From: John Garry john.g.garry@oracle.com
maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9VTE3 CVE: NA
Reference: https://lore.kernel.org/all/20240326133813.3224593-1-john.g.garry@oracle.com...
--------------------------------
Add atomic write support, as follows: - add helper functions to get request_queue atomic write limits - report request_queue atomic write support limits to sysfs and update Doc - support to safely merge atomic writes - deal with splitting atomic writes - misc helper functions - add a per-request atomic write flag
New request_queue limits are added, as follows: - atomic_write_hw_max is set by the block driver and is the maximum length of an atomic write which the device may support. It is not necessarily a power-of-2. - atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and max_hw_sectors. It is always a power-of-2. Atomic writes may be merged, and atomic_write_max_sectors would be the limit on a merged atomic write request size. This value is not capped at max_sectors, as the value in max_sectors can be controlled from userspace, and it would only cause trouble if userspace could limit atomic_write_unit_max_bytes and the other atomic write limits. - atomic_write_hw_unit_{min,max} are set by the block driver and are the min/max length of an atomic write unit which the device may support. They both must be a power-of-2. Typically atomic_write_hw_unit_max will hold the same value as atomic_write_hw_max. - atomic_write_unit_{min,max} are derived from atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits. Both min and max values must be a power-of-2. - atomic_write_hw_boundary is set by the block driver. If non-zero, it indicates an LBA space boundary at which an atomic write straddles no longer is atomically executed by the disk. The value must be a power-of-2. Note that it would be acceptable to enforce a rule that atomic_write_hw_boundary_sectors is a multiple of atomic_write_hw_unit_max, but the resultant code would be more complicated.
All atomic writes limits are by default set 0 to indicate no atomic write support. Even though it is assumed by Linux that a logical block can always be atomically written, we ignore this as it is not of particular interest. Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a single request. As such, only a single BIO must be submitted to the block layer for an atomic write. When a single atomic write BIO is submitted, it cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited by the maximum guaranteed BIO size which will not be required to be split. This max size is calculated by request_queue max segments and the number of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each segment containing PAGE_SIZE of data, apart from the first+last, which each can fit logical block size of data. The first+last will be LBS length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits: - atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in bytes - atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in bytes - atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in bytes - atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under the following conditions: - total resultant request length <= atomic_write_max_bytes - the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether atomic writes may be issued to a bdev. If a bdev is a partition, the partition start must be aligned with both atomic_write_unit_min_sectors and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO submitted will be of valid size, so add blk_validate_atomic_write_op_size() for this purpose. Userspace expects an atomic write which is of invalid size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use BLK_STS_INVAL for when a BIO needs to be split, as this should mean an invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: John Garry john.g.garry@oracle.com Signed-off-by: Long Li leo.lilong@huawei.com --- Documentation/ABI/testing/sysfs-block | 52 +++++++++++++++ block/blk-core.c | 21 ++++++ block/blk-merge.c | 95 ++++++++++++++++++++++++++- block/blk-settings.c | 94 ++++++++++++++++++++++++++ block/blk-sysfs.c | 33 ++++++++++ include/linux/blk_types.h | 7 ++ include/linux/blkdev.h | 65 ++++++++++++++++++ 7 files changed, 366 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index e34cdeeeb9d4..6cee984819b3 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -97,6 +97,58 @@ Description: indicates how many bytes the beginning of the device is offset from the disk's natural alignment.
