[PATCH 61/88] scsi: mpt3sas: Add io_uring iopoll support

From: Sreekanth Reddy sreekanth.reddy@broadcom.com

Commit 432bc7caef4eaacc1101ee2569bb870bdfeed7ce upstream.

Enable the driver to work in non-IRQ mode, i.e. there will not be any MSI-X vectors associated with queues dedicated to polling. The IOC hardware is single submission queue and multiple reply queue. However, using the shared host tagset support it is possible to simulate multiple hardware queues.

When poll_queues are enabled through the module parameter, the driver will allocate extra reply queues without an MSI-X association. All I/O completion on these queues will be done through the iopoll interface.

Link: https://lore.kernel.org/r/20210727081212.2742-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy sreekanth.reddy@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Siyu Zhang siyu.zhang@windriver.com --- drivers/scsi/mpt3sas/mpt3sas_base.c | 243 ++++++++++++++++++++++++--- drivers/scsi/mpt3sas/mpt3sas_base.h | 23 +++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 62 +++++-- 3 files changed, 296 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 152605e22b6a..9918d5c7898e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -116,6 +116,14 @@ MODULE_PARM_DESC(perf_mode, "\t\tdefault - default perf_mode is 'balanced'" );

+static int poll_queues; +module_param(poll_queues, int, 0444); +MODULE_PARM_DESC(poll_queues, "Number of queues to be use for io_uring poll mode.\n\t\t" + "This parameter is effective only if host_tagset_enable=1. &\n\t\t" + "when poll_queues are enabled then &\n\t\t" + "perf_mode is set to latency mode. &\n\t\t" + ); + enum mpt3sas_perf_mode { MPT_PERF_MODE_DEFAULT = -1, MPT_PERF_MODE_BALANCED = 0, @@ -709,6 +717,7 @@ _base_fault_reset_work(struct work_struct *work) * and this call is safe since dead ioc will never return any * command back from HW. */ + mpt3sas_base_pause_mq_polling(ioc); ioc->schedule_dead_ioc_flush_running_cmds(ioc); /* * Set remove_host flag early since kernel thread will @@ -744,6 +753,7 @@ _base_fault_reset_work(struct work_struct *work) spin_unlock_irqrestore( &ioc->ioc_reset_in_progress_lock, flags); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_pause_mq_polling(ioc); _base_clear_outstanding_commands(ioc); }

@@ -1547,6 +1557,53 @@ _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) return cb_idx; }

+/** + * mpt3sas_base_pause_mq_polling - pause polling on the mq poll queues + * when driver is flushing out the IOs. + * @ioc: per adapter object + * + * Pause polling on the mq poll (io uring) queues when driver is flushing + * out the IOs. Otherwise we may see the race condition of completing the same + * IO from two paths. + * + * Returns nothing. + */ +void +mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc) +{ + int iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + int qid; + + for (qid = 0; qid < iopoll_q_count; qid++) + atomic_set(&ioc->io_uring_poll_queues[qid].pause, 1); + + /* + * wait for current poll to complete. + */ + for (qid = 0; qid < iopoll_q_count; qid++) { + while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) + udelay(500); + } +} + +/** + * mpt3sas_base_resume_mq_polling - Resume polling on mq poll queues. + * @ioc: per adapter object + * + * Returns nothing. + */ +void +mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc) +{ + int iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + int qid; + + for (qid = 0; qid < iopoll_q_count; qid++) + atomic_set(&ioc->io_uring_poll_queues[qid].pause, 0); +} + /** * mpt3sas_base_mask_interrupts - disable interrupts * @ioc: per adapter object @@ -1722,7 +1779,8 @@ _base_process_reply_queue(struct adapter_reply_queue *reply_q) MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); } - if (!reply_q->irq_poll_scheduled) { + if (!reply_q->is_iouring_poll_q && + !reply_q->irq_poll_scheduled) { reply_q->irq_poll_scheduled = true; irq_poll_sched(&reply_q->irqpoll); } @@ -1778,6 +1836,33 @@ _base_process_reply_queue(struct adapter_reply_queue *reply_q) return completed_cmds; }

