From: Jianyong Wu jianyong.wu@arm.com
mainline inclusion from mainline-v5.13-rc1 commit 300bb1fe767183a1ca1dadf691409c53c4ecff4b category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8DWT1 CVE: NA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
--------------------------------
Currently, there is no mechanism to keep time sync between guest and host in arm/arm64 virtualization environment. Time in guest will drift compared with host after boot up as they may both use third party time sources to correct their time respectively. The time deviation will be in order of milliseconds. But in some scenarios,like in cloud environment, we ask for higher time precision.
kvm ptp clock, which chooses the host clock source as a reference clock to sync time between guest and host, has been adopted by x86 which takes the time sync order from milliseconds to nanoseconds.
This patch enables kvm ptp clock for arm/arm64 and improves clock sync precision significantly.
Test result comparisons between with kvm ptp clock and without it in arm/arm64 are as follows. This test derived from the result of command 'chronyc sources'. we should take more care of the last sample column which shows the offset between the local clock and the source at the last measurement.
no kvm ptp in guest: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* dns1.synet.edu.cn 2 6 377 13 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 21 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 29 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 37 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 45 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 53 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 61 +1040us[+1581us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 4 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 12 -130us[ +796us] +/- 21ms ^* dns1.synet.edu.cn 2 6 377 20 -130us[ +796us] +/- 21ms
in host: MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== ^* 120.25.115.20 2 7 377 72 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 92 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 112 -470us[ -603us] +/- 18ms ^* 120.25.115.20 2 7 377 2 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 22 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 43 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 63 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 83 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 103 +872ns[-6808ns] +/- 17ms ^* 120.25.115.20 2 7 377 123 +872ns[-6808ns] +/- 17ms
The dns1.synet.edu.cn is the network reference clock for guest and 120.25.115.20 is the network reference clock for host. we can't get the clock error between guest and host directly, but a roughly estimated value will be in order of hundreds of us to ms.
with kvm ptp in guest: chrony has been disabled in host to remove the disturb by network clock.
MS Name/IP address Stratum Poll Reach LastRx Last sample ======================================================================== * PHC0 0 3 377 8 -7ns[ +1ns] +/- 3ns * PHC0 0 3 377 8 +1ns[ +16ns] +/- 3ns * PHC0 0 3 377 6 -4ns[ -0ns] +/- 6ns * PHC0 0 3 377 6 -8ns[ -12ns] +/- 5ns * PHC0 0 3 377 5 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 13 +2ns[ +4ns] +/- 4ns * PHC0 0 3 377 12 -4ns[ -6ns] +/- 4ns * PHC0 0 3 377 11 -8ns[ -11ns] +/- 6ns * PHC0 0 3 377 10 -14ns[ -20ns] +/- 4ns * PHC0 0 3 377 8 +4ns[ +5ns] +/- 4ns
The PHC0 is the ptp clock which choose the host clock as its source clock. So we can see that the clock difference between host and guest is in order of ns.
Cc: Mark Rutland mark.rutland@arm.com Acked-by: Richard Cochran richardcochran@gmail.com Signed-off-by: Jianyong Wu jianyong.wu@arm.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20201209060932.212364-8-jianyong.wu@arm.com Signed-off-by: Kunkun Jiang jiangkunkun@huawei.com Signed-off-by: Dongxu Sun sundongxu3@huawei.com --- drivers/clocksource/arm_arch_timer.c | 34 ++++++++++++++++++++++++++++ drivers/ptp/Kconfig | 2 +- drivers/ptp/Makefile | 1 + drivers/ptp/ptp_kvm_arm.c | 28 +++++++++++++++++++++++ 4 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 drivers/ptp/ptp_kvm_arm.c
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index d01c70d45c3f..3cc8c7d4c7df 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -25,6 +25,8 @@ #include <linux/sched/clock.h> #include <linux/sched_clock.h> #include <linux/acpi.h> +#include <linux/arm-smccc.h> +#include <linux/ptp_kvm.h>
#include <asm/arch_timer.h> #include <asm/virt.h> @@ -1723,3 +1725,35 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table) } TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init); #endif + +int kvm_arch_ptp_get_crosststamp(u64 *cycle, struct timespec64 *ts, + struct clocksource **cs) +{ + struct arm_smccc_res hvc_res; + u32 ptp_counter; + ktime_t ktime; + + if (!IS_ENABLED(CONFIG_HAVE_ARM_SMCCC_DISCOVERY)) + return -EOPNOTSUPP; + + if (arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) + ptp_counter = KVM_PTP_VIRT_COUNTER; + else + ptp_counter = KVM_PTP_PHYS_COUNTER; + + arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID, + ptp_counter, &hvc_res); + + if ((int)(hvc_res.a0) < 0) + return -EOPNOTSUPP; + + ktime = (u64)hvc_res.a0 << 32 | hvc_res.a1; + *ts = ktime_to_timespec64(ktime); + if (cycle) + *cycle = (u64)hvc_res.a2 << 32 | hvc_res.a3; + if (cs) + *cs = &clocksource_counter; + + return 0; +} +EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_crosststamp); diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index cf64c3e8fb86..e834648d141c 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -109,7 +109,7 @@ config PTP_1588_CLOCK_PCH config PTP_1588_CLOCK_KVM tristate "KVM virtual PTP clock" depends on PTP_1588_CLOCK - depends on KVM_GUEST && X86 + depends on (KVM_GUEST && X86) || (HAVE_ARM_SMCCC_DISCOVERY && ARM_ARCH_TIMER) default y help This driver adds support for using kvm infrastructure as a PTP diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile index c62723b9edf5..67e260be595b 100644 --- a/drivers/ptp/Makefile +++ b/drivers/ptp/Makefile @@ -5,6 +5,7 @@
ptp-y := ptp_clock.o ptp_chardev.o ptp_sysfs.o ptp_kvm-$(CONFIG_X86) := ptp_kvm_x86.o ptp_kvm_common.o +ptp_kvm-$(CONFIG_HAVE_ARM_SMCCC) := ptp_kvm_arm.o ptp_kvm_common.o obj-$(CONFIG_PTP_1588_CLOCK) += ptp.o obj-$(CONFIG_PTP_1588_CLOCK_DTE) += ptp_dte.o obj-$(CONFIG_PTP_1588_CLOCK_INES) += ptp_ines.o diff --git a/drivers/ptp/ptp_kvm_arm.c b/drivers/ptp/ptp_kvm_arm.c new file mode 100644 index 000000000000..b7d28c8dfb84 --- /dev/null +++ b/drivers/ptp/ptp_kvm_arm.c @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Virtual PTP 1588 clock for use with KVM guests + * Copyright (C) 2019 ARM Ltd. + * All Rights Reserved + */ + +#include <linux/arm-smccc.h> +#include <linux/ptp_kvm.h> + +#include <asm/arch_timer.h> +#include <asm/hypervisor.h> + +int kvm_arch_ptp_init(void) +{ + int ret; + + ret = kvm_arm_hyp_service_available(ARM_SMCCC_KVM_FUNC_PTP); + if (ret <= 0) + return -EOPNOTSUPP; + + return 0; +} + +int kvm_arch_ptp_get_clock(struct timespec64 *ts) +{ + return kvm_arch_ptp_get_crosststamp(NULL, ts, NULL); +}