From: Tang Jinyang tangjinyang@wxiat.com
Sunway inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I56QDM
--------------------------------
Dynamic voltage and frequency scaling (DVFS) is a well-known technique to reduce power/or energy consumption of various applications. But in the past, cpu frequency scaling has to be done manually on sw64. Now we add dynamic frequency scaling support, which allows system to scale frequency dynamically according to workload.
Signed-off-by: Tang Jinyang tangjinyang@wxiat.com
Signed-off-by: Gu Zitao guzitao@wxiat.com Acked-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- arch/sw_64/Kconfig | 239 +++++++++++++++++++++++++++++++ arch/sw_64/include/asm/clock.h | 51 +++++++ arch/sw_64/include/asm/hw_init.h | 1 + arch/sw_64/kernel/Makefile | 3 +- arch/sw_64/kernel/clock.c | 176 +++++++++++++++++++++++ arch/sw_64/kernel/platform.c | 20 +++ arch/sw_64/kernel/timer.c | 8 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/sw64_cpufreq.c | 184 ++++++++++++++++++++++++ 9 files changed, 682 insertions(+), 1 deletion(-) create mode 100644 arch/sw_64/include/asm/clock.h create mode 100644 arch/sw_64/kernel/clock.c create mode 100644 arch/sw_64/kernel/platform.c create mode 100644 drivers/cpufreq/sw64_cpufreq.c
diff --git a/arch/sw_64/Kconfig b/arch/sw_64/Kconfig index eebe6c940660..88ffc98c779e 100644 --- a/arch/sw_64/Kconfig +++ b/arch/sw_64/Kconfig @@ -243,6 +243,245 @@ config LOCK_MEMB bool "Insert mem barrier before lock instruction" default y
+menu "CPU Frequency scaling" + +config CPU_FREQ + bool "CPU Frequency scaling" + select SRCU + help + CPU Frequency scaling allows you to change the clock speed of + CPUs on the fly. This is a nice method to save power, because + the lower the CPU clock speed, the less power the CPU consumes. + + Note that this driver doesn't automatically change the CPU + clock speed, you need to either enable a dynamic cpufreq governor + (see below) after boot, or use a userspace tool. + + For details, take a look at file:Documentation/cpu-freq. + + If in doubt, say N. + +if CPU_FREQ + +config SW64_CPUFREQ + bool "sw64 CPU Frequency interface for Chip3 Asic" + depends on SW64_CHIP3 + default y + help + Turns on the interface for SW64_CPU Frequency. + +config CPU_FREQ_GOV_ATTR_SET + bool + +config CPU_FREQ_GOV_COMMON + select CPU_FREQ_GOV_ATTR_SET + select IRQ_WORK + bool + +config CPU_FREQ_BOOST_SW + bool + depends on THERMAL + +config CPU_FREQ_STAT + bool "CPU frequency transition statistics" + help + Export CPU frequency statistics information through sysfs. + + If in doubt, say N. + +choice + prompt "Default CPUFreq governor" + default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ + default CPU_FREQ_DEFAULT_GOV_PERFORMANCE + help + This option sets which CPUFreq governor shall be loaded at + startup. If in doubt, select 'performance'. + +config CPU_FREQ_DEFAULT_GOV_PERFORMANCE + bool "performance" + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'performance' as default. This sets + the frequency statically to the highest frequency supported by + the CPU. + +config CPU_FREQ_DEFAULT_GOV_POWERSAVE + bool "powersave" + select CPU_FREQ_GOV_POWERSAVE + help + Use the CPUFreq governor 'powersave' as default. This sets + the frequency statically to the lowest frequency supported by + the CPU. + +config CPU_FREQ_DEFAULT_GOV_USERSPACE + bool "userspace" + select CPU_FREQ_GOV_USERSPACE + help + Use the