From: Sean Keely Sean.Keely@amd.com
stable inclusion from stable-5.10.67 commit 0e9f4492219f8f991163691aad43897da8478c4e bugzilla: 182619 https://gitee.com/openeuler/kernel/issues/I4EWO7
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 1ec06c2dee679e9f089e78ed20cb74ee90155f61 ]
On systems with multiple SH per SE compute_static_thread_mgmt_se# is split into independent masks, one for each SH, in the upper and lower 16 bits. We need to detect this and apply cu masking to each SH. The cu mask bits are assigned first to each SE, then to alternate SHs, then finally to higher CU id. This ensures that the maximum number of SPIs are engaged as early as possible while balancing CU assignment to each SH.
v2: Use max SH/SE rather than max SH in cu_per_sh.
v3: Fix comment blocks, ensure se_mask is initially zero filled, and correctly assign se.sh.cu positions to unset bits in cu_mask.
Signed-off-by: Sean Keely Sean.Keely@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Chen Jun chenjun102@huawei.com Acked-by: Weilong Chen chenweilong@huawei.com
Signed-off-by: Chen Jun chenjun102@huawei.com --- drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c | 84 +++++++++++++++----- drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h | 1 + 2 files changed, 64 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c index 88813dad731f..c021519af810 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c @@ -98,36 +98,78 @@ void mqd_symmetrically_map_cu_mask(struct mqd_manager *mm, uint32_t *se_mask) { struct kfd_cu_info cu_info; - uint32_t cu_per_se[KFD_MAX_NUM_SE] = {0}; - int i, se, sh, cu = 0; - + uint32_t cu_per_sh[KFD_MAX_NUM_SE][KFD_MAX_NUM_SH_PER_SE] = {0}; + int i, se, sh, cu; amdgpu_amdkfd_get_cu_info(mm->dev->kgd, &cu_info);
if (cu_mask_count > cu_info.cu_active_number) cu_mask_count = cu_info.cu_active_number;
+ /* Exceeding these bounds corrupts the stack and indicates a coding error. + * Returning with no CU's enabled will hang the queue, which should be + * attention grabbing. + */ + if (cu_info.num_shader_engines > KFD_MAX_NUM_SE) { + pr_err("Exceeded KFD_MAX_NUM_SE, chip reports %d\n", cu_info.num_shader_engines); + return; + } + if (cu_info.num_shader_arrays_per_engine > KFD_MAX_NUM_SH_PER_SE) { + pr_err("Exceeded KFD_MAX_NUM_SH, chip reports %d\n", + cu_info.num_shader_arrays_per_engine * cu_info.num_shader_engines); + return; + } + /* Count active CUs per SH. + * + * Some CUs in an SH may be disabled. HW expects disabled CUs to be + * represented in the high bits of each SH's enable mask (the upper and lower + * 16 bits of se_mask) and will take care of the actual distribution of + * disabled CUs within each SH automatically. + * Each half of se_mask must be filled only on bits 0-cu_per_sh[se][sh]-1. + * + * See note on Arcturus cu_bitmap layout in gfx_v9_0_get_cu_info. + */ for (se = 0; se < cu_info.num_shader_engines; se++) for (sh = 0; sh < cu_info.num_shader_arrays_per_engine; sh++) - cu_per_se[se] += hweight32(cu_info.cu_bitmap[se % 4][sh + (se / 4)]); - - /* Symmetrically map cu_mask to all SEs: - * cu_mask[0] bit0 -> se_mask[0] bit0; - * cu_mask[0] bit1 -> se_mask[1] bit0; - * ... (if # SE is 4) - * cu_mask[0] bit4 -> se_mask[0] bit1; + cu_per_sh[se][sh] = hweight32(cu_info.cu_bitmap[se % 4][sh + (se / 4)]); + + /* Symmetrically map cu_mask to all SEs & SHs: + * se_mask programs up to 2 SH in the upper and lower 16 bits. + * + * Examples + * Assuming 1 SH/SE, 4 SEs: + * cu_mask[0] bit0 -> se_mask[0] bit0 + * cu_mask[0] bit1 -> se_mask[1] bit0 + * ... + * cu_mask[0] bit4 -> se_mask[0] bit1 + * ... + * + * Assuming 2 SH/SE, 4 SEs + * cu_mask[0] bit0 -> se_mask[0] bit0 (SE0,SH0,CU0) + * cu_mask[0] bit1 -> se_mask[1] bit0 (SE1,SH0,CU0) + * ... + * cu_mask[0] bit4 -> se_mask[0] bit16 (SE0,SH1,CU0) + * cu_mask[0] bit5 -> se_mask[1] bit16 (SE1,SH1,CU0) + * ... + * cu_mask[0] bit8 -> se_mask[0] bit1 (SE0,SH0,CU1) * ... + * + * First ensure all CUs are disabled, then enable user specified CUs. */ - se = 0; - for (i = 0; i < cu_mask_count; i++) { - if (cu_mask[i / 32] & (1 << (i % 32))) - se_mask[se] |= 1 << cu; - - do { - se++; - if (se == cu_info.num_shader_engines) { - se = 0; - cu++; + for (i = 0; i < cu_info.num_shader_engines; i++) + se_mask[i] = 0; + + i = 0; + for (cu = 0; cu < 16; cu++) { + for (sh = 0; sh < cu_info.num_shader_arrays_per_engine; sh++) { + for (se = 0; se < cu_info.num_shader_engines; se++) { + if (cu_per_sh[se][sh] > cu) { + if (cu_mask[i / 32] & (1 << (i % 32))) + se_mask[se] |= 1 << (cu + sh * 16); + i++; + if (i == cu_mask_count) + return; + } } - } while (cu >= cu_per_se[se] && cu < 32); + } } } diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h index fbdb16418847..4edc012e3138 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.h @@ -27,6 +27,7 @@ #include "kfd_priv.h"
#define KFD_MAX_NUM_SE 8 +#define KFD_MAX_NUM_SH_PER_SE 2
/** * struct mqd_manager