From: Qiuxu Zhuo qiuxu.zhuo@intel.com
mainline inclusion from mainline-v5.1-rc1 commit d4dc89d069aab9074e2493a4c2f3969a0a0b91c1 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I47H3V CVE: NA
--------------------------------
commit d4dc89d069aab9074e2493a4c2f3969a0a0b91c1 upstream.
This driver supports the Intel 10nm series server integrated memory controller. It gets the memory capacity and topology information by reading the registers in PCI configuration space and memory-mapped I/O.
It decodes the memory error address to the platform specific address by using the ACPI Address Translation (ADXL) Device Specific Method (DSM).
Co-developed-by: Tony Luck tony.luck@intel.com Signed-off-by: Qiuxu Zhuo qiuxu.zhuo@intel.com Signed-off-by: Tony Luck tony.luck@intel.com Signed-off-by: Borislav Petkov bp@suse.de Cc: James Morse james.morse@arm.com Cc: Mauro Carvalho Chehab mchehab@kernel.org Cc: linux-edac linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20190130191519.15393-5-tony.luck@intel.com Signed-off-by: Youquan Song youquan.song@intel.com Signed-off-by: Jackie Liu liuyun01@kylinos.cn Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Xie XiuQi xiexiuqi@huawei.com Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/edac/Kconfig | 12 ++ drivers/edac/Makefile | 3 + drivers/edac/i10nm_base.c | 275 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 290 insertions(+) create mode 100644 drivers/edac/i10nm_base.c
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index c927c8a68dd9..1886c8e49604 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -241,6 +241,18 @@ config EDAC_SKX system has non-volatile DIMMs you should also manually select CONFIG_ACPI_NFIT.
+config EDAC_I10NM + tristate "Intel 10nm server Integrated MC" + depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG + depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y + select DMI + select ACPI_ADXL if ACPI + help + Support for error detection and correction the Intel + 10nm server Integrated Memory Controllers. If your + system has non-volatile DIMMs you should also manually + select CONFIG_ACPI_NFIT. + config EDAC_PND2 tristate "Intel Pondicherry2" depends on PCI && X86_64 && X86_MCE_INTEL diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index b250d59910ba..3cd809d92c74 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -60,6 +60,9 @@ obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o skx_edac-y := skx_common.o skx_base.o obj-$(CONFIG_EDAC_SKX) += skx_edac.o
+i10nm_edac-y := skx_common.o i10nm_base.o +obj-$(CONFIG_EDAC_I10NM) += i10nm_edac.o + obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c new file mode 100644 index 000000000000..c334fb7c63df --- /dev/null +++ b/drivers/edac/i10nm_base.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Intel(R) 10nm server memory controller. + * Copyright (c) 2019, Intel Corporation. + * + */ + +#include <linux/kernel.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/mce.h> +#include "edac_module.h" +#include "skx_common.h" + +#define I10NM_REVISION "v0.0.3" +#define EDAC_MOD_STR "i10nm_edac" + +/* Debug macros */ +#define i10nm_printk(level, fmt, arg...) \ + edac_printk(level, "i10nm", fmt, ##arg) + +#define I10NM_GET_SCK_BAR(d, reg) \ + pci_read_config_dword((d)->uracu, 0xd0, &(reg)) +#define I10NM_GET_IMC_BAR(d, i, reg) \ + pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg)) +#define I10NM_GET_DIMMMTR(m, i, j) \ + (*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4)) +#define I10NM_GET_MCDDRTCFG(m, i, j) \ + (*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4)) + +#define I10NM_GET_SCK_MMIO_BASE(reg) (GET_BITFIELD(reg, 0, 28) << 23) +#define I10NM_GET_IMC_MMIO_OFFSET(reg) (GET_BITFIELD(reg, 0, 10) << 12) +#define I10NM_GET_IMC_MMIO_SIZE(reg) ((GET_BITFIELD(reg, 13, 23) - \ + GET_BITFIELD(reg, 0, 10) + 1) << 12) + +static struct list_head *i10nm_edac_list; + +static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus, + unsigned int dev, unsigned int fun) +{ + struct pci_dev *pdev; + + pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun)); + if (!pdev) { + edac_dbg(2, "No device %02x:%02x.%x\n", + bus, dev, fun); + return NULL; + } + + if (unlikely(pci_enable_device(pdev) < 0)) { + edac_dbg(2, "Failed to enable device %02x:%02x.