+What: /sys/block/<disk>/atomic_write_max_bytes +Date: February 2024 +Contact: Himanshu Madhani himanshu.madhani@oracle.com +Description: + [RO] This parameter specifies the maximum atomic write + size reported by the device. This parameter is relevant + for merging of writes, where a merged atomic write + operation must not exceed this number of bytes. + This parameter may be greater to the value in + atomic_write_unit_max_bytes as + atomic_write_unit_max_bytes will be rounded down to a + power-of-two and atomic_write_unit_max_bytes may also be + limited by some other queue limits, such as max_segments. + This parameter - along with atomic_write_unit_min_bytes + and atomic_write_unit_max_bytes - will not be larger than + max_hw_sectors_kb, but may be larger than max_sectors_kb. + + +What: /sys/block/<disk>/atomic_write_unit_min_bytes +Date: February 2024 +Contact: Himanshu Madhani himanshu.madhani@oracle.com +Description: + [RO] This parameter specifies the smallest block which can + be written atomically with an atomic write operation. All + atomic write operations must begin at a + atomic_write_unit_min boundary and must be multiples of + atomic_write_unit_min. This value must be a power-of-two. + + +What: /sys/block/<disk>/atomic_write_unit_max_bytes +Date: February 2024 +Contact: Himanshu Madhani himanshu.madhani@oracle.com +Description: + [RO] This parameter defines the largest block which can be + written atomically with an atomic write operation. This + value must be a multiple of atomic_write_unit_min and must + be a power-of-two. This value will not be larger than + atomic_write_max_bytes. + + +What: /sys/block/<disk>/atomic_write_boundary_bytes +Date: February 2024 +Contact: Himanshu Madhani himanshu.madhani@oracle.com +Description: + [RO] A device may need to internally split I/Os which + straddle a given logical block address boundary. In that + case a single atomic write operation will be processed as + one of more sub-operations which each complete atomically. + This parameter specifies the size in bytes of the atomic + boundary if one is reported by the device. This value must + be a power-of-two. + What: /sys/block/<disk>/<partition>/alignment_offset Date: April 2009 Contact: Martin K. Petersen martin.petersen@oracle.com diff --git a/block/blk-core.c b/block/blk-core.c index 7950063c0345..27f356c07d26 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -205,6 +205,8 @@ static const struct { [BLK_STS_ZONE_OPEN_RESOURCE] = { -ETOOMANYREFS, "open zones exceeded" }, [BLK_STS_ZONE_ACTIVE_RESOURCE] = { -EOVERFLOW, "active zones exceeded" },
+ [BLK_STS_INVAL] = { -EINVAL, "invalid" }, + /* everything else not covered above: */ [BLK_STS_IOERR] = { -EIO, "I/O" }, }; @@ -819,6 +821,18 @@ static inline blk_status_t blk_check_zone_append(struct request_queue *q, return BLK_STS_OK; }
+static blk_status_t blk_validate_atomic_write_op_size(struct request_queue *q, + struct bio *bio) +{ + if (bio->bi_iter.bi_size > queue_atomic_write_unit_max_bytes(q)) + return BLK_STS_INVAL; + + if (bio->bi_iter.bi_size % queue_atomic_write_unit_min_bytes(q)) + return BLK_STS_INVAL; + + return BLK_STS_OK; +} + static noinline_for_stack bool submit_bio_checks(struct bio *bio) { struct request_queue *q = bio->bi_disk->queue; @@ -900,6 +914,13 @@ static noinline_for_stack bool submit_bio_checks(struct bio *bio) if (!q->limits.max_write_zeroes_sectors) goto not_supported; break; + case REQ_OP_WRITE: + if (bio->bi_opf & REQ_ATOMIC) { + status = blk_validate_atomic_write_op_size(q, bio); + if (status != BLK_STS_OK) + goto end_io; + } + break; default: break; } diff --git a/block/blk-merge.c b/block/blk-merge.c index a65d1d275040..7ca680a6c037 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -13,6 +13,46 @@ #include "blk.h" #include "blk-rq-qos.h"
