From: Benjamin Li benl@squareup.com
stable inclusion from stable-v5.10.94 commit 22406ed4e389b261cbe4353f3f6dfcecadd37e06 bugzilla: https://gitee.com/openeuler/kernel/issues/I531X9
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit c9c5608fafe4dae975c9644c7d14c51ad3b0ed73 ]
status.band is used in determination of status.rate -- for 5GHz on legacy rates there is a linear shift between the BD descriptor's rate field and the wcn36xx driver's rate table (wcn_5ghz_rates).
We have a special clause to populate status.band for hardware scan offload frames. However, this block occurs after status.rate is already populated. Correctly handle this dependency by moving the band block before the rate block.
This patch addresses kernel warnings & missing scan results for 5GHz APs that send their beacons/probe responses at the higher four legacy rates (24-54 Mbps), when using hardware scan offload:
------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8 Modules linked in: wcn36xx [...] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.107-g73909fa #1 Hardware name: Square, Inc. T2 (all variants) (DT) Call trace: dump_backtrace+0x0/0x148 show_stack+0x14/0x1c dump_stack+0xb8/0xf0 __warn+0x2ac/0x2d8 warn_slowpath_null+0x44/0x54 ieee80211_rx_napi+0x744/0x8d8 ieee80211_tasklet_handler+0xa4/0xe0 tasklet_action_common+0xe0/0x118 tasklet_action+0x20/0x28 __do_softirq+0x108/0x1ec irq_exit+0xd4/0xd8 __handle_domain_irq+0x84/0xbc gic_handle_irq+0x4c/0xb8 el1_irq+0xe8/0x190 lpm_cpuidle_enter+0x220/0x260 cpuidle_enter_state+0x114/0x1c0 cpuidle_enter+0x34/0x48 do_idle+0x150/0x268 cpu_startup_entry+0x20/0x24 rest_init+0xd4/0xe0 start_kernel+0x398/0x430 ---[ end trace ae28cb759352b403 ]---
Fixes: 8a27ca394782 ("wcn36xx: Correct band/freq reporting on RX") Signed-off-by: Benjamin Li benl@squareup.com Tested-by: Loic Poulain loic.poulain@linaro.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20211104010548.1107405-2-benl@squareup.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Acked-by: Xie XiuQi xiexiuqi@huawei.com --- drivers/net/wireless/ath/wcn36xx/txrx.c | 37 +++++++++++++------------ 1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c index bbd7194c82e2..f76de106570d 100644 --- a/drivers/net/wireless/ath/wcn36xx/txrx.c +++ b/drivers/net/wireless/ath/wcn36xx/txrx.c @@ -259,8 +259,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb) fc = __le16_to_cpu(hdr->frame_control); sn = IEEE80211_SEQ_TO_SN(__le16_to_cpu(hdr->seq_ctrl));
- status.freq = WCN36XX_CENTER_FREQ(wcn); - status.band = WCN36XX_BAND(wcn); status.mactime = 10; status.signal = -get_rssi0(bd); status.antenna = 1; @@ -272,6 +270,25 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
wcn36xx_dbg(WCN36XX_DBG_RX, "status.flags=%x\n", status.flag);
+ if (bd->scan_learn) { + /* If packet originate from hardware scanning, extract the + * band/channel from bd descriptor. + */ + u8 hwch = (bd->reserved0 << 4) + bd->rx_ch; + + if (bd->rf_band != 1 && hwch <= sizeof(ab_rx_ch_map) && hwch >= 1) { + status.band = NL80211_BAND_5GHZ; + status.freq = ieee80211_channel_to_frequency(ab_rx_ch_map[hwch - 1], + status.band); + } else { + status.band = NL80211_BAND_2GHZ; + status.freq = ieee80211_channel_to_frequency(hwch, status.band); + } + } else { + status.band = WCN36XX_BAND(wcn); + status.freq = WCN36XX_CENTER_FREQ(wcn); + } + if (bd->rate_id < ARRAY_SIZE(wcn36xx_rate_table)) { rate = &wcn36xx_rate_table[bd->rate_id]; status.encoding = rate->encoding; @@ -298,22 +315,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb) ieee80211_is_probe_resp(hdr->frame_control)) status.boottime_ns = ktime_get_boottime_ns();
- if (bd->scan_learn) { - /* If packet originates from hardware scanning, extract the - * band/channel from bd descriptor. - */ - u8 hwch = (bd->reserved0 << 4) + bd->rx_ch; - - if (bd->rf_band != 1 && hwch <= sizeof(ab_rx_ch_map) && hwch >= 1) { - status.band = NL80211_BAND_5GHZ; - status.freq = ieee80211_channel_to_frequency(ab_rx_ch_map[hwch - 1], - status.band); - } else { - status.band = NL80211_BAND_2GHZ; - status.freq = ieee80211_channel_to_frequency(hwch, status.band); - } - } - memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
if (ieee80211_is_beacon(hdr->frame_control)) {