CPUFreq governor 'userspace' as default. This allows + you to set the CPU frequency manually or when a userspace + program shall be able to set the CPU dynamically without having + to enable the userspace governor manually. + +config CPU_FREQ_DEFAULT_GOV_ONDEMAND + bool "ondemand" + select CPU_FREQ_GOV_ONDEMAND + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'ondemand' as default. This allows + you to get a full dynamic frequency capable system by simply + loading your cpufreq low-level hardware driver. + Be aware that not all cpufreq drivers support the ondemand + governor. If unsure have a look at the help section of the + driver. Fallback governor will be the performance governor. + +config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE + bool "conservative" + select CPU_FREQ_GOV_CONSERVATIVE + select CPU_FREQ_GOV_PERFORMANCE + help + Use the CPUFreq governor 'conservative' as default. This allows + you to get a full dynamic frequency capable system by simply + loading your cpufreq low-level hardware driver. + Be aware that not all cpufreq drivers support the conservative + governor. If unsure have a look at the help section of the + driver. Fallback governor will be the performance governor. + +config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL + bool "schedutil" + depends on SMP + select CPU_FREQ_GOV_SCHEDUTIL + select CPU_FREQ_GOV_PERFORMANCE + help + Use the 'schedutil' CPUFreq governor by default. If unsure, + have a look at the help section of that governor. The fallback + governor will be 'performance'. + +endchoice + +config CPU_FREQ_GOV_PERFORMANCE + tristate "'performance' governor" + help + This cpufreq governor sets the frequency statically to the + highest available CPU frequency. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_performance. + + If in doubt, say Y. + +config CPU_FREQ_GOV_POWERSAVE + tristate "'powersave' governor" + help + This cpufreq governor sets the frequency statically to the + lowest available CPU frequency. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_powersave. + + If in doubt, say Y. + +config CPU_FREQ_GOV_USERSPACE + tristate "'userspace' governor for userspace frequency scaling" + help + Enable this cpufreq governor when you either want to set the + CPU frequency manually or when a userspace program shall + be able to set the CPU dynamically, like on LART + http://www.lartmaker.nl/. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_userspace. + + For details, take a look at file:Documentation/cpu-freq/. + + If in doubt, say Y. + +config CPU_FREQ_GOV_ONDEMAND + tristate "'ondemand' cpufreq policy governor" + select CPU_FREQ_GOV_COMMON + help + 'ondemand' - This driver adds a dynamic cpufreq policy governor. + The governor does a periodic polling and + changes frequency based on the CPU utilization. + The support for this governor depends on CPU capability to + do fast frequency switching (i.e, very low latency frequency + transitions). + + To compile this driver as a module, choose M here: the + module will be called cpufreq_ondemand. + + For details, take a look at linux/Documentation/cpu-freq. + + If in doubt, say N. + +config CPU_FREQ_GOV_CONSERVATIVE + tristate "'conservative' cpufreq governor" + depends on CPU_FREQ + select CPU_FREQ_GOV_COMMON + help + 'conservative' - this driver is rather similar to the 'ondemand' + governor both in its source code and its purpose, the difference is + its