From: Suganath Prabu S suganath-prabu.subramani@broadcom.com
Commit f98790c0037590cd7022ba9e22cf4ff90d3b2bb3 upstream.
The controller time currently gets updated with host time during driver load or when a controller reset is issued. I.e. when host issues the IOCInit request message to the HBA firmware. This IOCInit message has a field named 'TimeStamp' with which the host updates the controller time.
Sometimes controller time drifts with respect to the host and it is difficult to correlate host logs with controller logs. Issuing a controller reset to sync the time would impact in-flight I/O and is not a viable option.
Instead the driver now sends an IO_UNIT_CONTROL Request to sync the time periodically. This is done from the watchdog thread which gets invoked every second.
The time synchronization interval is specified in the 'TimeSyncInterval' field in Manufacturing Page11 by the controller:
TimeSyncInterval - 8 bits bits 0-6: Time stamp Synchronization interval value bit 7: Time stamp Synchronization interval unit, (if this bit is one then Timestamp Synchronization interval value is specified in terms of hours else Timestamp Synchronization interval value is specified in terms of minutes).
The driver keeps track of the timer using IOC's timestamp_update_count field. This field value gets incremented whenever the watchdog thread gets invoked. And whenever this field value is greater than or equal to the Time Stamp Synchronization interval value, the driver sends the IO_UNIT_CONTROL Request message to controller to update the time and then it resets the timestamp_update_count field to zero.
Link: https://lore.kernel.org/r/20201126094311.8686-2-suganath-prabu.subramani@bro... Reported-by: kernel test robot lkp@intel.com Signed-off-by: Suganath Prabu S suganath-prabu.subramani@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Integrated-by: Siyu Zhang siyu.zhang@windriver.com --- drivers/scsi/mpt3sas/mpt3sas_base.c | 93 ++++++++++++++++++++++++++++- drivers/scsi/mpt3sas/mpt3sas_base.h | 14 ++++- 2 files changed, 104 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 58024699eeaf..37dc537c3c1d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -596,6 +596,71 @@ static int mpt3sas_remove_dead_ioc_func(void *arg) return 0; }
+/** + * _base_sync_drv_fw_timestamp - Sync Drive-Fw TimeStamp. + * @ioc: Per Adapter Object + * + * Return nothing. + */ +static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26IoUnitControlRequest_t *mpi_request; + Mpi26IoUnitControlReply_t *mpi_reply; + u16 smid; + ktime_t current_time; + u64 TimeStamp = 0; + u8 issue_reset = 0; + + mutex_lock(&ioc->scsih_cmds.mutex); + if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) { + ioc_err(ioc, "scsih_cmd in use %s\n", __func__); + goto out; + } + ioc->scsih_cmds.status = MPT3_CMD_PENDING; + smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx); + if (!smid) { + ioc_err(ioc, "Failed obtaining a smid %s\n", __func__); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + goto out; + } + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->scsih_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t)); + mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL; + mpi_request->Operation = MPI26_CTRL_OP_SET_IOC_PARAMETER; + mpi_request->IOCParameter = MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP; + current_time = ktime_get_real(); + TimeStamp = ktime_to_ms(current_time); + mpi_request->Reserved7 = cpu_to_le32(TimeStamp & 0xFFFFFFFF); + mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp >> 32); + init_completion(&ioc->scsih_cmds.done); + ioc->put_smid_default(ioc, smid); + dinitprintk(ioc, ioc_info(ioc, + "Io Unit Control Sync TimeStamp (sending), @time %lld ms\n", + TimeStamp)); + wait_for_completion_timeout(&ioc->scsih_cmds.done, + MPT3SAS_TIMESYNC_TIMEOUT_SECONDS*HZ); + if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) { + mpt3sas_check_cmd_timeout(ioc, + ioc->scsih_cmds.status, mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4, issue_reset); + goto