From: Keith Busch keith.busch@intel.com
mainline inclusion from mainline-v4.20-rc1 commit f0157160b359b1d263ee9d4e0a435a7ad85bbcea category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I47H3V CVE: NA
--------------------------------
commit f0157160b359b1d263ee9d4e0a435a7ad85bbcea upstream. Backport summary: for 4.19 kernel ICX PCIe Gen4 support.
The spec has timing requirements when waiting for a link to become active after a conventional reset. Implement those hard delays when waiting for an active link so pciehp and dpc drivers don't need to duplicate this.
For devices that don't support data link layer active reporting, wait the fixed time recommended by the PCIe spec.
Signed-off-by: Keith Busch keith.busch@intel.com [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Sinan Kaya okaya@kernel.org (cherry picked from commit f0157160b359b1d263ee9d4e0a435a7ad85bbcea) Signed-off-by: Ethan Zhao haifeng.zhao@intel.com
Conflicts: drivers/pci/hotplug/pciehp.h Signed-off-by: Jackie Liu liuyun01@kylinos.cn Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Xiongfeng Wang wangxiongfeng2@huawei.com Reviewed-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/pci/hotplug/pciehp_hpc.c | 22 ++------------------- drivers/pci/pci.c | 33 ++++++++++++++++++++++++++------ drivers/pci/pcie/dpc.c | 4 +++- drivers/pci/probe.c | 1 + include/linux/pci.h | 1 + 5 files changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 202f9decca5d6..353267a48976a 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -212,13 +212,6 @@ bool pciehp_check_link_active(struct controller *ctrl) return ret; }
-static void pcie_wait_link_active(struct controller *ctrl) -{ - struct pci_dev *pdev = ctrl_dev(ctrl); - - pcie_wait_for_link(pdev, true); -} - static bool pci_bus_check_dev(struct pci_bus *bus, int devfn) { u32 l; @@ -251,18 +244,9 @@ int pciehp_check_link_status(struct controller *ctrl) bool found; u16 lnk_status;
- /* - * Data Link Layer Link Active Reporting must be capable for - * hot-plug capable downstream port. But old controller might - * not implement it. In this case, we wait for 1000 ms. - */ - if (ctrl->link_active_reporting) - pcie_wait_link_active(ctrl); - else - msleep(1000); + if (!pcie_wait_for_link(pdev, true)) + return -1;
- /* wait 100ms before read pci conf, and try in 1s */ - msleep(100); found = pci_bus_check_dev(ctrl->pcie->port->subordinate, PCI_DEVFN(0, 0));
@@ -972,8 +956,6 @@ struct controller *pcie_init(struct pcie_device *dev)
/* Check if Data Link Layer Link Active Reporting is implemented */ pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap); - if (link_cap & PCI_EXP_LNKCAP_DLLLARC) - ctrl->link_active_reporting = 1;
/* Clear all remaining event bits in Slot Status register. */ pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ce369747b67a4..ffd8a312b6a04 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4562,21 +4562,42 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active) bool ret; u16 lnk_status;
+ /* + * Some controllers might not implement link active reporting. In this + * case, we wait for 1000 + 100 ms. + */ + if (!pdev->link_active_reporting) { + msleep(1100); + return true; + } + + /* + * PCIe r4.0 sec 6.6.1, a component must enter LTSSM Detect within 20ms, + * after which we should expect an link active if the reset was + * successful. If so, software must wait a minimum 100ms before sending + * configuration requests to devices downstream this port. + * + * If the link fails to activate, either the device was physically + * removed or the link is permanently failed. + */ + if (active) + msleep(20); for (;;) { pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); if (ret == active) - return true; + break; if (timeout <= 0) break; msleep(10); timeout -= 10; } - - pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", - active ? "set" : "cleared"); - - return false; + if (active && ret) + msleep(100); + else if (ret != active) + pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", + active ? "set" : "cleared"); + return ret == active; }
void pci_reset_secondary_bus(struct pci_dev *dev) diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c index f57736783c83c..7b77754a82de4 100644 --- a/drivers/pci/pcie/dpc.c +++ b/drivers/pci/pcie/dpc.c @@ -140,10 +140,12 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev) pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS, PCI_EXP_DPC_STATUS_TRIGGER);
+ if (!pcie_wait_for_link(pdev, true)) + return PCI_ERS_RESULT_DISCONNECT; + return PCI_ERS_RESULT_RECOVERED; }
- static void dpc_process_rp_pio_error(struct dpc_dev *dpc) { struct device *dev = &dpc->dev->device; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 1077f7342296b..b45bcfcf8090a 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -809,6 +809,7 @@ static void pci_set_bus_speed(struct pci_bus *bus)
pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap); bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS]; + bridge->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC);
pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta); pcie_update_link_speed(bus, linksta); diff --git a/include/linux/pci.h b/include/linux/pci.h index 19d516b4b2c69..08acb2bba764c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -410,6 +410,7 @@ struct pci_dev { unsigned int has_secondary_link:1; unsigned int non_compliant_bars:1; /* Broken BARs; ignore them */ unsigned int is_probed:1; /* Device probing in progress */ + unsigned int link_active_reporting:1;/* Device capable of reporting link active */ pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */