From: Qi Liu liuqi115@huawei.com
driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7BNF8 CVE: NA
----------------------------------------------------------------------
A WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log:
WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]---
During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING.
So we add the slave_destroy interface, to make sure link is removed after flush workque.
Fixes: 16fd4a7c59170 ("scsi: hisi_sas: Add device link between SCSI devices and hisi_hba") Signed-off-by: Qi Liu liuqi115@huawei.com Signed-off-by: xiabing xiabing12@h-partners.com --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 22c4ba835bda..8fcca9af507b 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2870,7 +2870,8 @@ static int slave_configure_v3_hw(struct scsi_device *sdev) return 0;
if (!device_link_add(&sdev->sdev_gendev, dev, - DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE)) { + DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | + DL_FLAG_RPM_ACTIVE)) { if (pm_runtime_enabled(dev)) { dev_info(dev, "add device link failed, disable runtime PM for the host\n"); pm_runtime_disable(dev); @@ -2880,6 +2881,15 @@ static int slave_configure_v3_hw(struct scsi_device *sdev) return 0; }
+static void slave_destroy_v3_hw(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = dev_to_shost(&sdev->sdev_gendev); + struct hisi_hba *hisi_hba = shost_priv(shost); + struct device *dev = hisi_hba->dev; + + device_link_remove(&sdev->sdev_gendev, dev); +} + static struct device_attribute *host_attrs_v3_hw[] = { &dev_attr_phy_event_threshold, &dev_attr_intr_conv_v3_hw, @@ -3268,6 +3278,7 @@ static struct scsi_host_template sht_v3_hw = { .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_target_reset_handler = sas_eh_target_reset_handler, .slave_alloc = hisi_sas_slave_alloc, + .slave_destroy = slave_destroy_v3_hw, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, #ifdef CONFIG_COMPAT