+/** + * mpt3sas_blk_mq_poll - poll the blk mq poll queue + * @shost: Scsi_Host object + * @queue_num: hw ctx queue number + * + * Return number of entries that has been processed from poll queue. + */ +int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num) +{ + struct MPT3SAS_ADAPTER *ioc = + (struct MPT3SAS_ADAPTER *)shost->hostdata; + struct adapter_reply_queue *reply_q; + int num_entries = 0; + int qid = queue_num - ioc->iopoll_q_start_index; + + if (atomic_read(&ioc->io_uring_poll_queues[qid].pause) || + !atomic_add_unless(&ioc->io_uring_poll_queues[qid].busy, 1, 1)) + return 0; + + reply_q = ioc->io_uring_poll_queues[qid].reply_q; + + num_entries = _base_process_reply_queue(reply_q); + atomic_dec(&ioc->io_uring_poll_queues[qid].busy); + + return num_entries; +} + /** * _base_interrupt - MPT adapter (IOC) specific interrupt handler. * @irq: irq number (not used) @@ -1851,6 +1936,8 @@ _base_init_irqpolls(struct MPT3SAS_ADAPTER *ioc) return;

list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { + if (reply_q->is_iouring_poll_q) + continue; irq_poll_init(&reply_q->irqpoll, ioc->hba_queue_depth/4, _base_irqpoll); reply_q->irq_poll_scheduled = false; @@ -1900,6 +1987,12 @@ mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll) /* TMs are on msix_index == 0 */ if (reply_q->msix_index == 0) continue; + + if (reply_q->is_iouring_poll_q) { + _base_process_reply_queue(reply_q); + continue; + } + synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index)); if (reply_q->irq_poll_scheduled) { /* Calling irq_poll_disable will wait for any pending @@ -2999,6 +3092,11 @@ mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc)

list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { list_del(&reply_q->list); + if (reply_q->is_iouring_poll_q) { + kfree(reply_q); + continue; + } + if (ioc->smp_affinity_enable) irq_set_affinity_hint(pci_irq_vector(ioc->pdev, reply_q->msix_index), NULL); @@ -3020,7 +3118,7 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) { struct pci_dev *pdev = ioc->pdev; struct adapter_reply_queue *reply_q; - int r; + int r, qid;

reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); if (!reply_q) { @@ -3032,6 +3130,17 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) reply_q->msix_index = index;

atomic_set(&reply_q->busy, 0); + + if (index >= ioc->iopoll_q_start_index) { + qid = index - ioc->iopoll_q_start_index; + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-mq-poll%d", + ioc->driver_name, ioc->id, qid); + reply_q->is_iouring_poll_q = 1; + ioc->io_uring_poll_queues[qid].reply_q = reply_q; + goto out; + } + + if (ioc->msix_enable) snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", ioc->driver_name, ioc->id, index); @@ -3046,7 +3155,7 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) kfree(reply_q); return -EBUSY; } - +out: INIT_LIST_HEAD(&reply_q->list); list_add_tail(&reply_q->list, &ioc->reply_queue_list); return 0; @@ -3067,6 +3176,8 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) unsigned int cpu, nr_cpus, nr_msix, index = 0; struct adapter_reply_queue *reply_q; int local_numa_node; + int iopoll_q_count = ioc->reply_queue_count - + ioc->iopoll_q_start_index;

if (!_base_is_controller_msix_enabled(ioc)) return; @@ -3100,7 +3211,8 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { const cpumask_t *mask;

- if (reply_q->msix_index < ioc->high_iops_queues) + if (reply_q->msix_index < ioc->high_iops_queues || + reply_q->msix_index >= ioc->iopoll_q_start_index) continue;

mask = pci_irq_get_affinity(ioc->pdev, @@ -3122,13 +3234,14 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)

fall_back: cpu = cpumask_first(cpu_online_mask); - nr_msix -= ioc->high_iops_queues; + nr_msix -= (ioc->high_iops_queues - iopoll_q_count); index = 0;

list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { unsigned int i, group = nr_cpus / nr_msix;

- if (reply_q->msix_index < ioc->high_iops_queues) + if (reply_q->msix_index < ioc->high_iops_queues || + reply_q->msix_index >= ioc->iopoll_q_start_index) continue;

if (cpu >= nr_cpus) @@ -3165,8 +3278,12 @@ _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, { u16 lnksta, speed;

+ /* + * Disable high iops queues if io uring poll queues are enabled. + */ if (perf_mode == MPT_PERF_MODE_IOPS || - perf_mode == MPT_PERF_MODE_LATENCY) { + perf_mode == MPT_PERF_MODE_LATENCY || + ioc->io_uring_poll_queues) { ioc->high_iops_queues = 0; return; } @@ -3203,6 +3320,7 @@ mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) return; pci_free_irq_vectors(ioc->pdev); ioc->msix_enable = 0; + kfree(ioc->io_uring_poll_queues); }

