From: Tali Perry tali.perry1@gmail.com
stable inclusion from stable-v5.10.137 commit 385f6ef4de3d441c546dedf1340a34a66e4a40a8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I60PLB
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 47d506d1a28fd10a9fb1f33df5622d88fae72095 ]
NPCM can support up to 10 own slave addresses. In practice, only one address is actually being used. In order to access addresses 2 and above, need to switch register banks. The switch needs spinlock. To avoid using spinlock for this useless feature removed support of SA >= 2. Also fix returned slave event enum.
Remove some comment since the bank selection is not required. The bank selection is not required since the supported slave addresses are reduced.
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry tali.perry1@gmail.com Signed-off-by: Tyrone Ting kfting@nuvoton.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Wei Li liwei391@huawei.com --- drivers/i2c/busses/i2c-npcm7xx.c | 41 +++++++++++++------------------- 1 file changed, 16 insertions(+), 25 deletions(-)
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index d9ac62c1ac25..ab31e7fb4cc9 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -123,11 +123,11 @@ enum i2c_addr { * Since the addr regs are sprinkled all over the address space, * use this array to get the address or each register. */ -#define I2C_NUM_OWN_ADDR 10 +#define I2C_NUM_OWN_ADDR 2 +#define I2C_NUM_OWN_ADDR_SUPPORTED 2 + static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = { - NPCM_I2CADDR1, NPCM_I2CADDR2, NPCM_I2CADDR3, NPCM_I2CADDR4, - NPCM_I2CADDR5, NPCM_I2CADDR6, NPCM_I2CADDR7, NPCM_I2CADDR8, - NPCM_I2CADDR9, NPCM_I2CADDR10, + NPCM_I2CADDR1, NPCM_I2CADDR2, }; #endif
@@ -391,14 +391,10 @@ static void npcm_i2c_disable(struct npcm_i2c *bus) #if IS_ENABLED(CONFIG_I2C_SLAVE) int i;
- /* select bank 0 for I2C addresses */ - npcm_i2c_select_bank(bus, I2C_BANK_0); - /* Slave addresses removal */ - for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++) + for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR_SUPPORTED; i++) iowrite8(0, bus->reg + npcm_i2caddr[i]);
- npcm_i2c_select_bank(bus, I2C_BANK_1); #endif /* Disable module */ i2cctl2 = ioread8(bus->reg + NPCM_I2CCTL2); @@ -603,8 +599,7 @@ static int npcm_i2c_slave_enable(struct npcm_i2c *bus, enum i2c_addr addr_type, i2cctl1 &= ~NPCM_I2CCTL1_GCMEN; iowrite8(i2cctl1, bus->reg + NPCM_I2CCTL1); return 0; - } - if (addr_type == I2C_ARP_ADDR) { + } else if (addr_type == I2C_ARP_ADDR) { i2cctl3 = ioread8(bus->reg + NPCM_I2CCTL3); if (enable) i2cctl3 |= I2CCTL3_ARPMEN; @@ -613,16 +608,16 @@ static int npcm_i2c_slave_enable(struct npcm_i2c *bus, enum i2c_addr addr_type, iowrite8(i2cctl3, bus->reg + NPCM_I2CCTL3); return 0; } + if (addr_type > I2C_SLAVE_ADDR2 && addr_type <= I2C_SLAVE_ADDR10) + dev_err(bus->dev, "try to enable more than 2 SA not supported\n"); + if (addr_type >= I2C_ARP_ADDR) return -EFAULT; - /* select bank 0 for address 3 to 10 */ - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_0); + /* Set and enable the address */ iowrite8(sa_reg, bus->reg + npcm_i2caddr[addr_type]); npcm_i2c_slave_int_enable(bus, enable); - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_1); + return 0; } #endif @@ -843,15 +838,11 @@ static u8 npcm_i2c_get_slave_addr(struct npcm_i2c *bus, enum i2c_addr addr_type) { u8 slave_add;
- /* select bank 0 for address 3 to 10 */ - if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_0); + if (addr_type > I2C_SLAVE_ADDR2 && addr_type <= I2C_SLAVE_ADDR10) + dev_err(bus->dev, "get slave: try to use more than 2 SA not supported\n");
slave_add = ioread8(bus->reg + npcm_i2caddr[(int)addr_type]);
- if (addr_type > I2C_SLAVE_ADDR2) - npcm_i2c_select_bank(bus, I2C_BANK_1); - return slave_add; }
@@ -861,12 +852,12 @@ static int npcm_i2c_remove_slave_addr(struct npcm_i2c *bus, u8 slave_add)
/* Set the enable bit */ slave_add |= 0x80; - npcm_i2c_select_bank(bus, I2C_BANK_0); - for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR; i++) { + + for (i = I2C_SLAVE_ADDR1; i < I2C_NUM_OWN_ADDR_SUPPORTED; i++) { if (ioread8(bus->reg + npcm_i2caddr[i]) == slave_add) iowrite8(0, bus->reg + npcm_i2caddr[i]); } - npcm_i2c_select_bank(bus, I2C_BANK_1); + return 0; }