From: Hans de Goede hdegoede@redhat.com
commit 6ae01050e49f0080ae30575d9b45a6d4a3d7ee23 upstream.
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case.
This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL.
Cc: stable@vger.kernel.org Cc: Jason Anderson jasona.594@gmail.com Reported-by: Jason Anderson jasona.594@gmail.com Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yang Yingliang yangyingliang@huawei.com --- drivers/platform/x86/gpd-pocket-fan.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/platform/x86/gpd-pocket-fan.c b/drivers/platform/x86/gpd-pocket-fan.c index be85ed9..73eb157 100644 --- a/drivers/platform/x86/gpd-pocket-fan.c +++ b/drivers/platform/x86/gpd-pocket-fan.c @@ -16,17 +16,27 @@
#define MAX_SPEED 3
-static int temp_limits[3] = { 55000, 60000, 65000 }; +#define TEMP_LIMIT0_DEFAULT 55000 +#define TEMP_LIMIT1_DEFAULT 60000 +#define TEMP_LIMIT2_DEFAULT 65000 + +#define HYSTERESIS_DEFAULT 3000 + +#define SPEED_ON_AC_DEFAULT 2 + +static int temp_limits[3] = { + TEMP_LIMIT0_DEFAULT, TEMP_LIMIT1_DEFAULT, TEMP_LIMIT2_DEFAULT, +}; module_param_array(temp_limits, int, NULL, 0444); MODULE_PARM_DESC(temp_limits, "Millicelsius values above which the fan speed increases");
-static int hysteresis = 3000; +static int hysteresis = HYSTERESIS_DEFAULT; module_param(hysteresis, int, 0444); MODULE_PARM_DESC(hysteresis, "Hysteresis in millicelsius before lowering the fan speed");
-static int speed_on_ac = 2; +static int speed_on_ac = SPEED_ON_AC_DEFAULT; module_param(speed_on_ac, int, 0444); MODULE_PARM_DESC(speed_on_ac, "minimum fan speed to allow when system is powered by AC"); @@ -120,18 +130,21 @@ static int gpd_pocket_fan_probe(struct platform_device *pdev) if (temp_limits[i] < 40000 || temp_limits[i] > 70000) { dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n", temp_limits[i]); - return -EINVAL; + temp_limits[0] = TEMP_LIMIT0_DEFAULT; + temp_limits[1] = TEMP_LIMIT1_DEFAULT; + temp_limits[2] = TEMP_LIMIT2_DEFAULT; + break; } } if (hysteresis < 1000 || hysteresis > 10000) { dev_err(&pdev->dev, "Invalid hysteresis %d (must be between 1000 and 10000)\n", hysteresis); - return -EINVAL; + hysteresis = HYSTERESIS_DEFAULT; } if (speed_on_ac < 0 || speed_on_ac > MAX_SPEED) { dev_err(&pdev->dev, "Invalid speed_on_ac %d (must be between 0 and 3)\n", speed_on_ac); - return -EINVAL; + speed_on_ac = SPEED_ON_AC_DEFAULT; }
fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);