/** @@ -3216,18 +3334,24 @@ _base_alloc_irq_vectors(struct MPT3SAS_ADAPTER *ioc) int i, irq_flags = PCI_IRQ_MSIX; struct irq_affinity desc = { .pre_vectors = ioc->high_iops_queues }; struct irq_affinity *descp = &desc; + /* + * Don't allocate msix vectors for poll_queues. + * msix_vectors is always within a range of FW supported reply queue. + */ + int nr_msix_vectors = ioc->iopoll_q_start_index; +

if (ioc->smp_affinity_enable) - irq_flags |= PCI_IRQ_AFFINITY; + irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES; else descp = NULL;

- ioc_info(ioc, " %d %d\n", ioc->high_iops_queues, - ioc->reply_queue_count); + ioc_info(ioc, " %d %d %d\n", ioc->high_iops_queues, + ioc->reply_queue_count, nr_msix_vectors);

i = pci_alloc_irq_vectors_affinity(ioc->pdev, ioc->high_iops_queues, - ioc->reply_queue_count, irq_flags, descp); + nr_msix_vectors, irq_flags, descp);

return i; } @@ -3243,6 +3367,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) int r; int i, local_max_msix_vectors; u8 try_msix = 0; + int iopoll_q_count = 0;

ioc->msix_load_balance = false;

@@ -3258,22 +3383,16 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count); pr_info("\t no of cores: %d, max_msix_vectors: %d\n", ioc->cpu_count, max_msix_vectors); - if (ioc->is_aero_ioc) - _base_check_and_enable_high_iops_queues(ioc, - ioc->msix_vector_count); + ioc->reply_queue_count = - min_t(int, ioc->cpu_count + ioc->high_iops_queues, - ioc->msix_vector_count); + min_t(int, ioc->cpu_count, ioc->msix_vector_count);

if (!ioc->rdpq_array_enable && max_msix_vectors == -1) local_max_msix_vectors = (reset_devices) ? 1 : 8; else local_max_msix_vectors = max_msix_vectors;

- if (local_max_msix_vectors > 0) - ioc->reply_queue_count = min_t(int, local_max_msix_vectors, - ioc->reply_queue_count); - else if (local_max_msix_vectors == 0) + if (local_max_msix_vectors == 0) goto try_ioapic;

/* @@ -3294,14 +3413,77 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) if (ioc->msix_load_balance) ioc->smp_affinity_enable = 0;

+ if (!ioc->smp_affinity_enable || ioc->reply_queue_count <= 1) + ioc->shost->host_tagset = 0; + + /* + * Enable io uring poll queues only if host_tagset is enabled. + */ + if (ioc->shost->host_tagset) + iopoll_q_count = poll_queues; + + if (iopoll_q_count) { + ioc->io_uring_poll_queues = kcalloc(iopoll_q_count, + sizeof(struct io_uring_poll_queue), GFP_KERNEL); + if (!ioc->io_uring_poll_queues) + iopoll_q_count = 0; + } + + if (ioc->is_aero_ioc) + _base_check_and_enable_high_iops_queues(ioc, + ioc->msix_vector_count); + + /* + * Add high iops queues count to reply queue count if high iops queues + * are enabled. + */ + ioc->reply_queue_count = min_t(int, + ioc->reply_queue_count + ioc->high_iops_queues, + ioc->msix_vector_count); + + /* + * Adjust the reply queue count incase reply queue count + * exceeds the user provided MSIx vectors count. + */ + if (local_max_msix_vectors > 0) + ioc->reply_queue_count = min_t(int, local_max_msix_vectors, + ioc->reply_queue_count); + /* + * Add io uring poll queues count to reply queues count + * if io uring is enabled in driver. + */ + if (iopoll_q_count) { + if (ioc->reply_queue_count < (iopoll_q_count + MPT3_MIN_IRQS)) + iopoll_q_count = 0; + ioc->reply_queue_count = min_t(int, + ioc->reply_queue_count + iopoll_q_count, + ioc->msix_vector_count); + } + + /* + * Starting index of io uring poll queues in reply queue list. + */ + ioc->iopoll_q_start_index = + ioc->reply_queue_count - iopoll_q_count; + r = _base_alloc_irq_vectors(ioc); if (r < 0) { ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r); goto try_ioapic; }

