From: Bharat Kumar Gogada bharat.kumar.gogada@xilinx.com
mainline inclusion from mainline-v5.1-rc1 commit b4f6dcb9d35688392d668c46e834f72c55900b49 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I47H3V CVE: NA
--------------------------------
commit b4f6dcb9d35688392d668c46e834f72c55900b49 upstream. Backport summary: for 4.19 kernel ICX PCIe Gen4 support.
As per Figure 6-3 in PCIe r4.0, sec 6.2.6, ERR_ messages will be forwarded from the secondary interface to the primary interface, if the SERR# Enable bit in the Bridge Control register is set.
It seems clear that an ACPI hotplug parameter method (_HPP or _HPX) that tells us to "enable SERR in the command register" (ACPI v6.2, sec 6.2.8, 6.2.9.1) refers to PCI_COMMAND_SERR, which enables reporting of errors by the function itself.
For bridges, we also interpreted that to mean we should enable PCI_BRIDGE_CTL_SERR, which enables *forwarding* of errors by the bridge. But we didn't enable PCI_BRIDGE_CTL_SERR anywhere else, which means we never enabled it for non-ACPI systems or ACPI systems that didn't supply hotplug parameters.
That means errors reported below bridges were often never forwarded up to a Root Port where they could be signaled via AER.
Enable PCI_BRIDGE_CTL_SERR for all bridges so we can get better error reporting for downstream devices.
Signed-off-by: Bharat Kumar Gogada bharat.kumar.gogada@xilinx.com [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas bhelgaas@google.com (cherry picked from commit b4f6dcb9d35688392d668c46e834f72c55900b49)
Signed-off-by: Ethan Zhao haifeng.zhao@intel.com Signed-off-by: Jackie Liu liuyun01@kylinos.cn Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Xiongfeng Wang wangxiongfeng2@huawei.com Reviewed-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pci/probe.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index b45bcfcf8090a..c64d91d4fb9b9 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1947,8 +1947,6 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, hpp->latency_timer); pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); - if (hpp->enable_serr) - pci_bctl |= PCI_BRIDGE_CTL_SERR; if (hpp->enable_perr) pci_bctl |= PCI_BRIDGE_CTL_PARITY; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); @@ -2230,6 +2228,24 @@ static void pci_configure_eetlp_prefix(struct pci_dev *dev) #endif }
+static void pci_configure_serr(struct pci_dev *dev) +{ + u16 control; + + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + + /* + * A bridge will not forward ERR_ messages coming from an + * endpoint unless SERR# forwarding is enabled. + */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control); + if (!(control & PCI_BRIDGE_CTL_SERR)) { + control |= PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control); + } + } +} + static void pci_configure_device(struct pci_dev *dev) { struct hotplug_params hpp; @@ -2240,6 +2256,7 @@ static void pci_configure_device(struct pci_dev *dev) pci_configure_relaxed_ordering(dev); pci_configure_ltr(dev); pci_configure_eetlp_prefix(dev); + pci_configure_serr(dev);
memset(&hpp, 0, sizeof(hpp)); ret = pci_get_hp_params(dev, &hpp);