+/* + * rq_straddles_atomic_write_boundary - check for boundary violation + * @rq: request to check + * @front: data size to be appended to front + * @back: data size to be appended to back + * + * Determine whether merging a request or bio into another request will result + * in a merged request which straddles an atomic write boundary. + * + * The value @front_adjust is the data which would be appended to the front of + * @rq, while the value @back_adjust is the data which would be appended to the + * back of @rq. Callers will typically only have either @front_adjust or + * @back_adjust as non-zero. + * + */ +static bool rq_straddles_atomic_write_boundary(struct request *rq, + unsigned int front_adjust, + unsigned int back_adjust) +{ + unsigned int boundary = queue_atomic_write_boundary_bytes(rq->q); + u64 mask, start_rq_pos, end_rq_pos; + + if (!boundary) + return false; + + start_rq_pos = blk_rq_pos(rq) << SECTOR_SHIFT; + end_rq_pos = start_rq_pos + blk_rq_bytes(rq) - 1; + + start_rq_pos -= front_adjust; + end_rq_pos += back_adjust; + + mask = ~(boundary - 1); + + /* Top bits are different, so crossed a boundary */ + if ((start_rq_pos & mask) != (end_rq_pos & mask)) + return true; + + return false; +} + static inline bool bio_will_gap(struct request_queue *q, struct request *prev_rq, struct bio *prev, struct bio *next) { @@ -145,11 +185,20 @@ static inline unsigned get_max_io_size(struct request_queue *q, struct bio *bio) { unsigned sectors = blk_max_size_offset(q, bio->bi_iter.bi_sector, 0); - unsigned max_sectors = sectors; + unsigned max_sectors; unsigned pbs = queue_physical_block_size(q) >> SECTOR_SHIFT; unsigned lbs = queue_logical_block_size(q) >> SECTOR_SHIFT; unsigned start_offset = bio->bi_iter.bi_sector & (pbs - 1);
+ /* + * We ignore lim->max_sectors for atomic writes simply because + * it may less than the bio size, which we cannot tolerate. + */ + if (bio->bi_opf & REQ_ATOMIC) + max_sectors = q->limits.atomic_write_max_sectors; + else + max_sectors = sectors; + max_sectors += start_offset; max_sectors &= ~(pbs - 1); if (max_sectors > start_offset) @@ -278,6 +327,11 @@ static struct bio *blk_bio_segment_split(struct request_queue *q, *segs = nsegs; return NULL; split: + if (bio->bi_opf & REQ_ATOMIC) { + bio->bi_status = BLK_STS_INVAL; + bio_endio(bio); + return ERR_PTR(-EINVAL); + } *segs = nsegs; return bio_split(bio, sectors, GFP_NOIO, bs); } @@ -594,6 +648,13 @@ int ll_back_merge_fn(struct request *req, struct bio *bio, unsigned int nr_segs) return 0; }
+ if (req->cmd_flags & REQ_ATOMIC) { + if (rq_straddles_atomic_write_boundary(req, + bio->bi_iter.bi_size, 0)) { + return 0; + } + } + return ll_new_hw_segment(req, bio, nr_segs); }
@@ -613,6 +674,13 @@ static int ll_front_merge_fn(struct request *req, struct bio *bio, return 0; }
+ if (req->cmd_flags & REQ_ATOMIC) { + if (rq_straddles_atomic_write_boundary(req, + 0, bio->bi_iter.bi_size)) { + return 0; + } + } + return ll_new_hw_segment(req, bio, nr_segs); }
@@ -649,6 +717,13 @@ static int ll_merge_requests_fn(struct request_queue *q, struct request *req, blk_rq_get_max_sectors(req, blk_rq_pos(req))) return 0;
+ if (req->cmd_flags & REQ_ATOMIC) { + if (rq_straddles_atomic_write_boundary(req, + 0, blk_rq_bytes(next))) { + return 0; + } + } + total_phys_segments = req->nr_phys_segments + next->nr_phys_segments; if (total_phys_segments > blk_rq_get_max_segments(req)) return 0; @@ -721,6 +796,18 @@ static enum elv_merge blk_try_req_merge(struct request *req, return ELEVATOR_NO_MERGE; }
