When doing "cat /proc/interrupts" after qxl.ko is unloaded, an oops occurs:
BUG: unable to handle page fault for address: ffffffffc0274769 PGD 2a0d067 P4D 2a0d067 PUD 2a0f067 PMD 103f39067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 246 Comm: cat Not tainted 6.1.0-rc2 #24 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:string_nocheck+0x34/0x50 Code: 66 85 c0 74 3c 83 e8 01 4c 8d 5c 07 01 31 c0 eb 19 49 39 fa 76 03 44 88 07 48 83 c7 RSP: 0018:ffffc90000893bb8 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffc90000893c50 RCX: ffff0a00ffffff04 RDX: ffffffffc0274769 RSI: ffff888102812000 RDI: ffff88810281133e RBP: ffff888102812000 R08: ffffffff823fa5e6 R09: 0000000000000007 R10: ffff888102812000 R11: ffff88820281133d R12: ffffffffc0274769 R13: ffff0a00ffffff04 R14: 0000000000000cc4 R15: ffffffff823276b4 FS: 000000000214f8c0(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc0274769 CR3: 00000001025c4005 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> string+0x46/0x60 vsnprintf+0x27a/0x4f0 seq_vprintf+0x34/0x50 seq_printf+0x53/0x70 ? seq_read_iter+0x365/0x450 show_interrupts+0x259/0x330 seq_read_iter+0x2a3/0x450 proc_reg_read_iter+0x47/0x70 generic_file_splice_read+0x94/0x160 splice_direct_to_actor+0xb0/0x230 ? do_splice_direct+0xd0/0xd0 do_splice_direct+0x8b/0xd0 do_sendfile+0x345/0x4f0 __x64_sys_sendfile64+0xa1/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4bb0ce Code: c3 0f 1f 00 4c 89 d2 4c 89 c6 e9 bd fd ff ff 0f 1f 44 00 00 31 c0 c3 0f 1f 44 00 00 RSP: 002b:00007ffd99dc3fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000001000000 RCX: 00000000004bb0ce RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001 RBP: 0000000000000001 R08: 000000000068f240 R09: 0000000001000000 R10: 0000000001000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 </TASK>
It seems that qxl doesn't free the interrupt it requests during unload, fix this by adding the missing free_irq().
Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)") Signed-off-by: Wei Li liwei391@huawei.com --- drivers/gpu/drm/qxl/qxl_kms.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index dc3828db1991..d591084824de 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -283,6 +283,8 @@ int qxl_device_init(struct qxl_device *qdev, void qxl_device_fini(struct qxl_device *qdev) { int cur_idx; + struct drm_device *ddev = &qdev->ddev; + struct pci_dev *pdev = to_pci_dev(ddev->dev);
/* check if qxl_device_init() was successful (gc_work is initialized last) */ if (!qdev->gc_work.func) @@ -305,6 +307,7 @@ void qxl_device_fini(struct qxl_device *qdev) wait_event_timeout(qdev->release_event, atomic_read(&qdev->release_count) == 0, HZ); + free_irq(pdev->irq, ddev); flush_work(&qdev->gc_work); qxl_surf_evict(qdev); qxl_vram_evict(qdev);