[PATCH OLK-5.10 1/1] scsi: hisi_sas: Configure the initialization registers according to HBA model
driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6ZGK8 CVE: NA
----------------------------------------------------------------------
We use init_reg_v3_hw() to set some registers, for the latest HBA devices, some of these HW registers are set through firmware. Therefore, different HBA models are distinguished through pci_dev->revision.
Signed-off-by: Yihang Li liyihang9@huawei.com Reviewed-by: Xiang Chen chenxiang66@hisilicon.com Signed-off-by: xiabing xiabing12@h-partners.com --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index eeb40ad079c8..6e40c4c06650 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -617,12 +617,12 @@ static void interrupt_enable_v3_hw(struct hisi_hba *hisi_hba)
static void init_reg_v3_hw(struct hisi_hba *hisi_hba) { + struct pci_dev *pdev = hisi_hba->pci_dev; int i, j;
/* Global registers init */ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, (u32)((1ULL << hisi_hba->queue_count) - 1)); - hisi_sas_write32(hisi_hba, SAS_AXI_USER3, 0); hisi_sas_write32(hisi_hba, CFG_MAX_TAG, 0xfff0400); hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108); hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1); @@ -642,6 +642,9 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba) hisi_sas_write32(hisi_hba, ARQOS_ARCACHE_CFG, 0xf0f0); hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1);
+ if (pdev->revision < 0x30) + hisi_sas_write32(hisi_hba, SAS_AXI_USER3, 0); + interrupt_enable_v3_hw(hisi_hba); for (i = 0; i < hisi_hba->n_phy; i++) { enum sas_linkrate max; @@ -659,7 +662,6 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba) prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max); hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, prog_phy_link_rate); - hisi_sas_phy_write32(hisi_hba, i, SERDES_CFG, 0xffc00); hisi_sas_phy_write32(hisi_hba, i, SAS_RX_TRAIN_TIMER, 0x13e80); hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff); hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff); @@ -670,13 +672,18 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba) hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x1); hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER, 0x7f7a120); hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x2a0a01); - hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG, 0x32); hisi_sas_phy_write32(hisi_hba, i, SAS_EC_INT_COAL_TIME, 0x30f4240); - /* used for 12G negotiate */ - hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e); hisi_sas_phy_write32(hisi_hba, i, AIP_LIMIT, 0x2ffff);
+ /* set value through firmware for the latest HBA */ + if (pdev->revision < 0x30) { + hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG, 0x32); + hisi_sas_phy_write32(hisi_hba, i, SERDES_CFG, 0xffc00); + /* used for 12G negotiate */ + hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e); + } + /* get default FFE configuration for BIST */ for (j = 0; j < FFE_CFG_MAX; j++) { u32 val = hisi_sas_phy_read32(hisi_hba, i,
-
Yihang Li