+static bool blk_atomic_write_mergeable_rq_bio(struct request *rq, + struct bio *bio) +{ + return (rq->cmd_flags & REQ_ATOMIC) == (bio->bi_opf & REQ_ATOMIC); +} + +static bool blk_atomic_write_mergeable_rqs(struct request *rq, + struct request *next) +{ + return (rq->cmd_flags & REQ_ATOMIC) == (next->cmd_flags & REQ_ATOMIC); +} + /* * For non-mq, this has to be called with the request spinlock acquired. * For mq with scheduling, the appropriate queue wide lock should be held. @@ -752,6 +839,9 @@ static struct request *attempt_merge(struct request_queue *q, if (req->ioprio != next->ioprio) return NULL;
+ if (!blk_atomic_write_mergeable_rqs(req, next)) + return NULL; + /* * If we are allowed to merge, then append bio list * from next to rq and release next. merge_requests_fn @@ -895,6 +985,9 @@ bool blk_rq_merge_ok(struct request *rq, struct bio *bio) if (rq->ioprio != bio_prio(bio)) return false;
+ if (blk_atomic_write_mergeable_rq_bio(rq, bio) == false) + return false; + return true; }
diff --git a/block/blk-settings.c b/block/blk-settings.c index c3aa7f8ee388..754b758946a9 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -127,6 +127,41 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 max_addr) } EXPORT_SYMBOL(blk_queue_bounce_limit);
+/* + * Returns max guaranteed bytes which we can fit in a bio. + * + * We always assume that we can fit in at least PAGE_SIZE in a segment, apart + * from first and last segments. + */ +static +unsigned int blk_queue_max_guaranteed_bio(struct queue_limits *limits) +{ + unsigned int max_segments = min((u16)BIO_MAX_PAGES, limits->max_segments); + unsigned int length; + + length = min(max_segments, 2U) * limits->logical_block_size; + if (max_segments > 2) + length += (max_segments - 2) * PAGE_SIZE; + + return length; +} + +static void blk_atomic_writes_update_limits(struct queue_limits *limits) +{ + unsigned int unit_limit = min(limits->max_hw_sectors << SECTOR_SHIFT, + blk_queue_max_guaranteed_bio(limits)); + + unit_limit = rounddown_pow_of_two(unit_limit); + + limits->atomic_write_max_sectors = + min(limits->atomic_write_hw_max >> SECTOR_SHIFT, + limits->max_hw_sectors); + limits->atomic_write_unit_min = + min(limits->atomic_write_hw_unit_min, unit_limit); + limits->atomic_write_unit_max = + min(limits->atomic_write_hw_unit_max, unit_limit); +} + /** * blk_queue_max_hw_sectors - set max sectors for a request for this queue * @q: the request queue for the device @@ -161,6 +196,9 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors); max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS); limits->max_sectors = max_sectors; + + blk_atomic_writes_update_limits(limits); + q->backing_dev_info->io_pages = max_sectors >> (PAGE_SHIFT - 9); } EXPORT_SYMBOL(blk_queue_max_hw_sectors); @@ -196,6 +234,62 @@ void blk_queue_max_discard_sectors(struct request_queue *q, } EXPORT_SYMBOL(blk_queue_max_discard_sectors);
+/** + * blk_queue_atomic_write_max_bytes - set max bytes supported by + * the device for atomic write operations. + * @q: the request queue for the device + * @bytes: maximum bytes supported + */ +void blk_queue_atomic_write_max_bytes(struct request_queue *q, + unsigned int bytes) +{ + q->limits.atomic_write_hw_max = bytes; + blk_atomic_writes_update_limits(&q->limits); +} +EXPORT_SYMBOL(blk_queue_atomic_write_max_bytes); + +/** + * blk_queue_atomic_write_boundary_bytes - Device's logical block address space + * which an atomic write should not cross. + * @q: the request queue for the device + * @bytes: must be a power-of-two. + */ +void blk_queue_atomic_write_boundary_bytes(struct request_queue *q, + unsigned int bytes) +{ + q->limits.atomic_write_hw_boundary = bytes; +} +EXPORT_SYMBOL(blk_queue_atomic_write_boundary_bytes); + +/** + * blk_queue_atomic_write_unit_min_bytes - smallest unit that can be written + * atomically to the device. + * @q: the request queue for the device + * @bytes: must be a power-of-two. + */ +void blk_queue_atomic_write_unit_min_bytes(struct request_queue *q, + unsigned int bytes) +{ + q->limits.atomic_write_hw_unit_min = bytes; + blk_atomic_writes_update_limits(&q->limits); +} +EXPORT_SYMBOL(blk_queue_atomic_write_unit_min_bytes); + +/* + * blk_queue_atomic_write_unit_max_bytes - largest unit that can be written + * atomically to the device. + * @q: the request queue for the device + * @bytes: must be a power-of-two. + */ +void blk_queue_atomic_write_unit_max_bytes(struct request_queue *q, + unsigned int bytes) +{ + q->limits.atomic_write_hw_unit_max = bytes; + blk_atomic_writes_update_limits(&q->limits); +} +EXPORT_SYMBOL(blk_queue_atomic_write_unit_max_bytes); + + /** * blk_queue_max_write_same_sectors - set max sectors for a single write same * @q: the request queue for the device diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index c95be9626a09..6916f1ed4590 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -126,6 +126,30 @@ static ssize_t queue_max_discard_segments_show(struct request_queue *q, return queue_var_show(queue_max_discard_segments(q), (page)); }
+static ssize_t queue_atomic_write_max_bytes_show(struct request_queue *q, + char *page) +{ + return queue_var_show(queue_atomic_write_max_bytes(q), page); +} + +static ssize_t queue_atomic_write_boundary_show(struct request_queue *q, + char *page) +{ + return queue_var_show(queue_atomic_write_boundary_bytes(q), page); +} + +static ssize_t queue_atomic_write_unit_min_show(struct request_queue *q, + char *page) +{ + return queue_var_show(queue_atomic_write_unit_min_bytes(q), page); +} + +static ssize_t queue_atomic_write_unit_max_show(struct request_queue *q, + char *page) +{ + return queue_var_show(queue_atomic_write_unit_max_bytes(q), page); +} + static ssize_t queue_max_integrity_segments_show(struct request_queue *q, char *page) { return queue_var_show(q->limits.max_integrity_segments, (page)); @@ -585,6 +609,11 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes"); QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes"); QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
+QUEUE_RO_ENTRY(queue_atomic_write_max_bytes, "atomic_write_max_bytes"); +QUEUE_RO_ENTRY(queue_atomic_write_boundary, "atomic_write_boundary_bytes"); +QUEUE_RO_ENTRY(queue_atomic_write_unit_max, "atomic_write_unit_max_bytes"); +QUEUE_RO_ENTRY(queue_atomic_write_unit_min, "atomic_write_unit_min_bytes"); + QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes"); QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes"); QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes"); @@ -639,6 +668,10 @@ static struct attribute *queue_attrs[] = { &queue_discard_max_entry.attr, &queue_discard_max_hw_entry.attr, &queue_discard_zeroes_data_entry.attr, + &queue_atomic_write_max_bytes_entry.attr, + &queue_atomic_write_boundary_entry.attr, + &queue_atomic_write_unit_min_entry.attr, + &queue_atomic_write_unit_max_entry.attr, &queue_write_same_max_entry.attr, &queue_write_zeroes_max_entry.attr, &queue_zone_append_max_entry.attr, diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 1853ec569b72..996e03d50f41 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -133,6 +133,11 @@ typedef u8 __bitwise blk_status_t; */ #define BLK_STS_ZONE_ACTIVE_RESOURCE ((__force blk_status_t)16)
