driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6NX2M CVE: NA
----------------------------------------------------------------------
This fix commit c723ada86707c6afe524b51126c301d689c64d8e.
In that commit, if the softreset fails upon certain conditions, just disable the PHY associated with the disk. The user needs to restore the PHY.
SATA disks do not support simultaneous connection of multiple hosts. Therefore, when multiple controllers are connected to a SATA disk at the same time, the controller which is connected later failed to issue an ATA softreset to the SATA disk. As a result, the PHY associated with the disk is disabled and cannot be automatically recovered.
Now that, we will not focus on the execution result of softreset. No matter whether the execution is successful or not, we will directly carry out I_T_nexus_reset.
Signed-off-by: Yihang Li liyihang9@huawei.com Signed-off-by: xiabing xiabing12@h-partners.com --- drivers/scsi/hisi_sas/hisi_sas_main.c | 29 +++++---------------------- 1 file changed, 5 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index b8249a055fbb..0f5578e52558 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -1895,33 +1895,14 @@ static int hisi_sas_I_T_nexus_reset(struct domain_device *device) } hisi_sas_dereg_device(hisi_hba, device);
- rc = hisi_sas_debug_I_T_nexus_reset(device); - if (rc == TMF_RESP_FUNC_COMPLETE && dev_is_sata(device)) { - struct sas_phy *local_phy; - + if (dev_is_sata(device)) { rc = hisi_sas_softreset_ata_disk(device); - switch (rc) { - case -ECOMM: - rc = -ENODEV; - break; - case TMF_RESP_FUNC_FAILED: - case -EMSGSIZE: - case -EIO: - local_phy = sas_get_local_phy(device); - rc = sas_phy_enable(local_phy, 0); - if (!rc) { - local_phy->enabled = 0; - dev_err(dev, "Disabled local phy of ATA disk %016llx due to softreset fail (%d)\n", - SAS_ADDR(device->sas_addr), rc); - rc = -ENODEV; - } - sas_put_local_phy(local_phy); - break; - default: - break; - } + if (rc == TMF_RESP_FUNC_FAILED) + dev_err(dev, "ata disk %016llx reset (%d)\n", + SAS_ADDR(device->sas_addr), rc); }
+ rc = hisi_sas_debug_I_T_nexus_reset(device); if ((rc == TMF_RESP_FUNC_COMPLETE) || (rc == -ENODEV)) hisi_sas_release_task(hisi_hba, device);