From: Neil Armstrong narmstrong@baylibre.com
[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ]
In certain circumstances, the XHCI SuperSpeed instance in park mode can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high load on the single XHCI SuperSpeed instance, the controller can crash like: xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) xhci-hcd xhci-hcd.0.auto: HC died; cleaning up usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates the issue. The bit is described as : "When this bit is set to '1' all SS bus instances in park mode are disabled"
Synopsys explains: The GUCTL1.PARKMODE_DISABLE_SS is only available in dwc_usb3 controller running in host mode. This should not be set for other IPs. This can be disabled by default based on IP, but I recommend to have a property to enable this feature for devices that need this.
CC: Dongjin Kim tobetter@gmail.com Cc: Jianxin Pan jianxin.pan@amlogic.com Cc: Thinh Nguyen thinhn@synopsys.com Cc: Jun Li lijun.kernel@gmail.com Reported-by: Tim elatllat@gmail.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/core.c | 5 +++++ drivers/usb/dwc3/core.h | 4 ++++ 2 files changed, 9 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 6666d2a..60d0826 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -981,6 +981,9 @@ static int dwc3_core_init(struct dwc3 *dwc) if (dwc->dis_tx_ipgap_linecheck_quirk) reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
+ if (dwc->parkmode_disable_ss_quirk) + reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); }
@@ -1287,6 +1290,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, + "snps,parkmode-disable-ss-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 13102850..e34308d 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -242,6 +242,7 @@ #define DWC3_GUCTL_HSTINAUTORETRY BIT(14)
/* Global User Control 1 Register */ +#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
@@ -992,6 +993,8 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. + * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed + * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1163,6 +1166,7 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned parkmode_disable_ss_quirk:1;
unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2;