From: Baochen Qiang quic_bqiang@quicinc.com
stable inclusion from stable-v6.6.33 commit 014e4e9275decfde2db8f1a96e14f75855d0146b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAD6H2
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit e57b7d62a1b2f496caf0beba81cec3c90fad80d5 ]
Currently host relies on CE interrupts to get notified that the service ready message is ready. This results in timeout issue if the interrupt is not fired, due to some unknown reasons. See below logs:
[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received ... [76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110
And finally it causes WLAN interface bring up failure.
Change to give it one more chance here by polling CE rings, before failing directly.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices") Reported-by: James Prestwood prestwoj@gmail.com Tested-By: James Prestwood prestwoj@gmail.com # on QCA6174 hw3.2 Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@... Signed-off-by: Baochen Qiang quic_bqiang@quicinc.com Acked-by: Jeff Johnson quic_jjohnson@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Wang Hai wanghai38@huawei.com --- drivers/net/wireless/ath/ath10k/wmi.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 05fa7d4c0e1a..ee08a4c668f7 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -1762,12 +1762,32 @@ void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar) { - unsigned long time_left; + unsigned long time_left, i;
time_left = wait_for_completion_timeout(&ar->wmi.service_ready, WMI_SERVICE_READY_TIMEOUT_HZ); - if (!time_left) - return -ETIMEDOUT; + if (!time_left) { + /* Sometimes the PCI HIF doesn't receive interrupt + * for the service ready message even if the buffer + * was completed. PCIe sniffer shows that it's + * because the corresponding CE ring doesn't fires + * it. Workaround here by polling CE rings once. + */ + ath10k_warn(ar, "failed to receive service ready completion, polling..\n"); + + for (i = 0; i < CE_COUNT; i++) + ath10k_hif_send_complete_check(ar, i, 1); + + time_left = wait_for_completion_timeout(&ar->wmi.service_ready, + WMI_SERVICE_READY_TIMEOUT_HZ); + if (!time_left) { + ath10k_warn(ar, "polling timed out\n"); + return -ETIMEDOUT; + } + + ath10k_warn(ar, "service ready completion received, continuing normally\n"); + } + return 0; }