optimisation for better suitability in a battery powered + environment. The frequency is gracefully increased and decreased + rather than jumping to 100% when speed is required. + + If you have a desktop machine then you should really be considering + the 'ondemand' governor instead, however if you are using a laptop, + PDA or even an AMD64 based computer (due to the unacceptable + step-by-step latency issues between the minimum and maximum frequency + transitions in the CPU) you will probably want to use this governor. + + To compile this driver as a module, choose M here: the + module will be called cpufreq_conservative. + + For details, take a look at linux/Documentation/cpu-freq. + + If in doubt, say N. + +config CPU_FREQ_GOV_SCHEDUTIL + bool "'schedutil' cpufreq policy governor" + depends on CPU_FREQ && SMP + select CPU_FREQ_GOV_ATTR_SET + select IRQ_WORK + help + This governor makes decisions based on the utilization data provided + by the scheduler. It sets the CPU frequency to be proportional to + the utilization/capacity ratio coming from the scheduler. If the + utilization is frequency-invariant, the new frequency is also + proportional to the maximum available frequency. If that is not the + case, it is proportional to the current frequency of the CPU. The + frequency tipping point is at utilization/capacity equal to 80% in + both cases. + + If in doubt, say N. + +comment "CPU frequency scaling drivers" + +config CPUFREQ_DT + tristate "Generic DT based cpufreq driver" + depends on HAVE_CLK && OF + # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y: + depends on !CPU_THERMAL || THERMAL + select CPUFREQ_DT_PLATDEV + select PM_OPP + help + This adds a generic DT based cpufreq driver for frequency management. + It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) + systems. + + If in doubt, say N. + +config CPUFREQ_DT_PLATDEV + bool + help + This adds a generic DT based cpufreq platdev driver for frequency + management. This creates a 'cpufreq-dt' platform device, on the + supported platforms. + + If in doubt, say N. + +endif +endmenu + # clear all implied options (don't want default values for those): # Most of these machines have ISA slots; not exactly sure which don't, # and this doesn't activate hordes of code, so do it always. diff --git a/arch/sw_64/include/asm/clock.h b/arch/sw_64/include/asm/clock.h new file mode 100644 index 000000000000..437031a65ff1 --- /dev/null +++ b/arch/sw_64/include/asm/clock.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _ASM_SW64_CLOCK_H +#define _ASM_SW64_CLOCK_H + +#include <linux/kref.h> +#include <linux/list.h> +#include <linux/seq_file.h> +#include <linux/clk.h> +#include <linux/cpufreq.h> + +struct clk; + +extern struct cpufreq_frequency_table sw64_clockmod_table[]; + +struct clk_ops { + void (*init)(struct clk *clk); + void (*enable)(struct clk *clk); + void (*disable)(struct clk *clk); + void (*recalc)(struct clk *clk); + int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate)(struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + const struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +int clk_init(void); + +int sw64_set_rate(int index, unsigned long rate); + +struct clk *sw64_clk_get(struct device *dev, const char *id); +unsigned long sw64_clk_get_rate(struct clk *clk); + +void sw64_update_clockevents(unsigned long cpu, u32 freq); +#endif /* _ASM_SW64_CLOCK_H */ diff --git a/arch/sw_64/include/asm/hw_init.h b/arch/sw_64/include/asm/hw_init.h index 594704756e72..f60a58570a92 100644 --- a/arch/sw_64/include/asm/hw_init.h +++ b/arch/sw_64/include/asm/hw_init.h @@ -168,5 +168,6 @@ DECLARE_STATIC_KEY_FALSE(run_mode_emul_key); #define CACHE_INDEX_BITS_MASK (0x3fUL << CACHE_INDEX_BITS_SHIFT) #define CACHE_INDEX_BITS(val) \ (((val) & CACHE_INDEX_BITS_MASK) >> CACHE_INDEX_BITS_SHIFT) +#define current_cpu_data cpu_data[smp_processor_id()]