issue_host_reset; + } + if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) { + mpi_reply = ioc->scsih_cmds.reply; + dinitprintk(ioc, ioc_info(ioc, + "Io Unit Control sync timestamp (complete): ioc_status(0x%04x), loginfo(0x%08x)\n", + le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo))); + } +issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; +out: + mutex_unlock(&ioc->scsih_cmds.mutex); +} + /** * _base_fault_reset_work - workq handling ioc fault conditions * @work: input argument, used to derive ioc @@ -720,7 +785,11 @@ _base_fault_reset_work(struct work_struct *work) return; /* don't rearm timer */ } ioc->ioc_coredump_loop = 0; - + if (ioc->time_sync_interval && + ++ioc->timestamp_update_count >= ioc->time_sync_interval) { + ioc->timestamp_update_count = 0; + _base_sync_drv_fw_timestamp(ioc); + } spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); rearm_timer: if (ioc->fault_reset_work_q) @@ -744,6 +813,7 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) if (ioc->fault_reset_work_q) return;
+ ioc->timestamp_update_count = 0; /* initialize fault polling */
INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); @@ -4762,7 +4832,24 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) else ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO; } - + ioc->time_sync_interval = + ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_MASK; + if (ioc->time_sync_interval) { + if (ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_UNIT_MASK) + ioc->time_sync_interval = + ioc->time_sync_interval * SECONDS_PER_HOUR; + else + ioc->time_sync_interval = + ioc->time_sync_interval * SECONDS_PER_MIN; + dinitprintk(ioc, ioc_info(ioc, + "Driver-FW TimeSync interval is %d seconds. ManuPg11 TimeSync Unit is in %s\n", + ioc->time_sync_interval, (ioc->manu_pg11.TimeSyncInterval & + MPT3SAS_TIMESYNC_UNIT_MASK) ? "Hour" : "Minute")); + } else { + if (ioc->is_gen35_ioc) + ioc_warn(ioc, + "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n"); + } mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); @@ -6474,6 +6561,8 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc) r = -EIO; }
+ /* Reset TimeSync Counter*/ + ioc->timestamp_update_count = 0; return r; }
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index c5ab29d48e25..a250add2797d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -93,6 +93,14 @@ /* CoreDump: Default timeout */ #define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS (15) /*15 seconds*/ #define MPT3SAS_COREDUMP_LOOP_DONE (0xFF) +#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS (10) /* 10 seconds */ +#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL (900) /* 15 minutes */ +#define MPT3SAS_TIMESYNC_UNIT_MASK (0x80) /* bit 7 */ +#define MPT3SAS_TIMESYNC_MASK (0x7F) /* 0 - 6 bits */ +#define SECONDS_PER_MIN (60) +#define SECONDS_PER_HOUR (3600) +#define MPT3SAS_COREDUMP_LOOP_DONE (0xFF) +#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP (0x81)
/* * Set MPT3SAS_SG_DEPTH value based on user input. @@ -405,7 +413,7 @@ struct Mpi2ManufacturingPage11_t { u16 HostTraceBufferMaxSizeKB; /* 50h */ u16 HostTraceBufferMinSizeKB; /* 52h */ u8 CoreDumpTOSec; /* 54h */ - u8 Reserved8; /* 55h */ + u8 TimeSyncInterval; /* 55h */ u16 Reserved9; /* 56h */ __le32 Reserved10; /* 58h */ }; @@ -1113,6 +1121,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @cpu_msix_table_sz: table size * @total_io_cnt: Gives total IO count, used to load balance the interrupts * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state + * @timestamp_update_count: Counter to fire timeSync command + * time_sync_interval: Time sync interval read from man page 11 * @high_iops_outstanding: used to load balance the interrupts * within high iops reply queues * @msix_load_balance: Enables load balancing of interrupts across @@ -1308,6 +1318,8 @@ struct MPT3SAS_ADAPTER { MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; u32 non_operational_loop; u8 ioc_coredump_loop; + u32 timestamp_update_count; + u32 time_sync_interval; atomic64_t total_io_cnt; atomic64_t high_iops_outstanding; bool msix_load_balance;