+ /* + * Adjust the reply queue count if the allocated + * MSIx vectors is less then the requested number + * of MSIx vectors. + */ + if (r < ioc->iopoll_q_start_index) { + ioc->reply_queue_count = r + iopoll_q_count; + ioc->iopoll_q_start_index = + ioc->reply_queue_count - iopoll_q_count; + } + ioc->msix_enable = 1; - ioc->reply_queue_count = r; for (i = 0; i < ioc->reply_queue_count; i++) { r = _base_request_irq(ioc, i); if (r) { @@ -3321,6 +3503,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) ioc->high_iops_queues = 0; ioc_info(ioc, "High IOPs queues : disabled\n"); ioc->reply_queue_count = 1; + ioc->iopoll_q_start_index = ioc->reply_queue_count - 0; r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY); if (r < 0) { dfailprintk(ioc, @@ -3417,6 +3600,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) u64 pio_chip = 0; phys_addr_t chip_phys = 0; struct adapter_reply_queue *reply_q; + int iopoll_q_count = 0;

dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));

@@ -3490,6 +3674,12 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_fail;

+ iopoll_q_count = ioc->reply_queue_count - ioc->iopoll_q_start_index; + for (i = 0; i < iopoll_q_count; i++) { + atomic_set(&ioc->io_uring_poll_queues[i].busy, 0); + atomic_set(&ioc->io_uring_poll_queues[i].pause, 0); + } + if (!ioc->is_driver_loading) _base_init_irqpolls(ioc); /* Use the Combined reply queue feature only for SAS3 C0 & higher @@ -3531,11 +3721,18 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) * 4))); }

- list_for_each_entry(reply_q, &ioc->reply_queue_list, list) + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + if (reply_q->msix_index >= ioc->iopoll_q_start_index) { + pr_info("%s: enabled: index: %d\n", + reply_q->name, reply_q->msix_index); + continue; + } + pr_info("%s: %s enabled: IRQ %d\n", reply_q->name, ioc->msix_enable ? "PCI-MSI-X" : "IO-APIC", pci_irq_vector(ioc->pdev, reply_q->msix_index)); + }

ioc_info(ioc, "iomem(%pap), mapped(0x%p), size(%d)\n", &chip_phys, ioc->chip, memap_sz); @@ -8472,6 +8669,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, _base_pre_reset_handler(ioc); mpt3sas_wait_for_commands_to_complete(ioc); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_pause_mq_polling(ioc); r = mpt3sas_base_make_ioc_ready(ioc, type); if (r) goto out; @@ -8513,6 +8711,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); ioc->ioc_reset_count++; mutex_unlock(&ioc->reset_in_progress_mutex); + mpt3sas_base_resume_mq_polling(ioc);

out_unlocked: if ((r == 0) && is_trigger) { diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 0c6c3df0038d..c15c567d55e2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -354,6 +354,7 @@ struct mpt3sas_nvme_cmd { #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3 12 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35 16 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10) +#define MPT3_MIN_IRQS 1

/* OEM Identifiers */ #define MFG10_OEM_ID_INVALID (0x00000000) @@ -936,6 +937,8 @@ struct _event_ack_list { * @os_irq: irq number * @irqpoll: irq_poll object * @irq_poll_scheduled: Tells whether irq poll is scheduled or not + * @is_iouring_poll_q: Tells whether reply queues is assigned + * to io uring poll queues or not * @list: this list */ struct adapter_reply_queue { @@ -949,9 +952,22 @@ struct adapter_reply_queue { struct irq_poll irqpoll; bool irq_poll_scheduled; bool irq_line_enable; + bool is_iouring_poll_q; struct list_head list; };

+/** + * struct io_uring_poll_queue - the io uring poll queue structure + * @busy: Tells whether io uring poll queue is busy or not + * @pause: Tells whether IOs are paused on io uring poll queue or not + * @reply_q: reply queue mapped for io uring poll queue + */ +struct io_uring_poll_queue { + atomic_t busy; + atomic_t pause; + struct adapter_reply_queue *reply_q; +}; + typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);

/* SAS3.0 support */ @@ -1176,6 +1192,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands * @thresh_hold: Max number of reply descriptors processed * before updating Host Index + * @iopoll_q_start_index: starting index of io uring poll queues + * in reply queue list * @drv_internal_flags: Bit map internal to driver * @drv_support_bitmap: driver's supported feature bit map * @use_32bit_dma: Flag to use 32 bit consistent dma mask @@ -1372,11 +1390,13 @@ struct MPT3SAS_ADAPTER { bool msix_load_balance; u16 thresh_hold; u8 high_iops_queues; + u8 iopoll_q_start_index; u32 drv_internal_flags; u32 drv_support_bitmap; u32 dma_mask; bool enable_sdev_max_qd; bool use_32bit_dma; + struct io_uring_poll_queue *io_uring_poll_queues;

