From: Wesley Cheng wcheng@codeaurora.org
mainline inclusion from mainline-5.10.62 commit 01da7c1dc4cfc3332351037b12adcc8bb355095b bugzilla: 182217 https://gitee.com/openeuler/kernel/issues/I4EFOS
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
--------------------------------
commit 4a1e25c0a029b97ea4a3d423a6392bfacc3b2e39 upstream.
During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error:
dwc3 a600000.dwc3: timed out waiting for SETUP phase
If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete.
Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage.
Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: stable@vger.kernel.org Reviewed-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Acked-by: Felipe Balbi balbi@kernel.org Signed-off-by: Wesley Cheng wcheng@codeaurora.org Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Chen Jun chenjun102@huawei.com Acked-by: Weilong Chen chenweilong@huawei.com
Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/usb/dwc3/gadget.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 820b9b76af40..b75fe568096f 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2125,10 +2125,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
ret = wait_for_completion_timeout(&dwc->ep0_in_setup, msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); - if (ret == 0) { - dev_err(dwc->dev, "timed out waiting for SETUP phase\n"); - return -ETIMEDOUT; - } + if (ret == 0) + dev_warn(dwc->dev, "timed out waiting for SETUP phase\n"); }
/* @@ -2332,6 +2330,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; dwc->link_state = DWC3_LINK_STATE_SS_DIS; + dwc->delayed_status = false; dwc3_ep0_out_start(dwc);
dwc3_gadget_enable_irq(dwc);