From: Samuel Holland samuel@sholland.org
stable inclusion from stable-v5.10.138 commit d35d9bba2940fe46989736ea5a8b3b9471e6690e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I60QFD
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit fc153c8f283bf5925615195fc9d4056414d7b168 upstream.
H6 requires I/O bias configuration on both of its PIO devices. Previously it was only done for the main PIO.
The setting for Port L is at bit 0, so the bank calculation needs to account for the pin base. Otherwise the wrong bit is used.
Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6") Reviewed-by: Jernej Skrabec jernej.skrabec@gmail.com Tested-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Samuel Holland samuel@sholland.org Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Wei Li liwei391@huawei.com --- drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 1 + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c index 4557e18d5989..12c40f9c1a24 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c @@ -105,6 +105,7 @@ static const struct sunxi_pinctrl_desc sun50i_h6_r_pinctrl_data = { .npins = ARRAY_SIZE(sun50i_h6_r_pins), .pin_base = PL_BASE, .irq_banks = 2, + .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL, };
static int sun50i_h6_r_pinctrl_probe(struct platform_device *pdev) diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index 24c861434bf1..e4b41cc6c586 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -624,7 +624,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl, unsigned pin, struct regulator *supply) { - unsigned short bank = pin / PINS_PER_BANK; + unsigned short bank; unsigned long flags; u32 val, reg; int uV; @@ -640,6 +640,9 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl, if (uV == 0) return 0;
+ pin -= pctl->desc->pin_base; + bank = pin / PINS_PER_BANK; + switch (pctl->desc->io_bias_cfg_variant) { case BIAS_VOLTAGE_GRP_CONFIG: /* @@ -657,8 +660,6 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl, else val = 0xD; /* 3.3V */
- pin -= pctl->desc->pin_base; - reg = readl(pctl->membase + sunxi_grp_config_reg(pin)); reg &= ~IO_BIAS_MASK; writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));