From: Raju Rangoju Raju.Rangoju@amd.com
stable inclusion from stable-v6.6.4 commit 50173aae586c33c26b81eb6ec6bad4457d249403 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8N1WC
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 676ec53844cbdf2f47e68a076cdff7f0ec6cbe3f ]
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues.
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K Shyam-sundar.S-k@amd.com Signed-off-by: Raju Rangoju Raju.Rangoju@amd.com Reviewed-by: Wojciech Drewek wojciech.drewek@intel.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c index 32d2c6fac652..4a2dc705b528 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c @@ -1193,7 +1193,19 @@ static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata) if (pdata->phy.duplex != DUPLEX_FULL) return -EINVAL;
- xgbe_set_mode(pdata, mode); + /* Force the mode change for SFI in Fixed PHY config. + * Fixed PHY configs needs PLL to be enabled while doing mode set. + * When the SFP module isn't connected during boot, driver assumes + * AN is ON and attempts autonegotiation. However, if the connected + * SFP comes up in Fixed PHY config, the link will not come up as + * PLL isn't enabled while the initial mode set command is issued. + * So, force the mode change for SFI in Fixed PHY configuration to + * fix link issues. + */ + if (mode == XGBE_MODE_SFI) + xgbe_change_mode(pdata, mode); + else + xgbe_set_mode(pdata, mode);
return 0; }