/* internal commands, callback index */ u8 scsi_io_cb_idx; @@ -1734,6 +1754,9 @@ int mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type); void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc); +int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num); +void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc);

/* scsih shared API */ struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index ab295dea9552..b8042b915e53 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11184,8 +11184,10 @@ static void scsih_remove(struct pci_dev *pdev)

ioc->remove_host = 1;

- if (!pci_device_is_present(pdev)) + if (!pci_device_is_present(pdev)) { + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); + }

_scsih_fw_event_cleanup_queue(ioc);

@@ -11280,8 +11282,10 @@ scsih_shutdown(struct pci_dev *pdev)

ioc->remove_host = 1;

- if (!pci_device_is_present(pdev)) + if (!pci_device_is_present(pdev)) { + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); + }

_scsih_fw_event_cleanup_queue(ioc);

@@ -11792,12 +11796,41 @@ static int scsih_map_queues(struct Scsi_Host *shost) { struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)shost->hostdata; + struct blk_mq_queue_map *map; + int i, qoff, offset; + int nr_msix_vectors = ioc->iopoll_q_start_index; + int iopoll_q_count = ioc->reply_queue_count - nr_msix_vectors;

- if (ioc->shost->nr_hw_queues == 1) + if (shost->nr_hw_queues == 1) return 0;

- return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT], - ioc->pdev, ioc->high_iops_queues); + for (i = 0, qoff = 0; i < shost->nr_maps; i++) { + map = &shost->tag_set.map[i]; + map->nr_queues = 0; + offset = 0; + if (i == HCTX_TYPE_DEFAULT) { + map->nr_queues = + nr_msix_vectors - ioc->high_iops_queues; + offset = ioc->high_iops_queues; + } else if (i == HCTX_TYPE_POLL) + map->nr_queues = iopoll_q_count; + + if (!map->nr_queues) + BUG_ON(i == HCTX_TYPE_DEFAULT); + + /* + * The poll queue(s) doesn't have an IRQ (and hence IRQ + * affinity), so use the regular blk-mq cpu mapping + */ + map->queue_offset = qoff; + if (i != HCTX_TYPE_POLL) + blk_mq_pci_map_queues(map, ioc->pdev, offset); + else + blk_mq_map_queues(map); + + qoff += map->nr_queues; + } + return 0; }

/* shost template for SAS 2.0 HBA devices */ @@ -11868,6 +11901,7 @@ static struct scsi_host_template mpt3sas_driver_template = { .track_queue_depth = 1, .cmd_size = sizeof(struct scsiio_tracker), .map_queues = scsih_map_queues, + .mq_poll = mpt3sas_blk_mq_poll, };

/* raid transport support for SAS 3.0 HBA devices */ @@ -11964,6 +11998,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct Scsi_Host *shost = NULL; int rv; u16 hba_mpi_version; + int iopoll_q_count = 0;

/* Determine in which MPI version class this pci device belongs */ hba_mpi_version = _scsih_determine_hba_mpi_version(pdev); @@ -12211,6 +12246,11 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_thread_fail; }

+ shost->host_tagset = 0; + + if (ioc->is_gen35_ioc && host_tagset_enable) + shost->host_tagset = 1; + ioc->is_driver_loading = 1; if ((mpt3sas_base_attach(ioc))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -12233,16 +12273,17 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) } else ioc->hide_drives = 0;

- shost->host_tagset = 0; shost->nr_hw_queues = 1;

- if (ioc->is_gen35_ioc && ioc->reply_queue_count > 1 && - host_tagset_enable && ioc->smp_affinity_enable) { - - shost->host_tagset = 1; + if (shost->host_tagset) { shost->nr_hw_queues = ioc->reply_queue_count - ioc->high_iops_queues;

+ iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + + shost->nr_maps = iopoll_q_count ? 3 : 1; + dev_info(&ioc->pdev->dev, "Max SCSIIO MPT commands: %d shared with nr_hw_queues = %d\n", shost->can_queue, shost->nr_hw_queues); @@ -12366,6 +12407,7 @@ scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) /* Permanent error, prepare for device removal */ ioc->pci_error_recovery = 1; mpt3sas_base_stop_watchdog(ioc); + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); return PCI_ERS_RESULT_DISCONNECT; }