#endif /* HW_INIT_H */ diff --git a/arch/sw_64/kernel/Makefile b/arch/sw_64/kernel/Makefile index 99516d3ca7cf..628e0c1bd44b 100644 --- a/arch/sw_64/kernel/Makefile +++ b/arch/sw_64/kernel/Makefile @@ -15,7 +15,7 @@ endif
obj-y := entry.o traps.o process.o sys_sw64.o irq.o \ irq_sw64.o signal.o setup.o ptrace.o time.o \ - systbls.o dup_print.o tc.o \ + systbls.o dup_print.o tc.o platform.o \ insn.o early_init.o topology.o cacheinfo.o \ vdso.o vdso/
@@ -44,6 +44,7 @@ endif
# Core logic support obj-$(CONFIG_SW64) += core.o timer.o +obj-$(CONFIG_SW64_CPUFREQ) += clock.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o diff --git a/arch/sw_64/kernel/clock.c b/arch/sw_64/kernel/clock.c new file mode 100644 index 000000000000..fd154a0a66e9 --- /dev/null +++ b/arch/sw_64/kernel/clock.c @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/sw/kernel/setup.c + * + * Copyright (C) 1995 Linus Torvalds + */ + +#include <linux/clk.h> +#include <linux/cpufreq.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/delay.h> + +#include <asm/sw64io.h> +#include <asm/hw_init.h> +#include <asm/debug.h> +#include <asm/clock.h> + +#define CLK_PRT 0x1UL +#define CORE_CLK0_V (0x1UL << 1) +#define CORE_CLK0_R (0x1UL << 2) +#define CORE_CLK2_V (0x1UL << 15) +#define CORE_CLK2_R (0x1UL << 16) + +#define CLK_LV1_SEL_PRT 0x1UL +#define CLK_LV1_SEL_MUXA (0x1UL << 2) +#define CLK_LV1_SEL_MUXB (0x1UL << 3) + +#define CORE_PLL0_CFG_SHIFT 4 +#define CORE_PLL2_CFG_SHIFT 18 + +/* Minimum CLK support */ +enum { + DC_0, DC_1, DC_2, DC_3, DC_4, DC_5, DC_6, DC_7, DC_8, + DC_9, DC_10, DC_11, DC_12, DC_13, DC_14, DC_15, DC_16, DC_RESV +}; + +static int cpu_freq[14] = { + 0, 1200, 1800, 1900, + 1950, 2000, 2050, 2100, + 2150, 2200, 2250, 2300, + 2350, 2400 }; + +struct cpufreq_frequency_table sw64_clockmod_table[] = { + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {0, DC_1, 0}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {0, DC_2, 0}, + {-1, DC_RESV, CPUFREQ_ENTRY_INVALID}, + {0, DC_3, 0}, + {0, DC_4, 0}, + {0, DC_5, 0}, + {0, DC_6, 0}, + {0, DC_7, 0}, + {0, DC_8, 0}, + {0, DC_9, 0}, + {0, DC_10, 0}, + {0, DC_11, 0}, + {0, DC_12, 0}, + {0, DC_13, 0}, +{-1, DC_RESV, CPUFREQ_TABLE_END}, +}; +EXPORT_SYMBOL_GPL(sw64_clockmod_table); + +static struct clk cpu_clk = { + .name = "cpu_clk", + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, + .rate = 2400000000, +}; + +struct clk *sw64_clk_get(struct device *dev, const char *id) +{ + return &cpu_clk; +} +EXPORT_SYMBOL(sw64_clk_get); + +unsigned long sw64_clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0; + + return (unsigned long)clk->rate; +} +EXPORT_SYMBOL(sw64_clk_get_rate); + +int sw64_set_rate(int index, unsigned long rate) +{ + unsigned int i, val; + + rate /= 1000000; + + for (i = 0; i < sizeof(cpu_freq)/sizeof(int); i++) { + if (rate == cpu_freq[i]) { + index = i; + break; + } + } + + if (index < 0) + return -EINVAL; + + sw64_io_write(0, CLK_CTL, CORE_CLK2_R | CORE_CLK2_V | CLK_PRT); + sw64_io_write(1, CLK_CTL, CORE_CLK2_R | CORE_CLK2_V | CLK_PRT); + val = sw64_io_read(0, CLK_CTL); + + sw64_io_write(0, CLK_CTL, val | index << CORE_PLL2_CFG_SHIFT); + sw64_io_write(1, CLK_CTL, val | index << CORE_PLL2_CFG_SHIFT); + + udelay(1); + + sw64_io_write(0, CLK_CTL, CORE_CLK2_V | CLK_PRT + | index << CORE_PLL2_CFG_SHIFT); + sw64_io_write(1, CLK_CTL, CORE_CLK2_V | CLK_PRT + | index << CORE_PLL2_CFG_SHIFT); + val = sw64_io_read(0, CLK_CTL); + + /* LV1 select PLL1/PLL2 */ + sw64_io_write(0, CLU_LV1_SEL, CLK_LV1_SEL_MUXA | CLK_LV1_SEL_PRT); + sw64_io_write(1, CLU_LV1_SEL, CLK_LV1_SEL_MUXA | CLK_LV1_SEL_PRT); + + /* Set CLK_CTL PLL0 */ + sw64_io_write(0, CLK_CTL, val | CORE_CLK0_R | CORE_CLK0_V); + sw64_io_write(1, CLK_CTL, val | CORE_CLK0_R | CORE_CLK0_V); + + sw64_io_write(0, CLK_CTL, val | CORE_CLK0_R | CORE_CLK0_V + | index << CORE_PLL0_CFG_SHIFT); + sw64_io_write(1, CLK_CTL, val | CORE_CLK0_R | CORE_CLK0_V + | index << CORE_PLL0_CFG_SHIFT); + + udelay(1); + + sw64_io_write(0, CLK_CTL, val | CORE_CLK0_V + | index << CORE_PLL0_CFG_SHIFT); + sw64_io_write(1, CLK_CTL, val | CORE_CLK0_V + | index << CORE_PLL0_CFG_SHIFT); + + /* LV1 select PLL0/PLL1 */ + sw64_io_write(0, CLU_LV1_SEL, CLK_LV1_SEL_MUXB | CLK_LV1_SEL_PRT); + sw64_io_write(1, CLU_LV1_SEL, CLK_LV1_SEL_MUXB | CLK_LV1_SEL_PRT); + + return index; +} +EXPORT_SYMBOL_GPL(sw64_set_rate); diff --git a/arch/sw_64/kernel/platform.c b/arch/sw_64/kernel/platform.c new file mode 100644 index 000000000000..f4c880acaa40 --- /dev/null +++ b/arch/sw_64/kernel/platform.c @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/sw/kernel/setup.c + * + * Copyright (C) 1995 Linus Torvalds + */ + +#include <linux/platform_device.h> + +static struct platform_device sw64_cpufreq_device = { + .name = "sw64_cpufreq", + .id = -1, +}; + +static int __init sw64_cpufreq_init(void) +{ + return platform_device_register(&sw64_cpufreq_device); +} + +arch_initcall(sw64_cpufreq_init); diff --git a/arch/sw_64/kernel/timer.c b/arch/sw_64/kernel/timer.c index 60c75096d8c4..268537d5e483 100644 --- a/arch/sw_64/kernel/timer.c +++ b/arch/sw_64/kernel/timer.c @@ -87,6 +87,14 @@ static int timer_set_oneshot(struct clock_event_device *evt) return 0; }
+void sw64_update_clockevents(unsigned long cpu, u32 freq) +{ + struct clock_event_device *swevt = &per_cpu(timer_events, cpu); + + if (cpu == smp_processor_id()) + clockevents_update_freq(swevt, freq); +} + /* * Setup the local timer for this CPU. Copy the initilized values * of the boot CPU and register the clock event in the framework. diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index f1b7e3dd6e5d..7c762e105146 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -109,3 +109,4 @@ obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o +obj-$(CONFIG_SW64_CPUFREQ) += sw64_cpufreq.o diff --git a/drivers/cpufreq/sw64_cpufreq.c b/drivers/cpufreq/sw64_cpufreq.c new file mode 100644 index 000000000000..ba180e389c9e --- /dev/null +++ b/drivers/cpufreq/sw64_cpufreq.