+/* + * Invalid size or alignment. + */ +#define BLK_STS_INVAL ((__force blk_status_t)19) + /** * blk_path_error - returns true if error may be path related * @error: status the request was completed with @@ -421,6 +426,7 @@ enum req_flag_bits { /* for driver use */ __REQ_DRV, __REQ_SWAP, /* swapping request. */ + __REQ_ATOMIC, /* for atomic write operations */ __REQ_NR_BITS, /* stops here */ };
@@ -445,6 +451,7 @@ enum req_flag_bits {
#define REQ_DRV (1ULL << __REQ_DRV) #define REQ_SWAP (1ULL << __REQ_SWAP) +#define REQ_ATOMIC (1ULL << __REQ_ATOMIC)
#define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2d6747877f7c..a53e70a6aeec 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -346,6 +346,16 @@ struct queue_limits { unsigned int discard_granularity; unsigned int discard_alignment;
+ /* atomic write limits */ + unsigned int atomic_write_hw_max; + unsigned int atomic_write_max_sectors; + unsigned int atomic_write_hw_boundary; + unsigned int atomic_write_hw_unit_min; + unsigned int atomic_write_unit_min; + unsigned int atomic_write_hw_unit_max; + unsigned int atomic_write_unit_max; + + unsigned short max_segments; unsigned short max_integrity_segments; unsigned short max_discard_segments; @@ -1097,6 +1107,9 @@ static inline unsigned int blk_queue_get_max_sectors(struct request *rq) if (unlikely(op == REQ_OP_WRITE_ZEROES)) return q->limits.max_write_zeroes_sectors;
+ if (rq->cmd_flags & REQ_ATOMIC) + return q->limits.atomic_write_max_sectors; + return q->limits.max_sectors; }
@@ -1187,6 +1200,14 @@ extern void blk_queue_max_zone_append_sectors(struct request_queue *q, extern void blk_queue_physical_block_size(struct request_queue *, unsigned int); extern void blk_queue_alignment_offset(struct request_queue *q, unsigned int alignment); +void blk_queue_atomic_write_max_bytes(struct request_queue *q, + unsigned int bytes); +void blk_queue_atomic_write_boundary_bytes(struct request_queue *q, + unsigned int bytes); +void blk_queue_atomic_write_unit_max_bytes(struct request_queue *q, + unsigned int bytes); +void blk_queue_atomic_write_unit_min_bytes(struct request_queue *q, + unsigned int bytes); void blk_queue_update_readahead(struct request_queue *q); extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min); extern void blk_queue_io_min(struct request_queue *q, unsigned int min); @@ -1649,6 +1670,30 @@ static inline unsigned int bdev_max_active_zones(struct block_device *bdev) return 0; }
+static inline unsigned int +queue_atomic_write_unit_max_bytes(const struct request_queue *q) +{ + return q->limits.atomic_write_unit_max; +} + +static inline unsigned int +queue_atomic_write_unit_min_bytes(const struct request_queue *q) +{ + return q->limits.atomic_write_unit_min; +} + +static inline unsigned int +queue_atomic_write_boundary_bytes(const struct request_queue *q) +{ + return q->limits.atomic_write_hw_boundary; +} + +static inline unsigned int +queue_atomic_write_max_bytes(const struct request_queue *q) +{ + return q->limits.atomic_write_max_sectors << SECTOR_SHIFT; +} + static inline int queue_dma_alignment(const struct request_queue *q) { return q ? q->dma_alignment : 511; @@ -2102,4 +2147,24 @@ int fsync_bdev(struct block_device *bdev); struct super_block *freeze_bdev(struct block_device *bdev); int thaw_bdev(struct block_device *bdev, struct super_block *sb);
+static inline bool bdev_can_atomic_write(struct block_device *bdev) +{ + struct request_queue *bd_queue = bdev_get_queue(bdev); + struct queue_limits *limits = &bd_queue->limits; + + if (!limits->atomic_write_unit_min) + return false; + + if (bdev_is_partition(bdev)) { + sector_t bd_start_sect = bdev->bd_part->start_sect; + unsigned int alignment = + max(limits->atomic_write_unit_min, + limits->atomic_write_hw_boundary); + if (!IS_ALIGNED(bd_start_sect, alignment)) + return false; + } + + return true; +} + #endif /* _LINUX_BLKDEV_H */