From: Linus Walleij linus.walleij@linaro.org
stable inclusion from stable-v5.10.110 commit ef1a6ab36dc3644073736ca5df9f6742a1aa9a64 bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit e941dc13fd3717122207d74539ab95da07ef797f ]
I observed the following problem with the BT404 touch pad running the Phosh UI:
When e.g. typing on the virtual keyboard pressing "g" would produce "ggg".
After some analysis it turns out the firmware reports that three fingers hit that coordinate at the same time, finger 0, 2 and 4 (of the five available 0,1,2,3,4).
DOWN Zinitix-TS 3-0020: finger 0 down (246, 395) Zinitix-TS 3-0020: finger 1 up (0, 0) Zinitix-TS 3-0020: finger 2 down (246, 395) Zinitix-TS 3-0020: finger 3 up (0, 0) Zinitix-TS 3-0020: finger 4 down (246, 395) UP Zinitix-TS 3-0020: finger 0 up (246, 395) Zinitix-TS 3-0020: finger 2 up (246, 395) Zinitix-TS 3-0020: finger 4 up (246, 395)
This is one touch and release: i.e. this is all reported on touch (down) and release.
There is a field in the struct touch_event called finger_cnt which is actually a bitmask of the fingers active in the event.
Rename this field finger_mask as this matches the use contents better, then use for_each_set_bit() to iterate over just the fingers that are actally active.
Factor out a finger reporting function zinitix_report_fingers() to handle all fingers.
Also be more careful in reporting finger down/up: we were reporting every event with input_mt_report_slot_state(..., true); but this should only be reported on finger down or move, not on finger up, so also add code to check p->sub_status to see what is happening and report correctly.
After this my Zinitix BT404 touchscreen report fingers flawlessly.
The vendor drive I have notably does not use the "finger_cnt" and contains obviously incorrect code like this:
if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM) touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM;
As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is a bitmask this seems quite confused.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yu Liao liaoyu15@huawei.com Reviewed-by: Wei Li liwei391@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/input/touchscreen/zinitix.c | 44 +++++++++++++++++++++++------ 1 file changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index 6df6f07f1ac6..17b10b81c713 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -135,7 +135,7 @@ struct point_coord {
struct touch_event { __le16 status; - u8 finger_cnt; + u8 finger_mask; u8 time_stamp; struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM]; }; @@ -311,11 +311,32 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541) static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot, const struct point_coord *p) { + u16 x, y; + + if (unlikely(!(p->sub_status & + (SUB_BIT_UP | SUB_BIT_DOWN | SUB_BIT_MOVE)))) { + dev_dbg(&bt541->client->dev, "unknown finger event %#02x\n", + p->sub_status); + return; + } + + x = le16_to_cpu(p->x); + y = le16_to_cpu(p->y); + input_mt_slot(bt541->input_dev, slot); - input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true); - touchscreen_report_pos(bt541->input_dev, &bt541->prop, - le16_to_cpu(p->x), le16_to_cpu(p->y), true); - input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width); + if (input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, + !(p->sub_status & SUB_BIT_UP))) { + touchscreen_report_pos(bt541->input_dev, + &bt541->prop, x, y, true); + input_report_abs(bt541->input_dev, + ABS_MT_TOUCH_MAJOR, p->width); + dev_dbg(&bt541->client->dev, "finger %d %s (%u, %u)\n", + slot, p->sub_status & SUB_BIT_DOWN ? "down" : "move", + x, y); + } else { + dev_dbg(&bt541->client->dev, "finger %d up (%u, %u)\n", + slot, x, y); + } }
static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) @@ -323,6 +344,7 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) struct bt541_ts_data *bt541 = bt541_handler; struct i2c_client *client = bt541->client; struct touch_event touch_event; + unsigned long finger_mask; int error; int i;
@@ -335,10 +357,14 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) goto out; }
- for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) - if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST) - zinitix_report_finger(bt541, i, - &touch_event.point_coord[i]); + finger_mask = touch_event.finger_mask; + for_each_set_bit(i, &finger_mask, MAX_SUPPORTED_FINGER_NUM) { + const struct point_coord *p = &touch_event.point_coord[i]; + + /* Only process contacts that are actually reported */ + if (p->sub_status & SUB_BIT_EXIST) + zinitix_report_finger(bt541, i, p); + }
input_mt_sync_frame(bt541->input_dev); input_sync(bt541->input_dev);