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/sw/kernel/setup.c + * + * Copyright (C) 1995 Linus Torvalds + */ + +/* + * Cpufreq driver for the sw64 processors + * + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/sched.h> /* set_cpus_allowed() */ +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/mod_devicetable.h> + +#include <asm/hw_init.h> +#include <asm/clock.h> + +static uint nowait; + +static struct clk *cpuclk; + +static int sw64_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data); + +static struct notifier_block sw64_cpufreq_notifier_block = { + .notifier_call = sw64_cpu_freq_notifier +}; + +static int sw64_cpu_freq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freqs = (struct cpufreq_freqs *)data; + unsigned long cpu; + + for_each_online_cpu(cpu) { + if (val == CPUFREQ_POSTCHANGE) { + sw64_update_clockevents(cpu, freqs->new * 1000); + current_cpu_data.loops_per_jiffy = loops_per_jiffy; + } + } + + return 0; +} + +static unsigned int sw64_cpufreq_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); + + if (!policy || IS_ERR(policy->clk)) { + pr_err("%s: No %s associated to cpu: %d\n", + __func__, policy ? "clk" : "policy", cpu); + return 0; + } + + return sw64_clk_get_rate(policy->clk); +} + +/* + * Here we notify other drivers of the proposed change and the final change. + */ +static int sw64_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned long freq; + + freq = (get_cpu_freq() / 1000) * index / 48; + + /* setting the cpu frequency */ + sw64_set_rate(-1, freq * 1000); + + return 0; +} + +static int sw64_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned long rate; + int i; + + cpuclk = sw64_clk_get(NULL, "cpu_clk"); + if (IS_ERR(cpuclk)) { + pr_err("couldn't get CPU clk\n"); + return PTR_ERR(cpuclk); + } + + rate = get_cpu_freq() / 1000; + + /* clock table init */ + for (i = 0; + (sw64_clockmod_table[i].frequency != CPUFREQ_TABLE_END); + i++) + if (sw64_clockmod_table[i].frequency == 0) + sw64_clockmod_table[i].frequency = (rate * i) / 48; + + sw64_set_rate(-1, rate * 1000); + + policy->clk = cpuclk; + + cpufreq_generic_init(policy, &sw64_clockmod_table[0], 0); + + return 0; +} + +static int sw64_cpufreq_verify(struct cpufreq_policy_data *policy) +{ + return cpufreq_frequency_table_verify(policy, &sw64_clockmod_table[0]); +} + +static int sw64_cpufreq_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct freq_attr *sw64_table_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, NULL, +}; + +static struct cpufreq_driver sw64_cpufreq_driver = { + .name = "sw64", + .init = sw64_cpufreq_cpu_init, + .verify = sw64_cpufreq_verify, + .target_index = sw64_cpufreq_target, + .get = sw64_cpufreq_get, + .exit = sw64_cpufreq_exit, + .attr = sw64_table_attr, +}; + +static const struct platform_device_id platform_device_ids[] = { + { + .name = "sw64_cpufreq", + }, + {} +}; + +MODULE_DEVICE_TABLE(platform, platform_device_ids); + +static struct platform_driver platform_driver = { + .driver = { + .name = "sw64_cpufreq", + }, + .id_table = platform_device_ids, +}; + + +static int __init cpufreq_init(void) +{ + int ret; + + /* Register platform stuff */ + ret = platform_driver_register(&platform_driver); + if (ret) + return ret; + + pr_info("SW-64 CPU frequency driver\n"); + + cpufreq_register_notifier(&sw64_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + return cpufreq_register_driver(&sw64_cpufreq_driver); +} + +static void __exit cpufreq_exit(void) +{ + cpufreq_unregister_driver(&sw64_cpufreq_driver); + cpufreq_unregister_notifier(&sw64_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + platform_driver_unregister(&platform_driver); +} + +module_init(cpufreq_init); +module_exit(cpufreq_exit); + +module_param(nowait, uint, 0644); +MODULE_PARM_DESC(nowait, "Disable SW-64 specific wait"); + +MODULE_DESCRIPTION("cpufreq driver for sw64"); +MODULE_LICENSE("GPL");