKS_RCU */
struct sched_info sched_info; diff --git a/init/init_task.c b/init/init_task.c index b312a045f4b9..4bc8502d33d3 100644 --- a/init/init_task.c +++ b/init/init_task.c @@ -139,6 +139,7 @@ struct task_struct init_task .rcu_tasks_holdout = false, .rcu_tasks_holdout_list = LIST_HEAD_INIT(init_task.rcu_tasks_holdout_list), .rcu_tasks_idle_cpu = -1, + .rcu_tasks_exit_list = LIST_HEAD_INIT(init_task.rcu_tasks_exit_list), #endif #ifdef CONFIG_CPUSETS .mems_allowed_seq = SEQCNT_ZERO(init_task.mems_allowed_seq), diff --git a/kernel/fork.c b/kernel/fork.c index bfc4534ff116..8c96c517e09e 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1711,6 +1711,7 @@ static inline void rcu_copy_process(struct task_struct *p) p->rcu_tasks_holdout = false; INIT_LIST_HEAD(&p->rcu_tasks_holdout_list); p->rcu_tasks_idle_cpu = -1; + INIT_LIST_HEAD(&p->rcu_tasks_exit_list); #endif /* #ifdef CONFIG_TASKS_RCU */ }
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c index 759ea6881a58..af9a43172d0e 100644 --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -527,7 +527,8 @@ static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq); static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock);
/* Track exiting tasks in order to allow them to be waited for. */ -DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu); +static LIST_HEAD(rtp_exit_list); +static DEFINE_RAW_SPINLOCK(rtp_exit_list_lock);
/* Control stall timeouts. Disable with <= 0, otherwise jiffies till stall. */ #define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10) @@ -661,6 +662,17 @@ static void check_holdout_task(struct task_struct *t, sched_show_task(t); }
+static void rcu_tasks_pertask(struct task_struct *t, struct list_head *hop) +{ + if (t != current && READ_ONCE(t->on_rq) && + !is_idle_task(t)) { + get_task_struct(t); + t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw); + WRITE_ONCE(t->rcu_tasks_holdout, true); + list_add(&t->rcu_tasks_holdout_list, hop); + } +} + /* RCU-tasks kthread that detects grace periods and invokes callbacks. */ static int __noreturn rcu_tasks_kthread(void *arg) { @@ -726,14 +738,7 @@ static int __noreturn rcu_tasks_kthread(void *arg) */ rcu_read_lock(); for_each_process_thread(g, t) { - if (t != current && READ_ONCE(t->on_rq) && - !is_idle_task(t)) { - get_task_struct(t); - t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw); - WRITE_ONCE(t->rcu_tasks_holdout, true); - list_add(&t->rcu_tasks_holdout_list, - &rcu_tasks_holdouts); - } + rcu_tasks_pertask(t, &rcu_tasks_holdouts); } rcu_read_unlock();
@@ -744,8 +749,12 @@ static int __noreturn rcu_tasks_kthread(void *arg) * where they have disabled preemption, allowing the * later synchronize_sched() to finish the job. */ - synchronize_srcu(&tasks_rcu_exit_srcu); - + raw_spin_lock_irqsave(&rtp_exit_list_lock, flags); + list_for_each_entry(t, &rtp_exit_list, rcu_tasks_exit_list) { + if (list_empty(&t->rcu_tasks_holdout_list)) + rcu_tasks_pertask(t, &rcu_tasks_holdouts); + } + raw_spin_unlock_irqrestore(&rtp_exit_list_lock, flags); /* * Each pass through the following loop scans the list * of holdout tasks, removing any that are no longer @@ -802,8 +811,7 @@ static int __noreturn rcu_tasks_kthread(void *arg) * * In addition, this synchronize_sched() waits for exiting * tasks to complete their final preempt_disable() region - * of execution, cleaning up after the synchronize_srcu() - * above. + * of execution. */ synchronize_sched();
@@ -835,20 +843,39 @@ static int __init rcu_spawn_tasks_kthread(void) } core_initcall(rcu_spawn_tasks_kthread);
-/* Do the srcu_read_lock() for the above synchronize_srcu(). */ +/* + * Protect against tasklist scan blind spot while the task is exiting and + * may be removed from the tasklist. Do this by adding the task to yet + * another list. + */ void exit_tasks_rcu_start(void) { + unsigned long flags; + struct task_struct *t = current; + + WARN_ON_ONCE(!list_empty(&t->rcu_tasks_exit_list)); + get_task_struct(t); preempt_disable(); - current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu); + raw_spin_lock_irqsave(&rtp_exit_list_lock, flags); + list_add(&t->rcu_tasks_exit_list, &rtp_exit_list); + raw_spin_unlock_irqrestore(&rtp_exit_list_lock, flags); preempt_enable(); }
-/* Do the srcu_read_unlock() for the above synchronize_srcu(). */ +/* + * Remove the task from the "yet another list" because do_exit() is now + * non-preemptible, allowing synchronize_rcu() to wait beyond this point. + */ void exit_tasks_rcu_finish(void) { - preempt_disable(); - __srcu_read_unlock(&tasks_rcu_exit_srcu, current->rcu_tasks_idx); - preempt_enable(); + unsigned long flags; + struct task_struct *t = current; + + WARN_ON_ONCE(list_empty(&t->rcu_tasks_exit_list)); + raw_spin_lock_irqsave(&rtp_exit_list_lock, flags); + list_del_init(&t->rcu_tasks_exit_list); + raw_spin_unlock_irqrestore(&rtp_exit_list_lock, flags); + put_task_struct(t); }
#endif /* #ifdef CONFIG_TASKS_RCU */