From: Jagan Teki jagan@amarulasolutions.com
stable inclusion from stable-v6.6.33 commit 45755ef11f0337110105d4a6a2cd6bdc278dffa0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAD6H2
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit e18aeeda0b6905c333df5a0566b99f5c84426098 ]
For a given bridge pipeline if any bridge sets pre_enable_prev_first flag then the pre_enable for the previous bridge will be called before pre_enable of this bridge and opposite is done for post_disable.
These are the potential bridge flags to alter bridge init order in order to satisfy the MIPI DSI host and downstream panel or bridge to function. However the existing pre_enable_prev_first logic with associated bridge ordering has broken for both pre_enable and post_disable calls.
[pre_enable]
The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag.
Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder
In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flag on each iteration and assigned the previou bridge to limit pointer if the bridge doesn't enable pre_enable_prev_first flags.
If control found Bridge 2 is pre_enable_prev_first then the iteration looks for Bridge 3 and found it is not pre_enable_prev_first and assigns it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3 and Bridge 2 and assign iter pointer with limit which is Bridge 4.
Here is the actual problem, for the next iteration control look for Bridge 5 instead of Bridge 4 has iter pointer in previous iteration moved to Bridge 4 so this iteration skips the Bridge 4. The iteration found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned to Encoder. From next iteration Encoder skips as it is the last bridge for reverse order pipeline.
So, the resulting pre_enable bridge order would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5.
This patch fixes this by assigning limit to next pointer instead of previous bridge since the iteration always looks for bridge that does NOT request prev so assigning next makes sure the last bridge on a given iteration what exactly the limit bridge is.
So, the resulting pre_enable bridge order with fix would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder.
[post_disable]
The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag.
Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder
In this example Bridge 5 and Bridge 4 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flags on each iteration and assigned the previou bridge to next and next to limit pointer if the bridge does enable pre_enable_prev_first flag.
If control starts from Bridge 6 then it found next Bridge 5 is pre_enable_prev_first and immediately the next assigned to previous Bridge 6 and limit assignments to next Bridge 6 and call post_enable of Bridge 6 even though the next consecutive Bridge 5 is enabled with pre_enable_prev_first. This clearly misses the logic to find the state of next conducive bridge as everytime the next and limit assigns previous bridge if given bridge enabled pre_enable_prev_first.
So, the resulting post_disable bridge order would be, - Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1, Panel.
This patch fixes this by assigning next with previou bridge only if the bridge doesn't enable pre_enable_prev_first flag and the next further assign it to limit. This way we can find the bridge that NOT requested prev to disable last.
So, the resulting pre_enable bridge order with fix would be, - Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1, Panel.
Validated the bridge init ordering by incorporating dummy bridges in the sun6i-mipi-dsi pipeline
Fixes: 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order") Signed-off-by: Jagan Teki jagan@amarulasolutions.com Tested-by: Michael Trimarchi michael@amarulasolutions.com Reviewed-by: Dave Stevenson dave.stevenson@raspberrypi.com Signed-off-by: Robert Foss rfoss@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan... Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Wang Hai wanghai38@huawei.com --- drivers/gpu/drm/drm_bridge.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c index 67354afbd716..62d8a291c49c 100644 --- a/drivers/gpu/drm/drm_bridge.c +++ b/drivers/gpu/drm/drm_bridge.c @@ -687,11 +687,17 @@ void drm_atomic_bridge_chain_post_disable(struct drm_bridge *bridge, */ list_for_each_entry_from(next, &encoder->bridge_chain, chain_node) { - if (next->pre_enable_prev_first) { + if (!next->pre_enable_prev_first) { next = list_prev_entry(next, chain_node); limit = next; break; } + + if (list_is_last(&next->chain_node, + &encoder->bridge_chain)) { + limit = next; + break; + } }
/* Call these bridges in reverse order */ @@ -774,7 +780,7 @@ void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge, /* Found first bridge that does NOT * request prev to be enabled first */ - limit = list_prev_entry(next, chain_node); + limit = next; break; } }