%x\n", + bus, dev, fun); + return NULL; + } + + pci_dev_get(pdev); + + return pdev; +} + +static int i10nm_get_all_munits(void) +{ + struct pci_dev *mdev; + void __iomem *mbase; + unsigned long size; + struct skx_dev *d; + int i, j = 0; + u32 reg, off; + u64 base; + + list_for_each_entry(d, i10nm_edac_list, list) { + d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1); + if (!d->util_all) + return -ENODEV; + + d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1); + if (!d->uracu) + return -ENODEV; + + if (I10NM_GET_SCK_BAR(d, reg)) { + i10nm_printk(KERN_ERR, "Failed to socket bar\n"); + return -ENODEV; + } + + base = I10NM_GET_SCK_MMIO_BASE(reg); + edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n", + j++, base, reg); + + for (i = 0; i < I10NM_NUM_IMC; i++) { + mdev = pci_get_dev_wrapper(d->seg, d->bus[0], + 12 + i, 0); + if (i == 0 && !mdev) { + i10nm_printk(KERN_ERR, "No IMC found\n"); + return -ENODEV; + } + if (!mdev) + continue; + + d->imc[i].mdev = mdev; + + if (I10NM_GET_IMC_BAR(d, i, reg)) { + i10nm_printk(KERN_ERR, "Failed to get mc bar\n"); + return -ENODEV; + } + + off = I10NM_GET_IMC_MMIO_OFFSET(reg); + size = I10NM_GET_IMC_MMIO_SIZE(reg); + edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n", + i, base + off, size, reg); + + mbase = ioremap(base + off, size); + if (!mbase) { + i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n", + base + off); + return -ENODEV; + } + + d->imc[i].mbase = mbase; + } + } + + return 0; +} + +static const struct x86_cpu_id i10nm_cpuids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_TREMONT_X, 0, 0 }, + { } +}; +MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids); + +static bool i10nm_check_ecc(struct skx_imc *imc, int chan) +{ + u32 mcmtr; + + mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000); + edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr); + + return !!GET_BITFIELD(mcmtr, 2, 2); +} + +static int i10nm_get_dimm_config(struct mem_ctl_info *mci) +{ + struct skx_pvt *pvt = mci->pvt_info; + struct skx_imc *imc = pvt->imc; + struct dimm_info *dimm; + u32 mtr, mcddrtcfg; + int i, j, ndimms; + + for (i = 0; i < I10NM_NUM_CHANNELS; i++) { + if (!imc->mbase) + continue; + + ndimms = 0; + for (j = 0; j < I10NM_NUM_DIMMS; j++) { + dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, + mci->n_layers, i, j, 0); + mtr = I10NM_GET_DIMMMTR(imc, i, j); + mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j); + edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n", + mtr, mcddrtcfg, imc->mc, i, j); + + if (IS_DIMM_PRESENT(mtr)) + ndimms += skx_get_dimm_info(mtr, 0, dimm, + imc, i, j); + else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) + ndimms += skx_get_nvdimm_info(dimm, imc, i, j, + EDAC_MOD_STR); + } + if (ndimms && !i10nm_check_ecc(imc, 0)) { + i10nm_printk(KERN_ERR, "ECC is disabled on imc %d\n", + imc->mc); + return -ENODEV; + } + } + + return 0; +} + +static struct notifier_block i10nm_mce_dec = { + .notifier_call = skx_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +static int __init i10nm_init(void) +{ + u8 mc = 0, src_id = 0, node_id = 0; + const struct x86_cpu_id *id; + const char *owner; + struct skx_dev *d; + int rc, i, off[3] = {0xd0, 0xc8, 0xcc}; + u64 tolm, tohm; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + id = x86_match_cpu(i10nm_cpuids); + if (!id) + return -ENODEV; + + rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm); + if (rc) + return rc; + + rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list); + if (rc < 0) + goto fail; + if (rc == 0) { + i10nm_printk(KERN_ERR, "No memory controllers found\n"); + return -ENODEV; + } + + rc = i10nm_get_all_munits(); + if (rc < 0) + goto fail; + + list_for_each_entry(d, i10nm_edac_list, list) { + rc = skx_get_src_id(d, &src_id); + if (rc < 0) + goto fail; + + rc = skx_get_node_id(d, &node_id); + if (rc < 0) + goto fail; + + edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id); + for (i = 0; i < I10NM_NUM_IMC; i++) { + if (!d->imc[i].mdev) + continue; + + d->imc[i].mc = mc++; + d->imc[i].lmc = i; + d->imc[i].src_id = src_id; + d->imc[i].node_id = node_id; + + rc = skx_register_mci(&d->imc[i], d->imc[i].mdev, + "Intel_10nm Socket", EDAC_MOD_STR, + i10nm_get_dimm_config); + if (rc < 0) + goto fail; + } + } + + rc = skx_adxl_get(); + if (rc) + goto fail; + + opstate_init(); + mce_register_decode_chain(&i10nm_mce_dec); + setup_skx_debug("i10nm_test"); + + i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION); + + return 0; +fail: + skx_remove(); + return rc; +} + +static void __exit i10nm_exit(void) +{ + edac_dbg(2, "\n"); + teardown_skx_debug(); + mce_unregister_decode_chain(&i10nm_mce_dec); + skx_adxl_put(); + skx_remove(); +} + +module_init(i10nm_init); +module_exit(i10nm_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors");