From: Yazen Ghannam yazen.ghannam@amd.com
mainline inclusion from mainline-v5.4-rc1 commit 353a1fcb8f9e5857c0fb720b9e57a86c1fb7c17e category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4MKP4 CVE: NA
--------------------------------
Currently, the DIMM info for AMD Family 17h systems is initialized in init_csrows(). This function is shared with legacy systems, and it has a limit of two channel support.
This prevents initialization of the DIMM info for a number of ranks, so there will be missing ranks in the EDAC sysfs.
Create a new init_csrows_df() for Family17h+ and revert init_csrows() back to pre-Family17h support.
Loop over all channels in the new function in order to support systems with more than two channels.
Signed-off-by: Yazen Ghannam yazen.ghannam@amd.com Signed-off-by: Borislav Petkov bp@suse.de Cc: "linux-edac@vger.kernel.org" linux-edac@vger.kernel.org Cc: James Morse james.morse@arm.com Cc: Mauro Carvalho Chehab mchehab@kernel.org Cc: Tony Luck tony.luck@intel.com Link: https://lkml.kernel.org/r/20190821235938.118710-4-Yazen.Ghannam@amd.com Signed-off-by: Jackie Liu liuyun01@kylinos.cn #openEuler_contributor Signed-off-by: Laibin Qiu qiulaibin@huawei.com --- drivers/edac/amd64_edac.c | 66 ++++++++++++++++++++++++++++++--------- 1 file changed, 52 insertions(+), 14 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c31de480185e..db89386c85bf 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2799,6 +2799,49 @@ static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig) return nr_pages; }
+static int init_csrows_df(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + enum edac_type edac_mode = EDAC_NONE; + enum dev_type dev_type = DEV_UNKNOWN; + struct dimm_info *dimm; + int empty = 1; + u8 umc, cs; + + if (mci->edac_ctl_cap & EDAC_FLAG_S16ECD16ED) { + edac_mode = EDAC_S16ECD16ED; + dev_type = DEV_X16; + } else if (mci->edac_ctl_cap & EDAC_FLAG_S8ECD8ED) { + edac_mode = EDAC_S8ECD8ED; + dev_type = DEV_X8; + } else if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED) { + edac_mode = EDAC_S4ECD4ED; + dev_type = DEV_X4; + } else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED) { + edac_mode = EDAC_SECDED; + } + + for_each_umc(umc) { + for_each_chip_select(cs, umc, pvt) { + if (!csrow_enabled(cs, umc, pvt)) + continue; + + empty = 0; + dimm = mci->csrows[cs]->channels[umc]->dimm; + + edac_dbg(1, "MC node: %d, csrow: %d\n", + pvt->mc_node_id, cs); + + dimm->nr_pages = get_csrow_nr_pages(pvt, umc, cs); + dimm->mtype = pvt->dram_type; + dimm->edac_mode = edac_mode; + dimm->dtype = dev_type; + } + } + + return empty; +} + /* * Initialize the array of csrow attribute instances, based on the values * from pci config hardware registers. @@ -2813,15 +2856,16 @@ static int init_csrows(struct mem_ctl_info *mci) int nr_pages = 0; u32 val;
- if (!pvt->umc) { - amd64_read_pci_cfg(pvt->F3, NBCFG, &val); + if (pvt->umc) + return init_csrows_df(mci); + + amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
- pvt->nbcfg = val; + pvt->nbcfg = val;
- edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n", - pvt->mc_node_id, val, - !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE)); - } + edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n", + pvt->mc_node_id, val, + !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
/* * We iterate over DCT0 here but we look at DCT1 in parallel, if needed. @@ -2858,13 +2902,7 @@ static int init_csrows(struct mem_ctl_info *mci) edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
/* Determine DIMM ECC mode: */ - if (pvt->umc) { - if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED) - edac_mode = EDAC_S4ECD4ED; - else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED) - edac_mode = EDAC_SECDED; - - } else if (pvt->nbcfg & NBCFG_ECC_ENABLE) { + if (pvt->nbcfg & NBCFG_ECC_ENABLE) { edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL) ? EDAC_S4ECD4ED : EDAC_SECDED;